Eclipse - Fujitsu Ten E-iSERV VCD3200の取扱説明書

ページ1に含まれる内容の要旨

E-iSERV Operation Guide
CD/USB Multi-Source Receiver with Bluetooth
wireless technology
We appreciate your purchase of this CD receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.

ページ2に含まれる内容の要旨

Motion Picture customization Importing display data Motion Picture Customize Load the Display data in the USB memory or CD-R, which is downloaded from the E-iSERV (website), to the main unit. For details of the operation, see ‘Importing display data (DISP Data)’ in the Owner’s Manual. The application for creating Motion Picture screens (Cutting Board) can be downloaded, allowing you to create your own original Motion Picture screens. You can create your own fi le by downloading the cutting boa

ページ3に含まれる内容の要旨

Load the downloaded data from the USB memory or CD-R to the unit. For details of 22 the operation, see 'Importing display data (DISP Data)' in the Owner's Manual.

ページ4に含まれる内容の要旨

Steering Remote Control Importing steering remote data (U.S.A. only) Steering Remote Control The vehicle’s factory loaded steering remote becomes inoperable when the CD3200 is installed. The ECLIPSE website (E-iSERV) provides software that enables steering remote operation even with the installation of the main unit. Import this software into your CD3200. How to operate the Steering Remote Control Download the file for Steering Remote setting from the E-iSERV website, then write 11 it to USB

ページ5に含まれる内容の要旨

Load the downloaded data from the USB memory or CD-R to the unit. For details 22 of the operation, see ' Reading steering remote data (U.S.A. only) ' in the Owner's Manual. ATTENTION • This function is available only for the vehicles that have steering remote with the voltage detection type interface. • For detail of the setting, please contact to ECLIPSE dealer.