ページ1に含まれる内容の要旨
X2DMA400
INSTALLATION/OWNER'S MANUAL
AM/FM Receiver with Remote Control
TM
ページ2に含まれる内容の要旨
X2DMA400 OPERATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove trim ring from unit, • Insert the supplied keys into the
ページ3に含まれる内容の要旨
X2DMA400 OPERATION Wiring Diagram YELLOW - Rear RCA Input Connect a portable device BLACK - Antenna Input Connect the vehicle antenna RCA Preamp Outputs External Amplifer Connections SiriusXM Vehicle Tuner Connection (tuner sold separately) Steering Wheel Interface Input (PAC SWI-PS sold separately) FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The X2DMA400 uses one 10 amp ATM
ページ4に含まれる内容の要旨
X2DMA400 OPERATION Control Locations - Receiver 1 2 3 4 5 6 7 8 9 21 20 19 18 17 16 15 14 13 12 11 10 Source / Power ( ) 12 USB Port 1 13 Eject Preset 6 / Folder Up 2 14 Mute / T ag Preset 5 / Folder Down 3 15 4 Display Preset 4 / Play / Pause 5 Volume Knob 16 Preset 3 / Intro 6 Back / Band Preset 2 / Random 17 7 Select Preset 1 / Repeat 18 8 Audio / Menu Tune / Track Up 19 Tuning Knob Reset 9 20 Auxiliary Input Tune / Track Down 10 21 SD Card Slot 1
ページ5に含まれる内容の要旨
X2DMA400 OPERATION Control Locations - Remote 1 2 3 4 5 21 6 20 7 19 8 18 9 17 10 16 11 15 12 13 14 Key 9 1 Source / Power ( ) 12 Category Up (SXM) 13 2 Select Key 0 / Display 14 3 Volume Up 15 Category Down (SXM) 4 Audio / Menu Key 7 5 Tune / Track Up 16 Key 8 6 Volume Down 17 Preset 4 / Play / Pause 18 7 Mute / T ag Preset 1 / Repeat 8 Preset 2 / Random 19 Band / Back Preset 3 / Intro 20 9 Tune / Track Down Preset 6 / Folder Up 21 10 Preset
ページ6に含まれる内容の要旨
X2DMA400 OPERATION General Operation Power On/Off Press or any other button to turn unit on. Press and hold to turn unit off. Source Press SOURCE to select one of the following audio sources: AM/FM Tuner Mode CD Player Mode Auxiliary Input (front/rear) Modes USB and Operation of iPod/iPhone Modes SD Card Mode SiriusXM Satellite Radio Mode When a source is selected, a red line will appear underneath the corresponding icon in the source
ページ7に含まれる内容の要旨
X2DMA400 OPERATION General Operation Auxiliary Input Insert 3.5 mm plug to connect your portable audio device. Volume Adjust volume using volume knob (00-46). Mute Press MUTE to silence the audio. Press MUTE again to cancel. Reset Press the RESET button, located in the bottom left corner of the front panel, to reset the unit back to the factory settings if abnormal operation occurs. Display Press DISP to toggle between items such as cloc
ページ8に含まれる内容の要旨
X2DMA400 OPERATION Setup Menu Press and hold AUDIO/MENU for more than 3 seconds to access the setup menu, then press AUDIO/MENU to cycle through menu options. When desired option appears in the display, rotate the tuning knob left/right to adjust or activate desired function. Press BACK to exit any menu or submenu. Function Options Action AUTO PGM Press SELECT to begin automatically programming strong radio stations Auto Station Store
ページ9に含まれる内容の要旨
X2DMA400 OPERATION Audio Menu Press AUDIO/MENU momentarily to cycle between Bass, Treble, Balance, Fader, Equalizer, *Subwoofer, and Source Volume Level. Press BACK at any time to exit the audio menu. BASS TREBLE BALANCE FADER EQ SUBWOOFER SOURCE LEVEL Press AUDIO/MENU until BASS appears, then rotate the Bass tuning knob left/right to adjust (-6 minimum / +6 maximum). Press AUDIO/MENU until TREBLE appears
ページ10に含まれる内容の要旨
X2DMA400 OPERATION LCD Icon Layout SiriusXM Stereo FM EQ Random Signal Indicator Reception SiriusXM Loudness Repeat Intro Channel Number CD-in Artist Name File Name Song Title AlbumName Folder Name AM/FM Tuner Operation Seek Tuning Press TUNE or TUNE to seek the next strong nn ll station. Manual Tuning Rotate the tuning knob to move radio frequency up or down one step at a time. Tuning - Remote Control Using the remote control: • Press TUNE or TUNE mo
ページ11に含まれる内容の要旨
X2DMA400 OPERATION CD Player Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Eject CD Press EJECT to eject the CD. The unit will change to previous mode of operation. If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD. Track Select Rotate tuning knob right to skip to
ページ12に含まれる内容の要旨
X2DMA400 OPERATION CD Player Operation - MP3/WMA Files MP3/WMA Discs When an MP3/WMA encoded disc is first inserted, “READING” will appear in the display. Depending on the number of files and folders, this may take several seconds. Folder Access Press to select the next folder. Press to select the previous folder. *Folder access is only available on discs recorded with more than one folder. Repeat Press RPT to enter the Repeat me
ページ13に含まれる内容の要旨
X2DMA400 OPERATION CD Player Operation - MP3/WMA Files File/Folder Search Press SELECT to enter the file/folder search mode. A list of all the folders from the CD will be displayed. Note: Any files located in the root directory will be located in the folder named "ROOT". Choose a Folder Turn the tuning knob to cycle through all the folders on the CD, and press SELECT to choose the desired folder. The list of files in the selec
ページ14に含まれる内容の要旨
X2DMA400 OPERATION CD Player Operation - MP3/WMA Files File/FolderCompatibility and Support • CD-ROM (ISO), CD-R, CD-RW • CD-D A (digital audio) Compatible File Types • MP3 data (.mp3) • WMA data (.wma) • AAC data (.m4a) • WAV lossless • FLAC lossless • OGG data • DRM protected files Incompatible File Types • WMA lossless • Apple lossless • WMA Pro • MP3 Pro • MP3 playlists • ISO9660 level 1 & level 2 Recording Format • Yellow book
ページ15に含まれる内容の要旨
X2DMA400 OPERATION Operation of iPod/iPhone Connecting an iPod/iPhone Device USB Connection Using the "dock connector to USB" sync cable (provided with the iPod/iPhone device), plug the USB cable into the X2DMA400's USB port . Once connected, p layback will begin automatically. Controlling a Device: Full Control When the control of iPod/iPhone feature is set to "FULL" in the iPod Menu, use the following functions to control the device:
ページ16に含まれる内容の要旨
X2DMA400 OPERATION Operation of iPod/iPhone Controlling a Device:Full Control - Music Search Menu The X2DMA400 features a powerful music search that simplifies the searching process. Follow the steps below to find the desired song: Begin Searching Press SELECT to begin the search. The main search menu will appear. Select a Category Turn the tuning knob to select between artists , albums , songs, playlists, podcasts and audiobooks. Press SELECT t
ページ17に含まれる内容の要旨
X2DMA400 OPERATION Operation of iPod/iPhone Controlling a Device: Manual Control When the control of iPod/iPhone feature is set to "MANUAL" in the iPod Menu, use the following functions to control the device: Manual Control for iPod When "MANUAL" control is selected from the iPod Menu, the iPod or iPhone device can be controlled directly from the device's interface. All functions except for volume can be used from the iPod or iPhon
ページ18に含まれる内容の要旨
X2DMA400 OPERATION USB/SD Card Operation Connecting a USB Device To play MP3/WMA files from most mass storage (sold separately) devices,connect a device to the X2DMA400's USB port. Connecting a SD Card To play MP3/WMA files from an SD Card, insert an SD card (sold separately) into the X2DMA400's SD card slot with the label facing up, and press the card until it clicks into place. Remove the SD card by pressing in until it clicks,
ページ19に含まれる内容の要旨
X2DMA400 OPERATION USB / SD Card Operation File and Folder Search Begin Searching Press SELECT to enter the file/folder search mode. A list of all the folders from the USB/SD device will be displayed. Note: Any files located in the root directory will be located in the folder named "ROOT". Choose a Folder Turn the tuning knob to cycle through all the folders on the device, and press SELECT to choose the desired folder. The li
ページ20に含まれる内容の要旨
X2DMA400 OPERATION USB / SD Card Operation File/Folder Compatibility and Support • CD-ROM (ISO), CD-R, CD-RW • CD-D A (digital audio) Compatible File Types • MP3 data (.mp3) • WMA data (.wma) • AAC data (.m4a) • WAV lossless • FLAC lossless • OGG data • DRM protected files Incompatible File Types • WMA lossless • Apple lossless • WMA Pro • MP3 Pro • MP3 playlists • ISO9660 level 1 & level 2 Recording Format • Yellow book MODE 1 & MO
