ページ1に含まれる内容の要旨
1000
D
CD RECEIVER KD-LH1000
RECEPTOR CON CD KD-LH1000
RECEPTEUR CD KD-LH1000
KD-LH1000
SOUND
U 200W
R SOURCE F
D
VOL VOL
• This unit is equipped with the display demonstration. To cancel it, see page 8.
• Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la página 8.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler, référez-
vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instala
ページ2に含まれる内容の要旨
Errata / Errata / Errata English Page 24 Incorrect Correct Notes: Notes: • When you try to assign a name to the 41st disc, • When you try to assign a name to the 41st disc, “Name Full” appears on the display. (In this you cannot ener the text entry mode (and will \ case, delete unwanted names before assignment.) hear a beep sound if “Beep” has been set to “On”: see page 24) (In this case, delete unwanted names before assignment.) Español Pàgina 24 Incorrecto Correcto Notes: Notes: • When you tr
ページ3に含まれる内容の要旨
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
ページ4に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 OTHER MAIN FUNCTIONS ............... 22 How to use the MODE (M) button ............ 3 Changing the general settings (PSM) ...... 22 Changing the display color ....................... 25 LOCATION OF THE BUTTONS ............ 4 Assigning names
ページ5に含まれる内容の要旨
1000 D- LOCATION OF THE BUTTONS Control panel 1 2 3 4 5 6 7 8 9 200W EQ E p q w e r t y u i o ; 1 (standby/on/attenuator) button w DISP (D) (display) button 2 SEL (select) button • Also functions as SSM buttons when pressed 3 Control dial together with MODE (M) button. 4 Display window e MODE (M) button 5 Number buttons • Also functions as SSM buttons when pressed 64 /¢ buttons together with DISP (D) (display) button. 75 (up) button r FM/AM button 80 (eject) button t CD/CD-CH button 9∞ (down) b
ページ6に含まれる内容の要旨
3 • Selects the preset stations while listening to Remote controller the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. • Skips to the previous disc while listening to ATT SOUND the CD changer. 1 5 Each time you press the button, the disc number decreases, and the selected disc 6 starts playing. 2 U 4 Functions the same as the control dial on the R SOURCE F main unit. 7 D 3 NOTE: These buttons do not function for the preferred se
ページ7に含まれる内容の要旨
1000 D 3. Return the battery holder. Preparing the remote controller Insert again the battery holder pushing it until Before using the remote controller: you hear a clicking sound. • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. (back side) Remote sensor 200W • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). WARNING: • Store the battery in a place where children cannot reach. Installi
ページ8に含まれる内容の要旨
1000 D- BASIC OPERATIONS 200W 3 1 2 Turning on the power 3 Adjust the volume. To increase the volume. 1 Turn on the power. To decrease the volume. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. Volume level appears 4 Adjust the sound as you want. (See pages 18 – 21.) To operate the tuner (FM or AM), see pages 9 – 13. To drop the volume in a moment To play a CD
ページ9に含まれる内容の要旨
Changing the display pattern Canceling the display demonstration You can change the display pattern. The number of the selectable display patterns When shipped from the factory, display varies according to the playback sources. demonstration (MovieDemo) has been activated, However, the unit basically provides three main and starts automatically when no operations are display patterns for each source, and once one of done for about 20 seconds. these three patterns is selected, the same • It is re
ページ10に含まれる内容の要旨
1000 D- RADIO OPERATIONS 200W Listening to the radio 2 Start searching a station. You can use either automatic searching or manual Press ¢ to searching to tune in to a particular station. search stations of higher frequencies. Searching a station automatically: Auto search Press 4 to search stations of 1 Select the band (FM1 – 3, AM). lower frequencies. FM1 FM2 FM3 AM Ex.: When the band is FM When a station is received, searching stops. To stop searching before a station is received, Last rece
ページ11に含まれる内容の要旨
Searching a station manually: When an FM stereo broadcast is hard to Manual search receive: 1 Press MODE (M) to enter the functions mode while listening to 1 Select the band (FM1 – 3, AM). an FM stereo broadcast. “Mode” appears on the display. 2 Press MO (monaural), while “Mode” is still on the display, so FM1 FM2 FM3 AM that the MO indicator is highlighted on the display. Note: Each time you press MO, “Mono This receiver has three FM bands (FM1, FM2, On” and “Mono Off” alternately FM3). You can
ページ12に含まれる内容の要旨
Manual preset Storing stations in memory You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. You can use one of the following two methods to store broadcasting stations in memory. Ex.: Storing an FM station of 88.3 MHz into the • Automatic preset of FM stations: SSM (Strong- preset number 1 of the FM1 band. station Sequential Memory) • Manual preset of both FM and AM stations 1 Select the band (FM1 – 3, AM) you want to store stations into (in this FM station automatic p
ページ13に含まれる内容の要旨
Tuning in to a preset station 3 Press and hold the number button (in this example, 1) for more than 2 You can easily tune in to a preset station. seconds. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on page 11. Selecting a preset station directly 1 Select the band (FM1 – 3, AM). The display pattern automatically changes to the small animation display and the preset number flashes (then the previous display pattern resumes). FM1 F
ページ14に含まれる内容の要旨
Selecting a preset station using the Changing the display information preset station list By pressing DISP (D), you can change the If you forget what stations are stored in what information shown on the display. preset numbers, you can check the preset station Each time you press the button, the list, then select your desired station on the list. display patterns change as follows: 1 Select the band (FM1 – 3, AM). • When receiving an AM or FM station Large animation display FM1 FM2 FM3 AM 2 Pres
ページ15に含まれる内容の要旨
1000 D- CD OPERATIONS 200W Notes: Playing a CD • When a disc is already in the loading slot, selecting “CD” as the source starts CD play. 1 Open the control panel. • When a disc is inserted upside down, the disc automatically ejects (if the control panel is open). If the control panel is closed, “Please Eject” appears. • If you change the source, CD play also stops (without ejecting the disc). Next time you select “CD” as the source, CD play starts from where playback has been stopped 2 Insert a
ページ16に含まれる内容の要旨
To go to a particular track directly Locating a track or a particular portion on a CD To fast-forward or reverse the track Press and hold ¢ , while playing a disc, to Press the number button corresponding to the fast-forward the track. track number to start its playback. • To select a track number from 1 – 6: Press 1 (7) – 6 (12) briefly. Press and hold 4 , • To select a track number from 7 – 12: while playing a disc, to Press and hold 1 (7) – 6 (12) for more than 1 reverse the track. second
ページ17に含まれる内容の要旨
To play back tracks repeatedly (Repeat Play) To play back only intros (Intro Scan) You can play back the first 15 seconds of each You can play back the current track repeatedly. track sequentially. 1 Press MODE (M) to enter the 1 Press MODE (M) to enter the functions mode while playing a functions mode while playing a disc. disc. “Mode” appears on the display. “Mode” appears on the display. 2 Press RPT (repeat), while 2 Press INT (intro), while “Mode” is “Mode” is still on the display, so still
ページ18に含まれる内容の要旨
Changing the display information By pressing DISP (D), you can change the information shown on the display. Each time you press the button, the display patterns change as follows: Large animation display Small animation display 1 iEQ mode Clock time Small animation display 2 (see page 19) Small animation display 3 Clock time display Small animation display 4 Notes: • When the disc title/performer is shown, the DISC indicator lights up. When the track title is shown, the TR indicator lights up. •
ページ19に含まれる内容の要旨
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level. You can adjust the sound characteristics to your To increase the level. preference. 1 Select the item you want to adjust. To decrease the level. Each time you press the button, the adjustable items change as follows: While adjusting fader and balance —Fad, Bal: You can make these two adjustments at the Fad Bal S.Bass same time, by referring to the indication on (Fader) (Balance) (Super Bass) the display. Sub Out Vol Adj (Subwoofer Output)
ページ20に含まれる内容の要旨
Selecting preset sound modes Storing your own sound (iEQ: i-equalizer) adjustments You can adjust the sound modes to your preference You can select a preset sound mode suitable to the music genre. and store your own adjustments in memory • There is a time limit in doing the following (User 1, User 2 and User 3). • There is a time limit in doing the following procedure. If the setting is canceled before you procedure. If the setting is canceled before you finish, start from step 1 again. finish,
