ページ1に含まれる内容の要旨
CD RECEIVER KD-S640
RECEPTOR CON CD KD-S640
RECEPTEUR CD KD-S640
KD-S640
/I/ATT
MO
40WX4 RND
SOUND
RPT
LOUD
SEL SSM
SCAN
DISP
DIRECT TRACK ACCESS
78 9 1011 12
12 3 4 5 6 AM FM CD
For installation and connections, refer to the separate manual.
COMPACT
Para la instalación y las conexiones, refiérase al manual separado.
DIGITAL AUDIO
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bo
ページ2に含まれる内容の要旨
INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee
ページ3に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERATIONS.................................................... 4 RADIO OPERATIONS................................................... 5 Listening to the radio ..................................................................... 5 Storing stations in memory ..................................
ページ4に含まれる内容の要旨
BASIC OPERATIONS 1 Note: When you use this unit for the first time, set the built-in clock correctly, see page 16. 3 2 1 Turn on the power. / I /ATT Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 A M F M C D Select the source. To operate the tuner, see pages 5 – 9. To operate the CD player, see pages 10 – 12. 3 Adjust the volume. Volume level indicator Volume level appears.
ページ5に含まれる内容の要旨
RADIO OPERATIONS Listening to the radio 2 1 1 Select the band (FM1, FM2, FM3 or AM). You can select any one of FM1, FM2, and FM3 to listen to an FM station. A M F M FM1 FM2 AM FM3 2 Start searching a station. To search stations of higher When a station is received, searching stops. SSM frequencies. To search stations of lower frequencies. To stop searching before a station is received, press the same button you have pressed for searching. To tune in a particular frequency without searching: 1
ページ6に含まれる内容の要旨
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3). 2 1 FM1 FM2 FM3 1 F M Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. 2 Press and hold the both buttons for more than 2 seconds. SS
ページ7に含まれる内容の要旨
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 2 3 1 1 Select the FM1 band. F M 2 Tune into a station of 88.3 MHz. SSM See page 5 to tune into a station. 12 3 Press and hold the button for more than 2 seconds. Preset number “1” starts flashing for a while. 4 Repeat the above procedure to store other stations into other preset numbers. Notes: • A previously preset stat
ページ8に含まれる内容の要旨
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. 1 2 1 Select the band (FM1, FM2, FM3 or AM) you want. A M F M FM1 FM2 AM FM3 2 12 3 4 5 6 Select the number (1 – 6) for the preset station you want. 8
ページ9に含まれる内容の要旨
Other convenient tuner functions ¢ MO SEL 4 RND +/– SCAN Scanning broadcast stations When you press SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcasted. If you want to listen to that program, press the same button again to stop scanning. Selecting FM reception sound When an FM stereo broadcast is hard to receive:
ページ10に含まれる内容の要旨
CD OPERATIONS Playing a CD 1 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. • When a CD is inserted upside down, “EJECT” appears on the display and the CD automatically ejects. Total playing time of Total track number Elapsed playing Current track the inserted disc of the inserted disc time Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically. CAUTION on Volu
ページ11に含まれる内容の要旨
Locating a track or a particular portion on a CD ¢ Number buttons 4 To fast forward or reverse the track Press and hold ¢ , while playing a CD, to fast forward the track. SSM Press and hold 4 , while playing a CD, to reverse the track. To go to the next track or the previous track Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next track is located and played back. SSM Press 4 briefl
ページ12に含まれる内容の要旨
Selecting CD playback modes MO RND RPT To play back tracks at random (Random Play) You can play back all tracks on the CD at random. MO Each time you press MO RND (Mono/Random) while playing a CD, CD RND random play mode turns on and off alternatively. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly. Each time you press RPT (Repea
ページ13に含まれる内容の要旨
SOUND ADJUSTMENTS Turning on/off the loudness function The human ear is less sensitive to low and high frequencies at low volumes. The loudness function can boost these frequencies to produce well-balanced sound at low volume level. Each time you press LOUD, the loudness function turns on and off alternatively. LOUD Selecting preset sound modes You can select a preset sound adjustment suitable to the music genre: Each time you press SOUND, the sound mode changes as follows. SOUND Indication For:
ページ14に含まれる内容の要旨
Adjusting the sound You can adjust the treble/bass sound and the speaker balance. 12 1 SEL Select the item you want to adjust. Indication To do: Range BAS Adjust the bass –6 (min.) — +6 (max.) (bass) TRE Adjust the treble –6 (min.) — +6 (max.) (treble) FAD Adjust the front and rear speaker R6 (rear only) — F6 (front only) (Fader)* balance BAL Adjust the left and right speaker L6 (left only) — R6 (right only) (Balance) balance VOL Adjust the volume 00 (min.) — 50 (max.) (Volume) Note: * If you
ページ15に含まれる内容の要旨
Storing your own sound adjustments You can adjust the sound modes (BEAT, SOFT, POP: see page 13) as you like and store your own adjustments in memory. 23 1, 4 2 1 SOUND Call up the sound mode you want to adjust. See page 13 for details. Within 5 seconds 2 SEL To adjust the bass or treble sound level Select “BAS” or “TRE.” To turn on or off the loudness function LOUD Each time you press LOUD, the loudness function turns on and off alternatively. (= go to step 4) Within 5 seconds 3 Adjust the bass
ページ16に含まれる内容の要旨
OTHER MAIN FUNCTIONS Setting the clock 2,3 1 4 1 Press and hold the button for more than 2 SEL seconds. “CLOCK H,” “CLOCK M” or “AREA” appears on the display. 2 1. Set the hour. SSM 1. Select “CLOCK H” if not shown on the 2. display. 2. Adjust the hour. 3 1. Set the minute. SSM 1. Select “CLOCK M.” 2. 2. Adjust the minute. 4 DISP Start the clock. To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
ページ17に含まれる内容の要旨
Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. How to detach the control How to attach the control panel panel Before detaching the control panel, be sure to turn off the power. 1 Insert the left side of the 1 control panel into the groove Unlock the control panel. on the panel holder. 2 2 Lift and pull the control pa
ページ18に含まれる内容の要旨
MAINTENANCE Handling CDs COMPACT This unit has been designed only to reproduce the CDs bearing the mark. DIGITAL AUDIO Other discs cannot be played back. How to handle CDs Center holder When removing a CD from its case, press down the center holder of the case and lift the CD out, holding it by the edges. • Always hold the CD by the edges. Do not touch its recording surface. When storing a CD into its case, gently insert the CD around the center holder (with the printed surface facing
ページ19に含まれる内容の要旨
TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • CD cannot be played back. CD is inserted upside down. Insert the CD correctly. • CD sound is sometimes You are driving on rough Stop CD play while driving interrupted. roads. rough roads. CD is scratched. Change the CD. Connections are incorrect. Check the cords and connections. • “NO DISC” appears on the No CD is in the loading slot. Insert a C
ページ20に含まれる内容の要旨
SPECIFICATIONS [AM Tuner] AUDIO AMPLIFIER SECTION Sensitivity: 20 μV Maximum Power Output: Selectivity: 35 dB Front: 40 watts per channel Rear: 40 watts per channel CD PLAYER SECTION Continuous Power Output (RMS): Type: Compact disc player Front: 15 watts per channel into 4 Ω, 40 Signal Detection System: Non-contact optical to 20,000 Hz at no more than 0.8% pickup (semiconductor laser) total harmonic distortion. Number of channels: 2 channels (stereo) Rear: 15 watts per channel into 4 Ω, 40 Freq
