ページ1に含まれる内容の要旨
CD RECEIVER KD-APD49/KD-PDR40
RECEPTOR CON CD KD-APD49/KD-PDR40
RÉCEPTEUR CD KD-APD49/KD-PDR40
For canceling the display demonstration, see page 6.
Para cancelar la demostración en pantalla, consulte la página 6.
Pour annuler la démonstration des affichages, référez-vous à la page 6.
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter below the Model
Pour l’installation et les raccordement
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
ページ3に含まれる内容の要旨
How to reset your unit CONTENTS Control panel — KD-APD49/KD-PDR40 ... 4 Remote controller — RM-RK50 ........... 5 Getting started ................................ 6 Basic operations ................................................... 6 • Your preset adjustments will also be erased. Radio operations ............................. 7 Disc operations ................................ 8 Playing a disc in the unit ..................................... 8 How to forcibly eject a disc iPod operations ..
ページ4に含まれる内容の要旨
Control panel — KD-APD49 / KD-PDR40 Parts identification Display window 1 5 (up) / ∞ (down) buttons o Number buttons 2 0 (eject) button ; RPT (repeat) button 3 (standby/on attenuator) button a RND (random) button 4 Control dial s AUX (auxiliary) input jack 5 Remote sensor d Source display / Track number / Folder number / DO NOT expose the remote sensor to strong light Time countdown indicator (direct sunlight or artificial lighting). f Tr (track) indicator 6 BAND button g DISC indicator 7 Loa
ページ5に含まれる内容の要旨
Main elements and features Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) 1 (standby/on/attenuator) button • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. For USA-California Only: 2 5 U (up) / D (down) ∞ buttons This product contains a CR Coin Cell Lithium Battery • Changes the FM/AM bands with 5 U. which contains Perchlorate Material—special • Changes the preset stations with D ∞
ページ6に含まれる内容の要旨
To drop the volume in a Getting started moment (ATT) To restore the sound, press Basic operations the button again. ~ Turn on the power. To turn off the power Ÿ Basic settings • See also “General settings — PSM” on pages 14 and 15. 1 1 * You cannot select “CD” as the playback source 2 if there is no disc in the unit. 2 * “NO IPOD” appears if an iPod is not connected. 1 Canceling the display demonstrations ! For FM/AM tuner Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select
ページ7に含まれる内容の要旨
When an FM stereo broadcast is hard to Radio operations receive ~ Lights up when monaural mode is activated. Ÿ Reception improves, but the stereo effect will be lost. Lights up when receiving an FM stereo broadcast with sufficient signal strength. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. ! Start searching for a station. Storing stations in memory You can preset six stations for each band. When a station is received, searchin
ページ8に含まれる内容の要旨
Manual presetting Disc operations Ex.: Storing the FM station of 92.50MHz into preset number 4 of the FM1 band. Playing a disc in the unit 1 All tracks will be played repeatedly until you change the source or eject the disc. 2 3 To stop play and eject the disc Preset number flashes for a while. • Press SRC to listen to another playback source. Listening to a preset station [Hold] To fast-forward or reverse the track 1 [Press] To go to the next or previous 2 Select the preset station (
ページ9に含まれる内容の要旨
• To use direct folder access on MP3/WMA discs, it Changing the display information is required that folders are assigned with 2-digit numbers at the beginning of their folder names— 01, 02, 03, and so on. To select a particular track in a folder While playing an audio CD or CD Text (for MP3 or WMA discs): 1 A = B = Disc title/performer * = Track 1 title * [ ] = (back to the beginning) While playing an MP3 or a WMA track Other main functions • When “TAG DISPLAY” is set to “TAG ON” S
ページ10に含まれる内容の要旨
Selecting the playback modes iPod operations You can use only one of the following playback modes You can play songs in an Apple iPod by connecting it at a time. with the supplied direct connection cable for iPod. You can control playback from the unit or from your 1 iPod. • Disconnecting the iPod will stop playback. Press SRC to listen to another playback source. 2 Select your desired playback mode. Caution: 7 Repeat play • Avoid using the iPod if it might hinder your safety while driving
ページ11に含まれる内容の要旨
! Adjust the sound as you want. (See Selecting a track from the menu pages 12 and 13.) 1 Enter the main menu. To control playback from your iPod or “IPOD MODE” appears on the display. Now the 5/∞/4 /¢ /number • Press and hold this button again to control playback buttons work as the menu selecting buttons. from the unit. “HEAD MODE” appears on the display. 2 Select the desired menu. Playback control from the unit [Press] Go to the next or previous PLAYLIST Ô ARTIST Ô ALBUM Ô SONG track Ô
ページ12に含まれる内容の要旨
To exit from menu selecting mode To check other information while listening to an iPod or * The menu selecting mode will be canceled: Current track number with the elapsed – If no operations are performed for about playing time = Current track number with 10 seconds. the clock time = Track title * = Album name/ – When you confirm the selection of a track. performer * = (back to the beginning) – Pressing some other buttons such as DISP, SEL, MODE, or EQ. * When “TAG DISPLAY” is set to “T
ページ13に含まれる内容の要旨
3 Select a sound characteristic. Indication, [Range] 4 LOUD * (loudness), [LOUD ON or LOUD OFF] Boost low and high frequencies to produce a well-balanced sound at a low volume level. 4 Adjust the sound elements of the selected 1 SUBWOOFER * , [00 to 08, initial: 04] sound characteristic. Adjust the subwoofer output level. 1 Adjust the frequency. VOL ADJ (volume adjust), [–05 to +05, initial: 00] Adjust the volume level of each source (except FM), in relation to the FM volume level. The volume
ページ14に含まれる内容の要旨
General settings — PSM You can change PSM (Preferred Setting Mode) items 3 Adjust the PSM item selected. listed in the table below and on page 15. 1 2 Select a PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. Indications Item Setting, [reference page] ( : Initial) DEMO • DEMO ON : The display demonstration will be activated automatically if no Display operation is done for about 20 seconds, [6]. demonstration • DEMO OFF : Cancels. 1 CLOCK
ページ15に含まれる内容の要旨
Indications Item Setting, [reference page] ( : Initial) 2 AUDIOBOOKS * • NORMAL : You can select the playback speed of the “Audiobook” sound file in Speed control of • FASTER your iPod. “Audiobook” • SLOWER 3 SCROLL * • ONCE : Scrolls the displayed information once. Scroll • AUTO : Repeats scrolling (at 5-second intervals). • OFF : Cancels. • Pressing DISP for more than one second can scroll the display regardless of the setting. L/O MODE • REAR : Select if the REAR LINE OUT termina
ページ16に含まれる内容の要旨
Other external component Title assignment operations You can assign names to 30 station frequencies (FM and AM) and up to 8 characters for each station name. You can connect an external component to the AUX (auxiliary) input jack on the control panel. 1 Select FM/AM. 2 Show the title entry screen. Portable audio player, etc. 3.5 mm stereo mini plug (not supplied) ~ 3 Assign a title. 1 Select a character. Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. 2
ページ17に含まれる内容の要旨
To play new discs Maintenance New discs may have some rough spots around the inner and outer edges. If How to clean the connectors such a disc is used, this unit may reject Frequent detachment will deteriorate the connectors. the disc. To minimize this possibility, periodically wipe the To remove these rough spots, rub the edges with a connectors with a cotton swab or cloth moistened with pencil or ball-point pen, etc. alcohol, being careful not to damage the connectors. Do not use the f
ページ18に含まれる内容の要旨
General Playing a CD-R or CD-RW • If you change the source while listening to a disc or • Use only “finalized” CD-Rs or CD-RWs. an iPod, playback stops. • This unit can only play back files of the same type as Next time you select “CD” or “IPOD” as the playback those which are detected first if a disc includes both source, playback will start from where it had been audio CD (CD-DA) files and MP3/WMA files. stopped/paused previously. • This unit can play back multi-session discs; however, • A
ページ19に含まれる内容の要旨
– Disc format: ISO 9660 Level 1/Level 2, Romeo, • Update your iPod to the latest software version Joliet, Windows long file name before using it with this unit. • The maximum number of characters for file/folder • When you turn on this unit, the iPod is charged names vary depending on the disc format used through this unit. (includes 4 extension characters—<.mp3> or • While connecting an iPod with Video: – No video shows on the iPod’s display or the <.wma>). – ISO 9660 Level 1: up to 12 chara
ページ20に含まれる内容の要旨
Preset value setting for each sound mode Preset value Sound mode BASS (bass) MID (mid-range) TRE (treble) LOUD (loudness) Freq. Level Q Freq. Level Q Freq. Level Q USER 60 Hz 00 Q1.0 1.0 kHz 00 Q1.25 7.5 kHz 00 Q1.25 ROCK 100 Hz +03 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +02 Q1.25 CLASSIC 80 Hz +01 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +03 Q1.25 OFF POP 100 Hz +02 Q1.0 1.0 kHz +01 Q1.25 10.0 kHz +02 Q1.25 HIP HOP 60 Hz +04 Q1.0 1.0 kHz –02 Q1.0 10.0 kHz +01 Q1.25 JAZZ 80 Hz +03 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +
