ENGLISH ESPAÑOL FRANÇAIS KD-R528/KD-A525/ KD-R520/KD-R428/KD-R420 CD RECEIVER / RECEPTOR CON CD / Having TROUBLE with operation? RÉCEPTEUR CD Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! KD-R528/KD-A525/KD-R520: • “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to For canceling the display demonstration, see page 4. / Para cancelar la demostración
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
ページ3に含まれる内容の要旨
How to attach/detach the control CONTENTS panel 3 How to attach/detach the control panel 3 How to reset your unit 3 How to forcibly eject a disc 3 Maintenance 4 Canceling the display demonstration How to reset your unit 4 Setting the clock Your preset adjustments will 5 Preparing the remote controller also be erased. 5 About discs 6 Basic operations 7 Listening to the radio 8 Listening to a disc How to forcibly eject a disc 9 Connecting the other external components [Hold] 9 Listening to
ページ4に含まれる内容の要旨
Canceling the display demonstration Display demonstration will be activated automatically if no operation is done for about 20 seconds. 1 Turn on the power. 4 Select . 5 2 [Hold] (Initial setting) 6 Finish the procedure. 3 (Initial setting) Setting the clock 1 Turn on the power. 2 [Hold] (Initial setting) 3 Select . 4 Select . 5 Adjust the hour. (Initial setting) 6 Adjust the minute. 7 Finish the procedure. 4 ENGLISH EN02-19_KD-R528[J]f.indd 4 EN02-19
ページ5に含まれる内容の要旨
Preparing the remote controller When you use the remote controller for the first Caution: time, pull out the insulation sheet. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Battery shall not be exposed to excessive heat Insulation sheet such as sunshine, fire, or the like. For USA-California Only: This product contains a CR Coin Cell Lithium Warning (to prevent accidents and Battery which contains Perchlorate Material— damage): s
ページ6に含まれる内容の要旨
Basic operations Loading slot Display window Control dial Ejects the disc Remote sensor Front auxiliary • DO NOT expose to input jack bright sunlight. Detaches the panel USB (Universal Serial Bus) input terminal When you press or hold the following button(s)... Remote Main unit General operation controller • Turns on. — • Turns off [Hold]. Selects the sources (FM, CD, USB or USB-IPOD, F-AUX, BT AUDIO or / SOURCE R-AUX or BT PHONE, AM). SOURCE • “CD” or “USB” is selectable only when a disc
ページ7に含まれる内容の要旨
Listening to the radio • [Press] Searches for stations automatically. ~ Ÿ • [Hold] Searches for stations manually. “M” flashes, then press the button ] “FM” or “AM” repeatedly. “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Improving the FM reception Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 1 [Hold] stations for AM. 1 2 ] Tune in to a station you want to ] ] ] preset. Reception improves, but stereo
ページ8に含まれる内容の要旨
Listening to a disc Playback starts automatically. All tracks will be played repeatedly until you change the source or eject the disc. Stopping playback and ejecting Selecting a track/folder from the list the disc If the ejected disc is not removed within 15 seconds, it is automatically inserted into the loading slot. • If the MP3/WMA disc contains many tracks, you can fast search (±10, ±100) through the Basic operations disc by turning the control dial quickly. • To return to the previ
ページ9に含まれる内容の要旨
Connecting the other external components You can connect an external component to the auxiliary input jack on the control panel (F-AUX) and/or on the rear side of the unit (R-AUX). Summary of using the external components through the auxiliary input jacks: Preparation Connecting Auxiliary Source External component Menu setting Sub- cable/device input jack Setting name item item (not supplied) Portable audio Front SRC SELECT F-AUX ON F-AUX See below. player Rear SRC SELECT R-AUX ON R-AUX Bluet
ページ10に含まれる内容の要旨
Listening to a USB device You can operate the USB device in the same way you operate the files on a disc. (page 8) • This unit can play MP3/WMA files stored in a USB mass storage class device (such as a USB memory, Digital Audio Player, etc.). ~ Ÿ USB input terminal ] Turn on the power. USB cable (not supplied) All tracks will be played repeatedly until you change the source or disconnect the USB device. Cautions: • Make sure all important data has been backed • Depending on the shape of the U
ページ11に含まれる内容の要旨
Listening to an iPod/iPhone Available for KD-R528/KD-A525/KD-R520 ~ Ÿ USB input terminal ] Turn on the power. USB 2.0 cable (accessory of the iPod/iPhone) Apple iPod/iPhone All tracks will be played repeatedly until you change the source or disconnect the iPod/ iPhone. Cautions: Selecting a track from the menu • Avoid using the iPod/iPhone if it might hinder Not applicable under . your safety driving. 1 • Make sure all important data has been backed up to avoid losing the
ページ12に含まれる内容の要旨
Changing the display information Selecting the playback modes • You can use only one of the following playback modes at a time. • Not applicable under . Album name/performer = Track title = Current track number with the elapsed playing 1 [Hold] time = Current track number with the clock time = (back to the beginning) 2 Additional information • Made for ] “REPEAT” j “RANDOM” iPod touch (1st, 2nd, and 3rd generation) 3 iPod classic iPod with video * iPod nano (1st
ページ13に含まれる内容の要旨
Storing your own sound mode 3 You can store your own adjustments in memory. Adjust the sound elements (see table 1 below) of the selected tone. [Hold] Repeat steps 2 and 3 to adjust other 4 tones. 2 The adjustments made is automatically stored and changed to “USER.” ] ] Frequency / Level / Q [Initial: Underlined] BASS 60/ 80/ 100/ 200 Hz –06 to +06 [ 00 ] Q1.0/ 1.25/ 1.5/ 2.0 MIDDLE 0.5/ 1.0/ 1.5/ 2.5 kHz –06 to +06 [ 00 ] Q0.75/ 1.0/ 1.25 TREBLE 10.0/ 12
ページ14に含まれる内容の要旨
Menu item Selectable setting, [Initial: Underlined] DAY BUTTON ZONE You can create your own day and night colors for
ページ15に含まれる内容の要旨
Menu item Selectable setting, [Initial: Underlined] 10 SUB.W LPF * LOW 55Hz / LOW 85Hz / LOW 120Hz : Frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. 10 SUB.W LEVEL * 00 — 08 [ 04 ] : Adjusts the subwoofer output level. HPF ON : Activates the High Pass Filter. The unit selects the cutoff frequency to the rear speakers. / OFF : Deactivates (all signals are sent to the rear speakers). BEEP ON / OFF : Activates or deactivates the keypress tone. 11 TEL MUTING * ON : Mutes the s
ページ16に含まれる内容の要旨
Troubleshooting Symptom Remedy/Cause Sound cannot be heard from the Adjust the volume to the optimum level. / Make sure the unit is not speakers. muted/paused. (page 6) / Check the cords and connections. “MISWIRING CHK WIRING THEN RESET Check to be sure the terminals of the speaker leads are covered with UNIT” appears on the display and no insulating tape properly, then reset the unit. (page 3) operations can be done. If the message does not disappear, consult your JVC car audio dealer or a c
ページ17に含まれる内容の要旨
Symptom Remedy/Cause “NO FILE” appears on the display. Check whether the device contains playable files. Noise is generated. Skip to another file. “NOT SUPPORT” appears and track skips. Check whether the track is a playable file format. Tracks/folders are not played back in the The playback order is determined by the file name. Folders with order you have intended. numbers on the initial of their names are sorted in numerical order. However, folders with no numbers on the initial of their name
ページ18に含まれる内容の要旨
Using Bluetooth ® devices For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (not supplied) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (page 9) • For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device. • Operations may be different according to the connected device. Preparation 1 Register (pair) a Bluetooth device with KS-BTA100. Refer to the instructions manual supplied with KS-BT
ページ19に含まれる内容の要旨
Specifications AUDIO AMPLIFIER SECTION CD PLAYER SECTION Type : Compact disc player Signal Detection System : Non-contact optical pickup (semiconductor laser) Number of Channels : 2 channels (stereo) Power Output : 20 W RMS × 4 Channels at 4 Ω Frequency Response : 5 Hz to 20 000 Hz and ≤ 1% THD+N Signal-to-Noise Ratio : 98 dB Signal-to-Noise Ratio : 80 dBA (reference: 1 W Wow and Flutter : Less than measurable limit into 4 Ω) MP3 Decoding Format (MPEG1/2 Audio Load Impedance : 4 Ω (4 Ω to 8
ページ20に含まれる内容の要旨
Muchas gracias por la compra de un producto JVC. Como primer paso, por favor lea detenidamente este manual para comprender a fondo todas las instrucciones y obtener un máximo disfrute de esta unidad. IMPORTANTE (EE.UU.) Este equipo se ha sometido a todo tipo de pruebas y cumple con las normas establecidas para dispositivos de Clase B, de conformidad con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). Estas reglas están diseñadas para asegurar una protección razonable
