ページ1に含まれる内容の要旨
Mobile Color TV
GB
Operating Instructions
DE
Bedienungsanleitung
For installation and connections, see the supplied installation/connections
manual.
Zur Installation und zum Anschluß siehe die mitgelieferte Installations-/
Anschlußanleitung.
XTL-750W
2000 Sony Corporation
ページ2に含まれる内容の要旨
Welcome! Thank you for purchasing the Sony Mobile Colour TV. • This unit can receive the TV broadcasts in the United Kingdom and other CCIR B/G system areas such as Germany. • You can connect both PAL and NTSC video playback units. • The low reflection liquid crystal panel reduces the glare from outside lighting sources. • You can manually adjust the brightness of the display according to the prevailing light conditions of the surrounding environs. • The visual off function turns the picture off
ページ3に含まれる内容の要旨
Table of Contents Warning and Precautions ..................................................................................... 4 Getting Started Selecting a TV system ........................................................................................ 5 Storing TV stations automatically (Automatic memory function) ............. 6 Watching a TV Programme ................................................................................. 7 Viewing the Wide Screen ...............................
ページ4に含まれる内容の要旨
Warning and Precautions Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. Fuse replacement When replacing the fuse, be sure to use one that matches the amperage described on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Fuse GB Precautions • Do not mount th
ページ5に含まれる内容の要旨
Getting Started Selecting a TV system Set the TV system selector on the side of the TV tuner unit, to the correct position for your area. TV system selector Areas except United Kingdom: set to 1 United Kingdom: set to 2 If you select TV system 1 on the TV tuner unit, press (ITALY) on the wireless remote. If the picture does not appear, press (ITALY) again. GB NAVI TV/VIDEO ITALY ITALY button SEL VOL SEEK V OFF A MEM DSPL 2SEC 123 456 789 10 11 12 When you select TV system 1, the TV programme num
ページ6に含まれる内容の要旨
(Continued) Storing TV stations automatically (Automatic memory function) You can store up to 12 VHF/UHF stations. VHF stations on programme numbers 2 through 12 are stored on the programme number buttons. UHF stations on programme numbers 21 through 69 are stored in order after the stored VHF stations. 2 2 1 NAVI TV/VIDEO ITALY SEL VOL SEEK V OFF A MEM DSPL 2SEC GB 3 123 456 Programme 789 number buttons 10 11 12 POWER indicator 1 Press (POWER) on the TV. The POWER indicator lights up. 2 Press (
ページ7に含まれる内容の要旨
Watching a TV Programme Note The TV picture does not appear while the car is moving for safety reasons. 1 3 NAVI TV/VIDEO ITALY SEL VOL SEEK SEEK button 3 V OFF A MEM DSPL DSPL button 2SEC 123 456 2 789 10 11 12 POWER indicator GB 1 Press (POWER). The POWER indicator lights up. 2 Press the programme number buttons (1 through 12) to select the desired TV station. The TV programme number appears for five seconds in the upper right corner of the display each time you select a station. 3 Adjust the
ページ8に含まれる内容の要旨
Viewing the Wide Screen In addition to normal screen mode, full screen, zoom screen, and wide-zoom screen modes are also available. SELECT button GB Press (SELECT). Pressing (SELECT) switches the screen mode in the following sequence: c Normal (regular) screen Full screen An image with an aspect ratio An image with an aspect ratio of 4 to 3 (regular image). of 4 to 3 enlarged to the left and right edges of the screen. X x C Wide-zoom screen Zoom screen An image with an aspect ratio An image wit
ページ9に含まれる内容の要旨
Tips • With this operation: — The wireless remote does not work. — Beeps are deactivated. — The screen size type is not displayed. • When you turn on the unit again, the screen mode is reset to full screen. • Images may appear coarse-grained when viewed in the zoom screen mode. • This unit is manufactured according to wide-zoom specifications for typical home-use wide TV sets. • Changing the screen mode will also change the scale of the map screen on your navigation system. GB 9
ページ10に含まれる内容の要旨
Watching a Video Note The video picture does not appear while the car is moving for safety reasons. You can watch video CDs and cassettes recorded in either the PAL or NTSC colour system. Make sure you have connected a video player to the TV tuner unit correctly. For details, see the Installation/Connections manual. 2 1 2 NAVI TV/VIDEO ITALY SEL VOL SEEK GB V OFF A MEM DSPL 2SEC 123 456 789 10 11 12 POWER indicator 1 Press (POWER). The POWER indicator lights up. 2 Press (TV/VIDEO) to select the
ページ11に含まれる内容の要旨
Listening to the TV/video Sound with the Picture Off (Visual off function) NAVI TV/VIDEO ITALY SEL VOL SEEK V OFF A MEM DSPL 2SEC V (visual) OFF button 123 456 789 10 11 12 Press (V OFF) for two seconds. GB You only hear the sound of the selected programme. To cancel the visual off function, press (V OFF) again. If you turn the unit off or turn the ignition switch to the OFF position, the visual off function will be cancelled. The visual off function is also canceled when you select another TV p
ページ12に含まれる内容の要旨
Adjusting the Picture You can adjust the colour, hue and brightness of the picture. 1 NAVI TV/VIDEO ITALY 3 SEL VOL SEEK 2 V OFF A MEM DSPL 2SEC 123 456 789 10 11 12 POWER indicator GB 1 Press (POWER). The POWER indicator lights up. 2 Press (SEL). Each time you press (SEL), the items change as follows. HUE COL (colour) BRIGHT (brightness) COL HUE BRIGHT RG Note You do not need to adjust HUE when watching a TV programme or playing back PAL video sources. When you press (SEL), only COL and BRIGHT
ページ13に含まれる内容の要旨
Tips • To restore the factory settings, press (SEL) for more than two seconds. VISUAL STD (standard) appears. • When the picture is too dark or too bright from the viewing position, press (SEL) to select BRIGHT and press (+) or (-). GB 13
ページ14に含まれる内容の要旨
Adjusting the Screen Brightness (Auto bright control) Depending on the surrounding light, you can adjust the screen brightness by controlling the brightness of the fluorescent pipe installed in the liquid crystal panel. Change the DIMMER selector located on the side of the monitor to LOW, HIGH or AUTO. Side of the monitor HIGH AUTO DIMMER LOW LOW: Reduces the screen brightness. GB HIGH: Increases the screen brightness. AUTO: The unit responds to the surrounding light and adjusts the screen brigh
ページ15に含まれる内容の要旨
Using the Navigation System You can display navigation information by connecting an optional navigation system. 2 1 NAVI TV/VIDEO ITALY 2 SEL VOL SEEK V OFF A MEM DSPL NAVI 2SEC 123 456 789 10 11 12 POWER indicator GB 1 Press (POWER). The POWER indicator lights up. 2 Press (NAVI) momentarily. NAVI appears for five seconds in the upper left corner of the screen. Note As of January 2000, the Sony navigation system will be not available. 15
ページ16に含まれる内容の要旨
Listening to the TV/video Sound while Using the Navigation System (Simultaneous play function) You can listen to the TV or video sound even while the navigation system is on. NAVI TV/VIDEO ITALY 2 SEL VOL SEEK V OFF A MEM DSPL 2SEC 123 456 789 10 11 12 GB 1 Press (POWER) and select a TV programme, or select VIDEO 1 or VIDEO 2 and begin video playback. 2 Press (NAVI) for two seconds. The navigation display appears, and the sound of the selected TV programme or video is heard. Listening to another
ページ17に含まれる内容の要旨
Location of Controls SELECT button Monitor Brightness sensor SEARCH button NAVI button TV/VIDEO button POWER (on/off) switch DIMMER (LOW/HIGH/ AUTO) selector VOL (volume) button Left speaker* Right speaker* GB POWER Wireless remote sensor indicator * Monaural sound is heard from the left and right loudspeakers. Wireless remote NAVI (navigation) button (Press for two seconds for TV/VIDEO button simultaneous play function.) ITALY button NAVI TV/VIDEO ITALY +/- button SEEK button SEL (select) butto
ページ18に含まれる内容の要旨
Additional Information Installing the batteries Two size AA (R6) batteries (not supplied) Battery life is about six months depending on the amount you use the wireless remote. GB Notes on batteries To avoid damage from battery leakage and subsequent corrosion: — insert the batteries matching the “+” and “–” ends on the batteries to the “+” and “–” diagrams inside the battery compartment — do not use an old battery with a new one, or different types of batteries together — remove the batteries wh
ページ19に含まれる内容の要旨
About the liquid crystal display (LCD) panel • Do not press on the LCD panel on the monitor unit as doing so can distort the picture or cause a malfunction. The picture may become unclear, or the LCD panel may be damaged. • Notes on cleaning — Clean the LCD panel with a slightly damp soft cloth. — Do not use solvents such as benzine, thinner, commercially available cleaners or antistatic spray. • Do not use this unit in temperatures under 5° C or over 45° C. • If your car was parked in a cold or
ページ20に含まれる内容の要旨
Specifications Monitor (XVM-753W) System Liquid crystal colour display Input terminals Display Transparent TN LCD panel Video input (2 system): RCA pin 1 Vp-p, Drive system TFT active matrix system 75 ohm Picture size 7 in.; 155.52 × 87.75 mm, 178.57 mm Audio input: RCA pin -10 dBs, 10 kohm (w × h, diagonally) Aerial input (4 system): mini plug Picture segment Navigation input: Square 16-pin 336.960 (w 1440 × h 234 ) (exclusive) Speaker type 35 × 20 mm dynamic speaker × 2 RCA pin: Power require
