ページ1に含まれる内容の要旨
4-157-841-11(1)
®
Bluetooth
Audio System
US
Operating Instructions
FR
Mode d’emploi
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. MEX-BT2800 Serial No.
To cancel the demonstration (DEMO) display, see page 7.
Pour annuler l’affichage de démonstration (DEMO), reportez-vous à l
ページ2に含まれる内容の要旨
This device complies with Part 15 of the FCC Be sure to install this unit in the dashboard of Rules and RSS-Gen of IC Rules. Operation is the car for safety. For installation and subject to the following two conditions: (1) this connections, see the supplied installation/ device may not cause harmful interference, and connections manual. (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Warning This transmitter
ページ3に含まれる内容の要旨
The “SAT Radio Ready” logo indicates that this product will control a satellite radio tuner module (sold separately). Please see your nearest authorized Sony dealer for details on the satellite radio tuner module. “SAT Radio,” “SAT Radio Ready,” the SAT Radio and SAT Radio Ready logos and all related marks are trademarks of Sirius XM Radio Inc. and XM Satellite Radio Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporati
ページ4に含まれる内容の要旨
Table of Contents Getting Started Bluetooth (Handsfree calling and Music streaming) Playable discs on this unit . . . . . . . . . . . . . . . . . 6 Notes on Bluetooth . . . . . . . . . . . . . . . . . . . . . . 6 Bluetooth operations. . . . . . . . . . . . . . . . . . . . 18 Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 6 Pairing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Canceling the DEMO mode . . . . . . . . . . . . . . . 7 About Bluetooth icons . . .
ページ5に含まれる内容の要旨
Support site If you have any questions or for the latest support information on this product, please visit the web site below: http://esupport.sony.com http://www.xplodsony.com/ Provides information on: � Models and manufacturers of compatible cellular phones and the FAQ about Bluetooth function 5
ページ6に含まれる内容の要旨
Radio frequency exposure Getting Started RF signals may affect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic Playable discs on this unit antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation This unit can play CD-DA (also containing CD or service of this device, please consult with the TEXT) and CD-R/CD-RW (MP3/WMA files manufacturer or its representative
ページ7に含まれる内容の要旨
Canceling the DEMO mode Detaching the front panel You can cancel the demonstration display which You can detach the front panel of this unit to appears during turning off. prevent theft. 1 Press and hold the select button. Caution alarm The setup display appears. If you turn the ignition switch to the OFF 2 Press the select button repeatedly position without detaching the front panel, the until “DEMO” appears. caution alarm will sound for a few seconds. The alarm will only sound if the built-
ページ8に含まれる内容の要旨
Quick Guide for Bluetooth function For full details on operation, see “Bluetooth (Handsfree calling and Music streaming)” (page 18) and the Bluetooth device operating instructions. 3 steps to Bluetooth function 1 Pairing First, register (“pair”) Bluetooth device (cellular phone, etc.) with this unit. Pairing is no longer required after the first time. 2 Connection Sometimes pairing allows to connect automatically. To use the device after pairing is made, start the connection. 3 Handsfree cal
ページ9に含まれる内容の要旨
Buttons and icons Icons Icon status descriptions Lit Bluetooth signal on Flashing Pairing standby mode None Bluetooth signal off Lit Cellular phone connection successful Flashing Unit connecting to cellular phone None No connection Lit Audio device connection successful Flashing Unit connecting to audio device None No connection 9
ページ10に含まれる内容の要旨
1 Pairing Operated Operation equipment Press and hold (BT) for about 5 seconds. 1 t Search for this unit. 2 3 Select “XPLOD”. Input passkey “0000”. 4 Follow display directions. 5 6 (Pairing successful) 2 Connection Operated Operation equipment Press and hold (BT) for about 3 seconds. 1 t Connect to this unit using a cellular phone. 2 t Connect to this unit using an audio device. t Note You can connect from this unit to a Bluetooth device (page 19). If you cannot connect from this unit to the
ページ11に含まれる内容の要旨
3 Handsfree calling and Music streaming Handsfree calling To do Operation Receive a call/end a call Press . Reject a call Press and hold for 2 seconds. Redial 1 Press (SOURCE/OFF). t 2 Press and hold for 3 seconds. To transfer a call Press and hold for 2 seconds. Music streaming To do Operation Listen 1 Press (SOURCE/OFF). t 2 Press Start playback on the audio device. Play back/pause (AVRCP)* Press (6) (PAUSE). Skip tracks (AVRCP)* Press ./>. * The operation may differ depending on the au
ページ12に含まれる内容の要旨
Location of controls and basic operations Main unit 1 234 5 6 78 SOURCE OFF SEEK AUX MODE BT SEEK SCRL DSPL CAT ALBUM REP SHUF MIC PAUSE PTY 12345 6 9q; qa qs qd qf Front panel removed This section contains instructions on the location of controls and basic operations. qg qh For details, see the respective pages. A SEEK +/– buttons CD: To skip tracks (press); skip tracks continuously (press, then press again within RESET about 1 second and hold); reverse/fast- forward a track (press and hold)
ページ13に含まれる内容の要旨
D Control dial/select / (handsfree) M Number buttons button CD: (1)/(2): ALBUM –/+ (during MP3/WMA To adjust volume (rotate); select setup items playback) (press and rotate); receive/end a call (press). To skip albums (press); skip albums E Disc slot continuously (press and hold). 4 Insert the disc (label side up), playback (3): REP* page 17 starts. (4): SHUF page 17 (6): PAUSE F Display window To pause playback. To cancel, press G AUX input jack page 23 again. Radio: To connect a portab
ページ14に含まれる内容の要旨
Remove the insulation film before use (page 7). Card remote commander RM-X304 A OFF button To turn off; stop the source. 1 6 1 B SOURCE button* OFF ATT To turn on; change the source (Radio/CD/ 7 2 AUX/Bluetooth audio/Bluetooth phone). SOURCE SEL MODE 8 C < (.)/, (>) buttons 3 To control Radio/CD/Bluetooth audio, the + same as (SEEK) –/+ on the unit. 9 Setup, sound setting, etc., can be operated by < ,. – DSPL SCRL 0 D DSPL (display) button 4 To change display items. 13 2 2 E VOL (volume) +* /
ページ15に含まれる内容の要旨
Storing manually Radio 1 While receiving the station that you Storing and receiving stations want to store, press and hold a number button ((1) to (6)) until Caution “MEM” appears. When tuning in stations while driving, use Best Note Tuning Memory (BTM) to prevent an accident. If you try to store another station on the same number button, the previously stored station will be replaced. Storing automatically — BTM Receiving the stored stations 1 Press (SOURCE/OFF) repeatedly until “TUNER” a
ページ16に含まれる内容の要旨
RDS services Setting CT This unit automatically provides RDS services as follows: 1 Set “CT-ON” in setup (page 22). Notes PTY (Program Types) � The CT function may not work even though an RDS Displays the currently received program type. station is being received. Also searches your selected program type. � There might be a difference between the time set by the CT function and the actual time. CT (Clock Time) The CT data from the RDS transmission sets the clock. Notes � Depending on the co
ページ17に含まれる内容の要旨
Repeat and shuffle play CD 1 During playback, press (3) (REP) or (4) (SHUF) repeatedly until the Display items desired setting appears. Select To play TRACK track repeatedly. ALBUM* album repeatedly. SHUF ALBUM* album in random order. A Source 1 1 B Track name* , Disc/artist name* , Artist SHUF DISC disc in random order. 1 2 1 name* , Album number* , Album name* , Track number/Elapsed playing time, Clock * When an MP3/WMA is played. *1 The information of a CD TEXT, MP3/WMA is To return to
ページ18に含まれる内容の要旨
A list of detected devices appears in the Bluetooth (Handsfree calling display of the device to be connected. This unit is displayed as “XPLOD” on the device and Music streaming) to be connected. Bluetooth operations To use the Bluetooth function, the following DR-BT30Q XPLOD procedure is necessary. XXXXXXX 1 Pairing When connecting Bluetooth devices for the first time, mutual registration is required. This is called “pairing.” This registration (pairing) 4 If Passkey* input is required on
ページ19に含まれる内容の要旨
Connecting an audio device Connection 1 Be sure that both this unit and the If pairing has already been achieved, start audio device are switched to operation from here. Bluetooth signal on. 2 Connect to this unit using the audio To switch the Bluetooth signal device. output of this unit to on “ ” appears when the connection is made. To use the Bluetooth function, switch the Bluetooth signal output of this unit to on. 1 Press and hold (BT) until “ ” lights (about 3 seconds). Bluetooth sig
ページ20に含まれる内容の要旨
� Voice dialing may not work in some situations, Making calls depending on the effectiveness of the cellular phone’s recognition function. For details, see the In the case of making calls from this unit, redial support site (page 18). is used. Tips 1 Press (SOURCE/OFF) repeatedly until � Speak in the same way as you did when you stored “BT PHONE” appears. the voice tag. � Store a voice tag while seated in the car, via this unit 2 Press and hold (handsfree) for 3 with “BT PHONE” source s
