ページ1に含まれる内容の要旨
XDMA450
INSTALLATION/OWNER'S MANUAL
AM/FM/CD Receiver with Detachable Face
Front and Rear Inputs
ページ2に含まれる内容の要旨
XDMA450 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove trim ring from unit. • Remove 2 transit screws located on
ページ3に含まれる内容の要旨
XDMA450 INSTALLATION Wiring Diagram Rear/Sub RCA Output Connect an external amp Front RCA Output Rear RCA Auxiliary Input Connect an external amp Connect a portable device Antenna Input Connect the vehicle antenna Steering Wheel Interface Input (PAC SWI-PS sold separately) FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XDMA450 uses one 10 amp ATM fuse located beside the
ページ4に含まれる内容の要旨
XDMA450 OPERATION Control Locations - Receiver 1 2 3 4 5 6 7 8 9 10 11 14 13 12 22 21 20 19 18 17 16 15 Power Preset 6 / Folder Up 1 12 Preset 5 / Folder Down Release 2 13 Preset 4 / Play / Pause Equalizer 14 3 Tune / Track Down 15 Preset 3 / Intro 4 Tune / Track Up 16 Preset 2 / Random 5 Volume / Select (push) 17 Preset 1 / Repeat 6 18 Display 7 Mode Up 19 Audio / Menu 8 Mode Down 9 Eject Band / Escape 20 USB Port Mute 10 21 Auxiliary Input Loudness 11
ページ5に含まれる内容の要旨
XDMA450 OPERATION Control Locations - Remote 1 2 3 4 5 18 6 17 7 16 8 9 15 10 14 11 13 12 Mode 1 Preset 6 / Folder Up 10 Volume Up 2 Loudness 11 Audio / Menu 3 Mute 12 Select / Power 4 EQ 13 Tune / Track Up 5 14 Preset 5 / Folder Down Volume Down 6 15 Preset 4 / Play / Pause Display 7 16 Preset 1 / Repeat Preset 3 / Intro 8 17 Band / Escape 9 Preset 2 / Random Tune / Track Down 18 5
ページ6に含まれる内容の要旨
XDMA450 OPERATION General Operation Power On/Off Press or any other button (except EJECT) to turn the unit on. Press to turn the unit off. Mode Press MODE UP or MODE DOWN to select between AM/FM, ® CD player, auxiliary front/rear, USB and operation of iPod / ® iPhone . Modes of operation are shown in the display. NOTE: CD, USB and operation of iPod modes will not appear unless a CD is inserted or USB/iPod devices are connected. A
ページ7に含まれる内容の要旨
XDMA450 OPERATION General Operation - Setup Menu Menu Function Options Action Auto Station Press SELECT to seek and save 6 strong stations in the AUTO STORE Store current band. (Tuner mode only) LOCAL OFF Activates distance tuning (Tuner mode only). Local/Distance Activates local tuning for strong station reception only (Tuner Tuning LOCAL ON mode only). Programs the unit to USA tuner spacing. FREQ USA Tuner (200kHz for FM and 10kHz for AM).
ページ8に含まれる内容の要旨
XDMA450 OPERATION General Operation Audio Press AUDIO momentarily to select between Bass, Treble, Balance, Fader, Subwoofer and Source Volume Level. BASS TREBLE BALANCE FADER SUBWOOFER* SOURCE LEVEL Bass Press AUDIO until BASS appears then rotate volume knob left/right to adjust ( -6 minimum / +6 maximum). Treble Press AUDIO until TREBLE appears then rotate volume knob left/right to adjust ( -6 minimum / +6 maximum). Ba
ページ9に含まれる内容の要旨
XDMA450 OPERATION AM/FM Tuner Operation Seek Tuning Press TUNE or TUNE for more than one second nn ll to seek to the next strong station. Manual Tuning Press TUNE or TUNE momentarily to change nn ll radio frequency up or down one step at a time. Press and hold to advance quickly. Band Press BAND to select between FM1, FM2, FM3, AM1 and AM2 bands. Storing and Recalling Up to 18 FM stations and 12 AM stations can be stored. To St
ページ10に含まれる内容の要旨
XDMA450 OPERATION CD Player Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Eject CD Press EJECT to eject the CD. The unit will change to previous mode of operation. If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD. Track Select Press TRACK to skip to the beginning
ページ11に含まれる内容の要旨
XDMA450 OPERATION CD Player Operation - MP3/WMA Files Playing an MP3/WMA Disc When an MP3/WMA encoded disc is first inserted, “DISC READ” will appear in the display. Depending on the number of files and folders, this may take several seconds. Displaying Information Press DISP to select between song title, artist, file name, folder name, track number, and clock/elapsed time. “NO ARTIST” or "NO TITLE" will be displayed if the MP3/ WMA
ページ12に含まれる内容の要旨
XDMA450 OPERATION CD Player Operation - MP3/WMA Files Folder/File Search Mode MP3/WMA CD mode features a file and folder search mode. This search allows navigating through folders to find a specific MP3 or WMA file for playback. Step 1 Press SELECT to enter the file/folder search mode. A list of all the folders on the CD will be displayed. Note: Any files located in the root directory will be located in the folder named "ROOT".
ページ13に含まれる内容の要旨
XDMA450 OPERATION CD Player Operation - MP3/WMA Files Folder Access Press to select the previous folder. Press to select the next folder. *Folder access is only available on MP3/WMA discs recorded with more than one folder. Repeat Press RPT to enter the Repeat menu, then turn the volume knob to select one of the following options: • ALL - Plays all tracks on CD. • TRACK - Continuously repeats selected tr
ページ14に含まれる内容の要旨
XDMA450 OPERATION CD Player Operation - MP3/WMA Files Media Compatibility The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-D A • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management). • WMA lossless format • Discs recorded with Track At Once or packet writing • MP3 PRO format • MP3 playlists • WAV format Playba
ページ15に含まれる内容の要旨
XDMA450 OPERATION CD Player Operation - MP3/WMA Files Additional MP3/WMA An internal buffer provides ESP (Electronic Skip Protection) to Information virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-D A or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do
ページ16に含まれる内容の要旨
XDMA450 OPERATION USB Operation Connecting a USB Device To play MP3/WMA files from most USB mass storage (sold separately) devices, line up the USB connector and insert the USB device into the XDMA450's USB port. Playing Music When a USB device is first connected, “USB READ” will appear in the display and playback will begin momentarily. Depending on the number of files and folders, it may take several seconds for the device to
ページ17に含まれる内容の要旨
XDMA450 OPERATION USB Operation Displaying Information When a file is accessed, the clock and elapsed time will be displayed. Press DISP momentarily to select beween song title, artist, file name, folder name, track number and clock/ elapsed time. "NO TITLE" will be displayed if no song title information is available. "NO ARTIST" will be displayed if no artist information is available. Song Title Icon This icon will illuminate when
ページ18に含まれる内容の要旨
XDMA450 OPERATION USB Operation Character Support Maximum character display information • Track name – 32 character maximum • Directory name – 32 character maximum • *Song title – 32 character maximum • *Artist name – 32 character maximum *Song title and artist name will only be displayed if included with the MP3/WMA file. Media Compatibility The following types of files are compatible: • MP3 data • WMA data The following types of file
ページ19に含まれる内容の要旨
XDMA450 OPERATION USB Operation Additional MP3/WMA Only MP3 files with filename extension (.mp3) can be played. Information Only WMA files with filename extension (.wma) can be played. Do not attempt to play non-MP3/WMA files with the MP3/WMA extension. Sampling Frequency Rates MP3 8kHz ~ 48kHz WMA 32kHz ~ 48kHz Transfer Bit rates MP3 32kbps ~ 320kbps constant Variable bit rates WMA 32kbps ~ 192kbps constant Variable bit rates Note: Some file
ページ20に含まれる内容の要旨
XDMA450 OPERATION Operation of iPod/iPhone Connecting an iPod/iPhone Device USB Connection Using the "dock connector to USB" sync cable (provided with the iPod/iPhone device), plug the USB cable into the XDMA450's USB port. Once connected, playback will begin automatically. Controlling a Device: Full Control When the control of iPod/iPhone feature is set to "FULL" in the iPod Menu, use the following functions to control the device:
