ページ1に含まれる内容の要旨
6
4
S
S
CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-LH6R/KS-LH4R
KS-LH6R
SOUND
U
R SOURCE F
D
VOL VOL
TAPE
KS-LH4R
TAPE
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende
handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANU
ページ2に含まれる内容の要旨
How to reset your unit After detaching the control panel, press the reset button on the panel holder using a ball-point pen or similar tool. This will reset the built-in microcomputer. Note: • Your preset adjustments – such as preset channels or sound adjustments – will also be erased. How to use the MODE (M): If you press MODE (M), the unit goes into functions mode and the number buttons work as different function buttons. Ex.: When you press button 5 to enter the RPT function mode. To use thes
ページ3に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS .................. 22 How to use the MODE (M) ....................... 2 Adjusting the sound ................................. 22 Selecting preset sound modes LOCATION OF THE BUTTONS ............ 4 (C-EQ: custom equalizer)
ページ4に含まれる内容の要旨
LOCATION OF THE BUTTONS Control panel Display window s d g h j k l / z x c f 123 4 5 6 7 8 TAPE 9 p q w e r t y u i o ;a 1 (standby/on/attenuator) button o RND (random) button 2 Control dial ; Number buttons 3 SEL (select) button a Remote sensor 4 Display window 54 /¢ buttons Display window 65 23 (up/tape direction) button s Main display 70 (eject) button d Source/clock display 8° (down) button f Tuner reception indicators 9 (control panel release) button MO (monaural), ST (stereo) p TP/PT
ページ5に含まれる内容の要旨
2. Place the battery. Preparing the remote controller Slide the battery into the holder with the + side facing upwards so that the battery is fixed in This section is only for KS-LH6R. the holder. Lithium coin battery KS-LH4R can also be remotely controlled with an (product number: optionally purchased remote controller. We CR2025) recommend that you use remote controller RM-RK50 with your unit. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the
ページ6に含まれる内容の要旨
3 • Selects the preset stations (or service) while Remote controller listening to the radio (or the DAB tuner). Each time you press the button, the preset This section is only for KS-LH6R. station (or service) number increases, and KS-LH4R can also be remotely controlled as the selected station (or service) is tuned in. instructed here (with an optionally purchased • Skips to the previous disc while listening to remote controller). We recommend that you use the CD changer. remote controller RM-R
ページ7に含まれる内容の要旨
BASIC OPERATIONS TAPE 3 1 2 Turning on the power 3 Adjust the volume. To increase the volume. 1 Turn on the power. “HELLO” appears on the display. A To decrease the volume. Volume level appears. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. Volume or audio level To select the FM or AM tuner, press FM/AM meter (see page 27) DAB repeatedly. 4 Adjust the sound a
ページ8に含まれる内容の要旨
RADIO OPERATIONS TAPE Listening to the radio 2 Start searching a station. Press ¢ to You can use either automatic searching or manual search stations of searching to tune in to a particular station. higher frequencies. Searching a station automatically: Auto search Press 4 to search stations of 1 Select the band (FM1 – 3, AM). lower frequencies. When a station is received, searching stops. To stop searching before a station is received, F1 F2 F3 AM press the same button you have pressed for (F
ページ9に含まれる内容の要旨
• If you release your finger from the button, Searching a station manually: the manual mode will automatically turn off Manual search after 5 seconds. • If you hold down the button, the frequency 1 Select the band (FM1 – 3, AM). keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM – MW/LW) until you release the button. F1 F2 F3 AM (FM 1) (FM 2) (FM 3) When an FM stereo broadcast is hard to receive: 1 Press MODE (M) to enter the Note: functions mode while listening to This receiv
ページ10に含まれる内容の要旨
Manual preset Storing stations in memory You can preset up to 6 stations in each band (FM1, You can use one of the following two methods to FM2, FM3 and AM) manually. store broadcasting stations in memory. Ex.: Storing an FM station of 88.3 MHz into the • Automatic preset of FM stations: SSM (Strong- preset number 1 of the FM1 band. station Sequential Memory) • Manual preset of both FM and AM stations 1 Select the band (FM1 – 3, AM) you want to store stations into (in this FM station automatic p
ページ11に含まれる内容の要旨
Tuning in to a preset station 3 Press and hold the number button (in this example, 1) for more than 2 You can easily tune in to a preset station. seconds. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 10 and 11. 1 Select the band (FM1 – 3, AM). F1 F2 F3 AM (FM 1) (FM 2) (FM 3) Selected band/preset number and “MEMO” (memory) appear alternately for a while. 2 Select the number (1 – 6) for the preset station you want. 4 Repea
ページ12に含まれる内容の要旨
RDS OPERATIONS To use Network-Tracking Reception What you can do with RDS You can select the different modes of network- tracking reception to continue listening to the RDS (Radio Data System) allows FM stations to same programme in its finest reception. send an additional signal along with their regular When shipped from the factory, “AF” is selected. programme signals. For example, the stations send their station names, as well as information • AF: Network-Tracking Reception is about what type
ページ13に含まれる内容の要旨
Using TA Standby Reception 1 Press and hold SEL (select) for more than 2 seconds so that one of the TA Standby Reception allows the unit to switch PSM items appears on the display. temporarily to Traffic Announcement (TA) from the (PSM: see page 26.) current source (another FM station, tape or other connected components). • TA Standby Reception will not work if you are listening to an AM station. 2 Select “AF-REG (alternative frequency/regionalization reception)” if not shown on the Press TP/PTY
ページ14に含まれる内容の要旨
Using PTY Standby Reception 4 Finish the setting. PTY Standby Reception allows the unit to switch temporarily to your favourite programme (PTY: Programme Type) from the current source (another FM station, tape or other connected components). • PTY Standby Reception will not work if you are listening to an AM station. 7 When the current source is FM, the To select your favourite programme for PTY indicator either lights up or flashes. PTY Standby Reception • If the PTY indicator lights up, PTY St
ページ15に含まれる内容の要旨
Searching your favourite programme 2 Select one of the twenty-nine PTY codes. (See page 18.) You can search any one of the PTY codes. In addition, you can store your 6 favourite Selected code name programme types in the number buttons. appears on the display. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favourite programme types, see below. To search your favourite programme type, see page 16. 3 Press and hold the n
ページ16に含まれる内容の要旨
To search your favourite programme type Other convenient RDS functions and adjustments 1 Press and hold TP/PTY (T) for more than 2 seconds while listening to an FM station. Changing the display mode while listening to an FM station You can change the initial indication on the display to station name (PS NAME) or station frequency (FREQ) while listening to an FM RDS station. • See also “Changing the general settings (PSM)” on pages 25 and 26. 1 Press and hold SEL (select) for more than 2 seconds
ページ17に含まれる内容の要旨
Automatic selection of the station Automatic clock adjustment when using the number buttons When shipped from the factory, the clock built in this unit is set to be readjusted automatically using Usually when you press the number button, the the CT (Clock Time) data in the RDS signal. preset station is tuned in. If you do not want to use automatic clock However, when the preset station is an RDS station, adjustment, follow the procedure below. something different will happen. If the signals from
ページ18に含まれる内容の要旨
PTY codes NEWS: News SOCIAL: Programmes on social activities AFFAIRS: Topical programmes expanding RELIGION: Programmes dealing with any on current news or affairs aspect of belief or faith, or the INFO: Programmes which impart advice nature of existence or ethics on a wide variety of topics PHONE IN: Programmes where people can SPORT: Sport events express their views either by EDUCATE: Educational programmes phone or in a public forum DRAMA: Radio plays TRAVEL: Programmes about travel CULTURE:
ページ19に含まれる内容の要旨
TAPE OPERATIONS TAPE To stop play and eject the cassette Listening to a cassette Press 0. Tape play stops and the cassette automatically 1 Open the control panel. ejects from the cassette compartment. The source changes to the previously selected one. If you change the source, tape play also stops (without ejecting the cassette this time). • You can eject the cassette while the unit is turned off by pressing 0. 2 Insert a cassette into the cassette To fast-forward and rewind a tape compartment.
ページ20に含まれる内容の要旨
Finding the beginning of a tune To play back tapes recorded with the Dolby B NR* Multi Music Scan allows you to automatically start 1 Press MODE (M) to enter the functions mode playback from the beginning of a specified tune. while listening to a tape. You can specify up to 9 tunes ahead of or before “MODE” appears on the upper part of the the current tune. display, and the number buttons work as different function buttons. During playback Specify where (how many tunes ahead of 2 Press (Dolby B
