ページ1に含まれる内容の要旨
SSM
CD RECEIVER KD-LX300
RECEPTOR CON CD KD-LX300
RECEPTEUR CD KD-LX300
SCM MONO LOCAL INT RPT RND KD-LX300
SEL DISP MODE 78 9 10 11 12 SOURCE BBE BAND OFF
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
INSTRUCTIONS
Retain this in
ページ2に含まれる内容の要旨
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
ページ3に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS OTHER MAIN FUNCTIONS ............... 17 LOCATION OF THE BUTTONS ............ 4 Setting the clock ...................................... 17 Control panel ........................................... 4 Remote controller .................................... 5 Changing the general settings (PSM) .....
ページ4に含まれる内容の要旨
LOCATION OF THE BUTTONS Control panel CD loading slot Display panel 2 1 3 u
4 5 6 7 8 9 p q w e r t y *The control panel slides out when you press ON/CLOSE. *When you press OFF/0, the display panel moves down and the CD loading slot appears. 1 Control dial 7 SCM (sound control memory) button 8 MONO button 2 ¢ / 4 button 9 LOCAL button • ¢ / 4 also functions as ON or CLOSE button. p INT (intro) button 3 Remote sensor q RPT (repeat) button 4 SEL (select) button w RND (random) button 5 DISP (di
ページ5に含まれる内容の要旨
3 • Functions as the PRESET button while Remote controller listening to the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. 5 • Functions as the DISC – button while listening 6 1 to the CD changer. Each time you press the button, the disc 2 number decreases, and the selected disc 7 starts playing. 3 4 Functions the same as the control dial on the main unit. NOTE: This button does not function for the 4 preferred setting mode adju
ページ6に含まれる内容の要旨
3. Return the battery holder. Preparing the remote controller Insert again the battery holder pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote (back side) sensor on the main unit. Make sure there is no obstacle in between. Remote sensor WARNING: KD-LX300 SOURCE BBE BAND OFF • Store the batteries in a place which children cannot reach. If a child accidentally swallows the batteries, • Do not expose the remote sensor
ページ7に含まれる内容の要旨
SSM BASIC OPERATIONS KD-LX300 SCM MONO LOCAL INT RPT RND KD-LX300 78 9 11 12 SOURCE BBE BAND OFF SEL DISP MODE 10 SOURCE BBE BAND OFF 1 3 2 3 Adjust the volume. 1 Turn on the power. The display illuminates and To increase the volume. the control panel and control dial come out. To decrease the volume. 2 Select the source. Each time you press the button, the source changes as follows: Volume level meter = Tuner (FM or AM) = CD* = CD changer** = External component 4 Adjust the sound as you want (s
ページ8に含まれる内容の要旨
SSM RADIO BASIC OPERATIONS SCM MONO LOCAL INT RPT RND KD-LX300 SEL MODE 78 9 10 11 12 SOURCE OFF DISP BBE BAND To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune into a particular station. To tune in FM stations only with strong signals 1 Press MODE. Searching a station automatically: “MODE” appears on the display, and the number Auto search buttons can wor
ページ9に含まれる内容の要旨
2 Press and hold ¢ or 4 until Storing stations in memory “M” (manual) starts flashing on the You can use one of the following two methods to display. store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM 3 Tune into a station you want while “M” You can preset 6 local FM stations in each FM band is flashing. (FM1, FM2 and FM3). Press ¢ to tune into stations of
ページ10に含まれる内容の要旨
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band (FM1, numbers. FM2, FM3 and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the Notes: preset number 1 of the FM1 band • A previously preset station is erased when a new station is stored in the same preset number. 1 Select the band (FM1). • Preset stations are erased when the power supply to the 1 Press SOURCE to memory circuit is interrupted (for example,
ページ11に含まれる内容の要旨
SSM CD OPERATIONS SCM MONO LOCAL INT RPT RND KD-LX300 9 SEL DISP MODE 78 10 11 12 SOURCE BBE BAND OFF Notes: Playing a CD • When a CD is in the loading slot, selecting “CD” as the source by pressing SOURCE starts CD play. 1 Open the loading slot. • When a CD is inserted upside down, the CD automatically ejects. (“DISC EJECT” appears on the display.) • When you play a CD Text, the disc title and performer appear on the display. Then the current track title appears on the display, followed by the
ページ12に含まれる内容の要旨
Locating a track or a Selecting CD playback modes particular portion on a CD To play back tracks at random (Random Play) To fast-forward or reverse the track You can play back all tracks on the CD at Press and hold ¢, while random. playing a CD, to fast-forward the track. 1 Press MODE while playing a CD. “MODE” appears on the lower part of the Press and hold4 , while display, and the number buttons can work as playing a CD, to reverse the different function buttons. track. 2 Press RND (Random)
ページ13に含まれる内容の要旨
Playing a CD Text To play back only intros (Intro Scan) You can play back the first 15 seconds of each In a CD Text, some information about the disc (its track sequentially. disc title, performer and track title) is recorded. You can show these disc information on the 1 Press MODE while playing a CD. display. “MODE” appears on the lower part of the display, and the number buttons can work as Select text display mode while playing a different function buttons. CD Text. 2 Press INT (Intro), while
ページ14に含まれる内容の要旨
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level. To increase the level. You can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. To decrease the level. Each time you press the button, the adjustable items change as follows: BASS TREBLE FADER Equalization pattern changes as you adjust VOLUME WOOFER BALANCE the bass or treble. Note: Normally the control dial works for volume Indication To do: Range adjustment. So you do not have to select “VOLUME”
ページ15に含まれる内容の要旨
II Turning on/off the BBE Using the sound control function memory II The BBE * function restores the brilliance and clarity You can select and store a preset sound of the original live sound in recording, broadcasts, adjustment suitable for each playback source. etc. (Advanced SCM) When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing high- Selecting and storing the sound frequency sounds to take longer to reach the ear modes II than low frequency sounds. The
ページ16に含まれる内容の要旨
Indication For: Preset values 1 Press MODE. II Bass Treble BBE The number buttons can work as SCM BEAT Rock or disco +02 00 2 different function buttons. music SCM SOFT Quiet +01 –03 OFF background music 2 Select the sound mode you want. For details, see page 15. SCM POP Light music +04 +01 OFF SCM OFF (Flat sound) 00 00 2 Recalling the sound modes 3 1 Select the item you want to adjust When “SCM LINK” is set to “SCM LINK (BASS or TREBLE). 2 Adjust the selected item. ON,” select the source. 1 2
ページ17に含まれる内容の要旨
OTHER MAIN FUNCTIONS Changing the general settings Setting the clock (PSM) 1 Press and hold SEL (select) for You can change the items listed on the next page more than 2 seconds so that one of by using the PSM (Preferred Setting Mode) control. the PSM items appears on the display. (See page 18.) Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 18.) 2 Set the hour. 1Select “CLOCK HOUR” if not shown on the display.
ページ18に含まれる内容の要旨
Preferred Setting Mode (PSM) items 3 1 2 Factory-preset See Set. settings page Select. Hold. Counter- clockwise Clockwise Back Advance CLOCK HOUR Hour adjustment 1:00 17 Back Advance CLOCK MINUTE Minute adjustment SCM LINK Sound control 19 SCM LINK OFF SCM LINK ON SCM LINK ON memory linkage CLK DISP OFF CLK DISP ON CLK DISP ON 19 CLOCK DISP Clock display LEVEL METER Level display 4 types (see page 19) NORMAL 19 DIMMER MODE Dimmer mode DIMMER AUTO DIMMER OFF DIMMER AUTO 19 DIMMER ON CRUISE 1 CR
ページ19に含まれる内容の要旨
To cancel Advanced SCM — SCM LINK To select the dimmer mode — DIMMER MODE You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes When you turn on the car headlights, the display and the playback sources automatically dims (Auto Dimmer). When shipped from the factory, a different sound When shipped from the factory, Auto Dimmer mode can be stored in memory for each source mode is activated. so that you can change the sound modes simply • DIMMER AUTO: Activates Auto Dim
ページ20に含まれる内容の要旨
To select the scroll mode — SCROLL MODE To change the AM/FM channel intervals — AREA CHANGE You can select the scroll mode for the disc information if it consists of more than 12 When this unit is shipped from the factory, the characters. When shipped from the factory, Auto channel intervals are set to 10 kHz for AM and Scroll mode is set to “SCROLL ONCE.” 200 kHz for FM (AREA US settings). • SCROLL ONCE: Scrolls only once. You will have to change the channel intervals • SCROLL AUTO: Repeats the
