ページ1に含まれる内容の要旨
OWNER’S MANUAL
AND
INSTALLATION GUIDE
MS1500
MARINE HIGH POWER AM/FM STEREO RADIO WITH
C O M PACT DISC PLA YER, CDC SHUTTLE CONTROLS,
Visit us at www.asaelectronics.com to see our full line of mobile audio and video products. AND WIRED REMOTE CAP A B I L I T Y
MADE IN CHINA
ページ2に含まれる内容の要旨
I N S T A L L A T I O N Preparation Please read entire manual before installation. Before You Start 1.Disconnect negative battery terminal. (consult a qualified technician for instructions) 2.Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started 1.Remove 2 transit screws located on top of the unit. 2. Insert the supplied keys into the slots as shown, and slide the
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
BASIC OPERATION Equalizer Selector (EQ ) Power (PWR) Press E Q to apply sound effects to the unit's audio output signal. When activated, the EQ Press PWR or any other button (except EJECT) to turn the unit on. Inserting a CD will turn function will access one of the following modes: CLASSICS, POP M, or ROCK M. FLAT the unit on automatically. Press PWR to turn the unit off. indicates no equalizer enhancements of the program, thereby removing the preset sound LCD Panel effects. DSP OFF inhibits
ページ5に含まれる内容の要旨
RADIO OPERATION Seek Tuning Store and Recall a Station Up to 24 stations (six on each band) can be stored as presets. Press the up or down tuning button momentarily to seek the next strong station in the current This radio contains special circuitry which does not require a voltage source connected to the band. radio to maintain memories. Manual Tuning 1.Press the up or down tuning buttons for more than two seconds to select manual tuning mode. 1.To store a station, select the desired b
ページ6に含まれる内容の要旨
CD CHANGER OPERATION FOR OPTIONAL ACC56M CHANGER CD PLAYER OPERATION Insert CD TRACK UP/DOWN With the label surface facing up, gently insert the disc into the slot until the soft-loading The Track Select function is used to quickly access the beginning of a particular track. Press mechanism engages and disc play begins. "S-CDP" will appear in the display momentarily, and Track Up or Track Down to locate the desired track as shown by the track number indication on the CD icon will become anima
ページ7に含まれる内容の要旨
INSTALLATION OF THE OPTIONAL ACC56M CD CHANGER Shuffle mode can be cancelled by pressing the Preset #4(Shuffle) button again, or by activating the Scan or Repeat functions. When the Preset #4(Shuffle) button is pressed and held longer than 2 seconds, the SHF and DISC indications will appear on the LCD panel and the discs in the magazine will be played in a random shuffled order, as well as the tracks on each disc. When all the tracks on the selected disc have been played, the next disc will be s
ページ8に含まれる内容の要旨
CD PLAYER TROUBLESHOOTING WIRED REMOTE CONTROL (REMMS1500 OPTION) Mounting Remote Possible Cause Corrective Action Problem The REMMS1500 comes with an aluminum mounting bracket that has 4 (four)notches cut Does not operate No power to yellow or red wire; Inline fuse Check connection with test light; check vehicle into it so the bracket can be broken away for different mounting depths. b l o w n fuse with test light; Replace fuse No power to unit Inline fuse blown Replace fuse Speakers not operat
ページ9に含まれる内容の要旨
S P E C I F I C A T I O N S CD / CD CHANGER Signal-to-noise >86dB Frequency response 20Hz-20kHz, 3dB Channel separation @ 1kHz >65dB D/A converter 1 Bit/CH FM Tuner Tuning range 87.5MHz-107.9MHz FM mono sensitivity 12dBf 50dB quieting sensitivity (stereo) 16dBf Stereo separation @ 1kHz 40dB Frequency response 30Hz-13kHz, 3dB AM Tuner Tuning range 530kHz-1710kHz AM sensitivity 30uV Frequency response 80Hz-2kHz, 3dB General Total system power 160 Watts Peak Power output 40Wx4 Powe
ページ10に含まれる内容の要旨
M E N U 1 6
