ページ1に含まれる内容の要旨
CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-FX742R
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de
desbetreffende handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
GET0114-001A
[E/EX]
Cover001AKS-
ページ2に含まれる内容の要旨
How to reset your unit While holding SEL (select), press (standby/on/attenuator) for more than 2 seconds. This will reset the built-in microcomputer. (standby/on/attenuator) SEL (select) Note: Your preset adjustments—such as preset channels or sound adjustments—will also be erased. How to use the MODE button If you press MODE, the unit goes into functions mode, then the number buttons and ¢ / 4 buttons work as different function buttons. Ex.: When number button 2 works as MO (monaural) butto
ページ3に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 OTHER MAIN FUNCTIONS ................ 22 How to use the MODE button ................... 2 Changing the general settings (PSM) ....... 22 Detaching the control panel ...................... 25 LOCATION OF THE BUTTONS ............ 4 Control pa
ページ4に含まれる内容の要旨
k LOCATION OF THE BUTTONS Control panel Display window ; a sd f g h j l / zx 1 23 4 5 6 78 9 p q w e r t y uio 1 (standby/on/attenuator) button Display window 2 TP/PTY (traffic programme/programme type) ; FM band indicators (FM1, FM2, FM3) button a AM band indicator 3 SEL (select) button s TAPE indicator 4 Display window d MP3 indicator 5 Cassette compartment • Lights up only when playing an MP3 disc on a 60 (eject) button JVC MP3-compatible CD changer. 7 FM/AM (DAB) button f Main display 8 TAPE
ページ5に含まれる内容の要旨
BASIC OPERATIONS 1 3 2 Turning on the power 3 Adjust the volume. 1 Turn on the power. To increase the volume To decrease the volume Note on One-Touch Operation: When you select a source in step 2 below, the Volume (or audio) level indicator power automatically comes on. You do not have (see page 24) to press this button to turn on the power. 2 Select the source. Volume level appears. 4 Adjust the sound as you want. (See pages 20 and 21.) To drop the volume in a moment To operate the tuner (FM or
ページ6に含まれる内容の要旨
Setting the clock 4 Set the clock system. 1 Select “24H/12H.” You can also set the clock system to either 2 Select “24H” or “12H.” 24 hours or 12 hours. 12 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 23.) 5 Finish the setting. 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. To check the current clock time or change the 2 Adjust the hour. display mode 12 Press DISP (display) repeatedly. Each time
ページ7に含まれる内容の要旨
RADIO OPERATIONS To stop searching before a station is Listening to the radio received, press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Searching a station automatically: Manual search Auto search 1 Select the band (FM1 – 3, AM). Each time you press the 1 Select the band (FM1 – 3, AM). button, the band changes as Each time you press the follows: button, the band chan
ページ8に含まれる内容の要旨
3 Tune in to a station you want while Storing stations in memory “M” (manual) is flashing. You can use one of the following two methods to store broadcasting stations in memory. To tune in to stations of higher • Automatic preset of FM stations: SSM (Strong- frequencies station Sequential Memory) • Manual preset of both FM and AM stations To tune in to stations of lower frequencies FM station automatic preset: SSM • If you release your finger from the button, You can preset 6 local FM stations i
ページ9に含まれる内容の要旨
Notes: Manual preset • A previously preset station is erased when a new You can preset up to 6 stations in each band station is stored in the same preset number. (FM1, FM2, FM3, and AM) manually. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, Ex.: Storing FM station of 88.3 MHz into the during battery replacement). If this occurs, preset preset number 1 of the FM1 band. the stations again. 1 Select the band (FM1 – 3, AM) you want to store st
ページ10に含まれる内容の要旨
RDS OPERATIONS To use Network-Tracking Reception What you can do with RDS You can select the different modes of network- RDS (Radio Data System) allows FM stations to tracking reception to continue listening to the send an additional signal along with their regular same programme in its finest reception. programme signals. For example, the stations When shipped from the factory, “AF” is selected. send their station names, as well as information about what type of programme they broadcast, • AF:
ページ11に含まれる内容の要旨
Using TA Standby Reception 1 Press and hold SEL (select) for more than 2 seconds so that one of the TA Standby Reception allows the unit to switch PSM items appears on the display. temporarily to Traffic Announcement (TA) from the current source (another FM station, tape, or (PSM: see page 23.) other connected components). • TA Standby Reception will not work if you are listening to an AM station. Press TP/PTY to activate TA Standby Reception. 2 Select “AF-REG” (alternative frequency/regionaliza
ページ12に含まれる内容の要旨
Using PTY Standby Reception 4 Finish the setting. PTY Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) from the current source (another FM station, tape, or other connected components). 7 When the current source is FM, the PTY • PTY Standby Reception will not work if you are indicator either lights up or flashes. listening to an AM station. • If the PTY indicator lights up, PTY Standby Reception is activated. You can select your favorite pr
ページ13に含まれる内容の要旨
Searching your favorite programme 2 Select one of the twenty-nine PTY codes. (See page 16.) You can search any one of the PTY codes. Selected code name In addition, you can store your 6 favorite appears on the display. programme types in the number buttons. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favorite programme types, see below. To search your favorite programme type, see 3 Press and hold the number button
ページ14に含まれる内容の要旨
• If there is a station broadcasting a programme To search your favorite programme type of the same PTY code as you selected, that station is tuned in. 1 Press and hold TP/PTY for more • If there is no station broadcasting a than 2 seconds while listening to an programme of the same PTY code as you FM station. selected, the station will not change. Note: In some areas, the PTY search will not work correctly. The last selected PTY code appears. Other convenient RDS 2 To select one of your favorit
ページ15に含まれる内容の要旨
Changing the display mode while Setting the TA volume level listening to an FM station You can preset the volume level for TA Standby Reception. When a traffic programme is received, You can change the initial indication on the the volume level automatically changes to the display to station name (PS NAME), station preset level. frequency (FREQ), or clock time (CLOCK) while • See also “Changing the general settings listening to an FM RDS station. (PSM)” on page 22. • See also “Changing the gener
ページ16に含まれる内容の要旨
PTY codes NEWS: News SOCIAL: Programmes on social AFFAIRS: Topical programmes expanding activities on current news or affairs RELIGION: Programmes dealing with any INFO: Programmes which impart aspect of belief or faith, or the advice on a wide variety of topics nature of existence or ethics SPORT: Sport events PHONE IN: Programmes where people can EDUCATE: Educational programmes express their views either by DRAMA: Radio plays phone or in a public forum CULTURE: Programmes on national or TRAVEL
ページ17に含まれる内容の要旨
TAPE OPERATIONS To stop play and eject the cassette Listening to a cassette Press 0. You can play back type I (normal) tapes. Tape play stops and the cassette automatically ejects from the cassette compartment. The source changes to the previously selected one. 1 Insert a cassette into the cassette If you change the source, tape play also stops compartment. (without ejecting the cassette this time). The unit turns on and tape • You can also eject the cassette by pressing 0 play starts automatica
ページ18に含まれる内容の要旨
Finding the beginning of a Other convenient tape tune functions Multi Music Scan allows you to automatically Skipping the blank portions on the start playback from the beginning of a specified tape tune. You can specify up to 9 tunes ahead of or You can skip blank portions between the tunes before the current tune. (Blank Skip). When this function is on, the unit skips blank During playback portions of 15 seconds or more, fast-forwards to the next tune, then starts playing it. Specify where (how
ページ19に含まれる内容の要旨
Playing the current tune repeatedly Prohibiting cassette ejection You can play the current tune repeatedly You can prohibit cassette ejection and lock a (Repeat Play). cassette in the cassette compartment. 1 Press MODE to enter the While pressing TAPE 23, press and functions mode while playing a hold 0 (eject) for more than 2 seconds. tune you want to repeat. 2 Press RPT (repeat), while still in the functions mode, so that the RPT indicator lights up on the display. Lights up when Repeat Play is
ページ20に含まれる内容の要旨
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level. You can adjust the sound characteristics to your To increase the level preference. 1 Select the item you want to adjust. Each time you press the To decrease the level button, the adjustable items change as follows: BAS TRE FAD (bass) (treble) (fader) Equalization pattern changes as you VOL LOUD BAL adjust the bass or treble. (volume) (loudness) (balance) Ex.: When you adjust “TRE” (treble) Indication To do: Range BAS Adjust the bass. –06
