ページ1に含まれる内容の要旨
Instructions CD RECEIVER KW-XR810
ENGLISH
ESPAÑOL
FRANÇAIS
KW-XR810
CD RECEIVER / RECEPTOR CON CD /
RÉCEPTEUR CD
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
http://www.jvc.com
We can help you!
For canceling the display demonstration, see page 4. / Para cancelar la demostración en pantalla,
consulte la página 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4.
For ins
ページ2に含まれる内容の要旨
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no g
ページ3に含まれる内容の要旨
Thank you for purchasing a JVC product. How to read this manual Please read all instructions carefully before The following icons/symbols are used to operation, to ensure your complete indicate: understanding and to obtain the best possible Press and hold the button(s) performance from the unit. [Hold] until the desired operation begins. CONTENTS 3 How to read this manual Turn the control dial. 3 How to reset your unit 3 How to forcibly eject a disc Turn the control 4 Canceling the dis
ページ4に含まれる内容の要旨
Canceling the display demonstration 1 Turn on the power. 4 Select . DEMO Off On SET UP 2 DEMO 5 Finish the procedure. Clock [Hold] PRO EQ (Initial setting) 3 Select . DEMO Off On Setting the clock 1 Turn on the power. 6 Adjust the minute. Set Clock 1 : 00 AM SET UP 2 DEMO Clock [Hold] PRO EQ Clock Set Clock (Initial setting) 24H/12H Clock Adjust 3 Select . SET UP DEMO 7 Select <24H/12H>. Clock PRO EQ Clock Set Clock 24H/12H 4 Select . Clock Adjust Clock Set
ページ5に含まれる内容の要旨
Preparing the remote controller (RM-RK50) When you use the remote controller for the first Warning (to prevent accidents and time, pull out the insulation sheet. damage): • Do not install any battery other than CR2025 or its equivalent. • Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. Insulation sheet • Store the battery in a place where children For USA-California Only: cannot reach. This product contains a CR Coin Cell Lithiu
ページ6に含まれる内容の要旨
Basic operations Ejects the disc Loading slot Display window Selects preset station/channel. Control dial USB (Universal Serial Bus) input terminal Auxiliary input jack Remote sensor • DO NOT expose to bright sunlight. Changing the display information and pattern Ex.: When tuner is selected as the source Source operation display Audio level meter display • If a station has been assigned a title, station (, 33) title appears after about 5 seconds. • To assign a title to a station,
ページ7に含まれる内容の要旨
When you press or hold the following button(s)... Remote Main unit General operation controller Turns on. • When the power is on, pressing /I/ATT on the remote controller also mutes the sound or pauses. Press /I/ATT again to cancel muting or resume playback. Turns off if pressed and held. Selects the available sources (if the power is turned on). • If the source is ready, playback also starts. Adjusts the volume level. — Selects items. • Mutes the sound while listening to a source. If the sou
ページ8に含まれる内容の要旨
Listening to the radio ~ Ÿ ] “FM” or “AM” lights up when receiving an FM stereo broadcast with sufficient signal strength. Manual search Automatic presetting (FM)— “M” appears, then SSM (Strong-station Sequential Memory) press the button You can preset up to 18 stations for FM. repeatedly. [Hold] While listening to a station... 1 When an FM stereo broadcast is [Hold] hard to receive 2 1 [Hold] ] ] ] 2 “SSM” appears and local stations
ページ9に含まれる内容の要旨
Manual presetting (FM/AM) Title assignment You can preset up to 18 stations for FM and 6 You can assign titles up to 30 station stations for AM. frequencies (FM and AM) using 8 characters (maximum) for each title. Ex.: Storing FM station of 92.50 MHz into preset • If you try to assign titles to more than 30 number “4.” station frequencies, “Name Full” appears. 1 Delete unwanted titles before assignment. • When HD Radio tuner box is connected ( 22 ), this feature will be disabled. ] “92.50
ページ10に含まれる内容の要旨
Listening to a disc ~ Ÿ ] Turn on the power. All tracks will be played repeatedly until you change the source or eject the disc. Stopping playback and ejecting Selecting a folder/track on the the disc list “No Disc” appears. While listening to a disc.... Remove the disc, then press 1 SOURCE to listen to another playback source. ] Enter the list menu. Prohibiting disc ejection 2 [Hold] ] Select your desired item. To cancel the prohibition, repeat the same MP3/WMA: Select your desired folder
ページ11に含まれる内容の要旨
For MP3/WMA disc, you can also use the search Selecting the playback modes menu (A to Z, 0 to 9, and OTHERS) to scroll You can use only one of the following playback through the list menu. modes at a time. • “OTHERS” appears if the 1st character is not A 1 to Z or 0 to 9, such as #, —, !, and etc. While in list menu.... 1 Press 5/∞ to show the search menu. ] “Repeat” or “Random” • The first character of the current folder/file • Pressing and holding the control name appears. dial will ent
ページ12に含まれる内容の要旨
Listening to the USB device This unit is equipped with two USB input terminals (on the control panel and USB cable from the rear of the unit). You can use these two terminals at the same time. • You can also connect a USB Bluetooth Adapter, KS-UBT1 (supplied), ( 14) and/or an Apple iPod/iPhone ( 26) to the USB input terminal(s). This unit can play MP3/WMA/WAV tracks stored in a USB mass storage class device (such as a USB memory, Digital Audio Player, etc.). ~ ] Turn on the power. Ÿ USB inp
ページ13に含まれる内容の要旨
You can operate the USB device in the same • You cannot connect a computer to the USB way you operate the files on a disc. input terminal of the unit. ( 10, 11) • Make sure all important data has been backed • You can listen to WAV files by following the up to avoid losing the data. MP3/WMA file operations. ( 10, 11) • Electrostatic shock at connecting a USB device may cause abnormal playback of the Cautions: device. In this case, disconnect the USB device then reset this unit and the US
ページ14に含まれる内容の要旨
Refer also to the instructions supplied with the Bluetooth device. Preparation: • Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the unit. • Operate the device to turn on its Bluetooth function. ~ ] Turn on the power. Ÿ USB input terminal KS-UBT1 – – – – – – – – or – – – – – – – – USB cable from the rear of the unit Only one USB Bluetooth Adapter can be detected at a time. Pairing a device When you connect a Bluetooth device to the unit for the first
ページ15に含まれる内容の要旨
Hands-Free Audio 1 Display result Call Streaming [Hold] Connect OK ‡‡ [Device Name] 2 Handsfree OK ‡ — [Device Name] Audio Stream OK ] ] — ‡ [Device Name] 3 Connect Fail Try —— Reconnect ] Enter a PIN (Personal Identification The device remains registered even after you Number) code in to the unit. disconnect the device. Use You can enter any number you like or (or activate (1-digit to 16-digit number). , 20) to
ページ16に含まれる内容の要旨
Connecting/disconnecting a 1 • Received Calls * : Shows the list of the received calls. Go to the following registered device step. 1 1 • Missed Calls * : Shows the list of the [Hold] missed calls. Go to the following step. 2 • Phonebook * : Shows the name/ phone number of the phonebook 2 registered in the unit or from the 3 connected phone * . Go to the following step. ] ] or , 21
ページ17に含まれる内容の要旨
Selecting a contact from the 3 phonebook 1 ] Select the name/phone number you want to call. • When the sound is stopped or ] Enter “Call Menu” screen. interrupted during the use of a 2 Bluetooth device, turn off, then turn on the unit. – If the sound is not yet restored, connect the device again using ] . 3 How to enter phone number 1 Turn the control dial to select a number. 2 Press 4 /¢ to move the entry position. ] Show the search menu (A to Z, 0 to 3 Rep
ページ18に含まれる内容の要旨
• Only the existing characters will be shown on Switching the connected mobile phone the search menu. You can switch the current connected mobile • Press and hold 5/∞ to continuously change phone to the last connected mobile phone. the character of the search menu. • If your phonebook contains many contacts, [Hold] searching take some time. Phone icon appears and “Connecting” flashes Receiving/ending a phone call on the display. When the last connected When a call comes in, the source is
ページ19に含まれる内容の要旨
Using a Bluetooth audio player Operations and display indications differ depending on their availability on the connected device. ] Select “BT FRONT” or “BT REAR.” • If playback does not start automatically, operate the Bluetooth audio player to start playback. Selecting the playback modes Starts or resumes • For Bluetooth devices that support AVRCP 1.3. playback 1 Mutes the sound ] “Repeat” or “Random” • Pressing and holding the control dial will enter the playback mode menu. Turn the contro
ページ20に含まれる内容の要旨
Changing the Bluetooth settings 1 3 [Hold] ] Select a setting item, then repeat 2 the procedure to change the setting accordingly. ] ] • To return to the previous menu, press BACK. • To exit from the menu, press DISP or MENU. Setting item Selectable setting, [ Initial: Underlined ] Auto Connect • Last : The connection is established automatically with the last connected Bluetooth device when you turn on the unit. • Off : The unit does not connect the Bluetooth device aut
