ページ1に含まれる内容の要旨
CD RECEIVER KD-SX9350/KD-SX990
RECEPTOR CON CD KD-SX9350/KD-SX990
RECEPTEUR CD KD-SX9350/KD-SX990
KD-SX9350
ATT SOUND
U
R SOURCE F
D
VOL VOL
KD-SX990
ATT SOUND
U
R SOURCE F
D
VOL VOL
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the
cabinet.
ページ2に含まれる内容の要旨
INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
ページ3に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 MP3 OPERATIONS ......................... 18 How to use the MODE button ................... 3 Playing an MP3 disc ................................. 18 Locating a file or particular portion LOCATION OF THE BUTTONS ............ 4 on an MP3 dis
ページ4に含まれる内容の要旨
LOCATION OF THE BUTTONS Control panel Display window sd f g h jk l / z x c 1 2 34 5 6 7 8 9pq w e r t y u i o ; a 1 (standby/on/attenuator) button ; EQ (equalizer) button 25 (up) button a Auxiliary input jack (MP3 INPUT) +10 button 34 /¢ buttons Display window 4 Remote sensor s Disc information indicators 5 Display window TAG (ID3 Tag), (folder), (track/file) 60 (eject) button d CD–in indicator 7 FM/AM button f Main display 8 CD (CD-CH: CD changer) button g Playback item indicators 9 (control
ページ5に含まれる内容の要旨
3 • Selects the preset stations while listening to Remote controller the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. ATT SOUND • Skips to the first file of the previous folder while listening to an MP3 disc. Each time you press the button, you can move to the previous folder and start playing U the first file. • While playing an MP3 disc on an MP3- SOURCE R F compatible CD changer; D – Skips to the previous disc if pressed bri
ページ6に含まれる内容の要旨
3. Return the battery holder. Preparing the remote controller Insert again the battery holder by pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. Remote sensor (back side) WARNING: • Store the battery in a place where children cannot reach. • Do not expose the remote sensor to strong If a child accidentally swallows the battery, light (direct sunli
ページ7に含まれる内容の要旨
BASIC OPERATIONS 1 3 2 Volume level appears. Turning on the power 1 Turn on the power. Volume (or audio) level indicator Note on One-Touch Operation: (see page 27) When you select a source in step 2 below, the power automatically comes on. You do not have 4 Adjust the sound as you want. (See to press this button to turn on the power. pages 23 and 24.) 2 Select the source. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and the vo
ページ8に含まれる内容の要旨
2 Adjust the minute. Setting the clock 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 26.) 4 Finish the setting. 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. Note: To show the clock time on the display, see page 27. To check other information during play, press DISP (display). 2 Adjust the hour. Each time you press the button, the other information will be shown on the upper part of the display.
ページ9に含まれる内容の要旨
RADIO OPERATIONS To stop searching before a station is Listening to the radio received, press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Searching a station automatically: Manual search Auto search 1 Select the band (FM1 – 3, AM). 1 Select the band (FM1 – 3, AM). Each time you press the Each time you press the button, the band changes as button, the band changes as fo
ページ10に含まれる内容の要旨
Storing stations in memory 3 Tune in to a station you want while “MANU” (manual) is flashing. You can use one of the following two methods to To tune in to stations store broadcasting stations in memory. of higher frequencies • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations To tune in to stations of lower frequencies FM station automatic preset: SSM You can preset 6 local FM stations in each FM • If you release your finger from
ページ11に含まれる内容の要旨
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band numbers. (FM1, FM2, FM3, and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the Notes: preset number 1 of the FM1 band. • A previously preset station is erased when a new station is stored in the same preset number. 1 Select the band (FM1 – 3, AM) you • Preset stations are erased when the power supply to want to store stations into (in this the memory circu
ページ12に含まれる内容の要旨
CD OPERATIONS Refer “MP3 OPERATIONS” on pages 18 to 22 for The display changes to show the following: operating MP3 discs. Current source CD–in indicator indication* Playing a CD 1 Open the control panel. Total playing time Total track number of the inserted disc of the inserted disc Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD (CD-CH) turns on the unit and starts playback automatically. Elapsed playing time Current track 2 Insert a CD into the loading slot.
ページ13に含まれる内容の要旨
To stop play and eject the CD To go to a particular track directly Press 0. Press the number button corresponding to the CD play stops and the control panel flips down. track number to start its playback. The CD automatically ejects from the loading slot. The source changes to the previously selected source. • If you change the source, CD play also stops (without ejecting the CD). Next time you select “CD” as the source, CD • To select a track number from 1 – 6: play starts from where playback h
ページ14に含まれる内容の要旨
To play back tracks repeatedly How to use the +10 and –10 buttons (Track Repeat Play) • Ex. 1: To select track number 32 while You can play back the current track repeatedly. playing track number 6 1 Press MODE to enter the functions mode while playing a CD. “MODE” flashes on the upper part of the display. (Three times) (Twice) 2 Press RPT (repeat), while “MODE” Track 6 \ 10 \ 20 \ 30 \ 31 \ 32 is still flashing on the display, so that the “TRK RPT” appears on the • Ex. 2: To select track number
ページ15に含まれる内容の要旨
Playing a CD Text Prohibiting disc ejection In a CD Text, some information about the disc (its You can prohibit disc ejection and can lock a disc disc title, performer, and track title) is recorded. in the loading slot. This CD Text information will be shown automatically when you play a CD Text. While pressing CD (CD-CH), press and hold for more than 2 seconds. To change the CD Text information manually, select text display mode while playing a CD Text. Each time you press the button, the disp
ページ16に含まれる内容の要旨
MP3 INTRODUCTION Precautions when recording MP3 files What is MP3? on a CD-R or CD-RW MP3 is an abbreviation of Motion Picture Experts This unit can only read MP3 files that are Group (or MPEG) Audio Layer 3. MP3 is simply a recorded in the format that is compliant with ISO file format with a data compression ratio of 1:10 9660 Level 1, Level 2, or Joliet. (128 Kbps*). That means, by using MP3 format, one CD-R or CD-RW can contain 10 times as much data volume as a regular CD can. How are MP3 fil
ページ17に含まれる内容の要旨
MP3 folder/file configuration ROOT 01 02 04 08 1 2 3 4 03 05 09 10 11 20 21 5 6 06 07 7 8 9 12 13 22 23 24 14 15 16 17 18 19 : Root ROOT 01 : Folders : MP3 files Note: There is no limit on the number of the hierarchy levels (nested folders). However, up to 8 hierarchy levels is recommanded for stable operations. MP3 playback/search order • The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the MP3 files. Normally this unit plays back MP3 files in the r
ページ18に含まれる内容の要旨
MP3 OPERATIONS Refer also to “CD OPERATIONS” on pages The display changes to show the following: 12 to 15. Current source CD–in indicator indication* Playing an MP3 disc 1 Open the control panel. Note on One-Touch Operation: When a disc is already in the loading slot, Total folder Total file pressing CD (CD-CH) turns on the unit and number number starts playback automatically. 2 Insert an MP3 disc into the loading slot. The unit turns on, draws the disc and starts playback MP3 indicator automati
ページ19に含まれる内容の要旨
To stop play and eject the disc Locating a file or particular Press 0. portion on an MP3 disc Playback stops and the control panel flips down. The disc automatically ejects from the loading For “MP3 playback/search order” see page 17. slot. To fast-forward or reverse the file To change the display information Press and hold ¢ While playing back an MP3 file, while playing an MP3 disc, you can change MP3 disc to fast-forward the file. information shown on the display. Each time you press DISP (di
ページ20に含まれる内容の要旨
To go to a particular file quickly within the To go to a particular folder directly current folder (+10 and –10 buttons) IMPORTANT: 1 Press MODE to enter the functions mode To directly select the folders using the number while playing an MP3 disc. button(s), it is required that folders are “MODE” flashes on the upper assigned 2 digit numbers at the beginning of part of the display. their folder names. (This can only be done during the recording of CD-Rs or CD-RWs.) Ex.: If folder name is “01 ABC
