ページ1に含まれる内容の要旨
3-865-678-11 (1)
FM/MW/LW
Cassette
Car Stereo
GB
Operating Instructions
ES
Manual de instrucciones
SE
Bruksanvisning
PT
Manual de instruções
For installation and connections, see the supplied installation/connections
manual.
Para obtener información sobre la instalación y las conexiones, consulte el manual
de instalación/conexiones suministrado.
Vi hänvisar till det medföljande häftet angående montering/anslutningar.
Para a instalação e as ligações, consulte o manual de instalação/ligações
forne
ページ2に含まれる内容の要旨
Welcome ! Thank you for purchasing this Sony Cassette When you operate this unit or a connected Player. This unit lets you enjoy a variety of optional CD unit with the CD TEXT function, features as well as a supplied rotary the CD TEXT information will appear in the 2 commander. display when you play a CD TEXT disc* . 1 * You can connect a CD changer, an MD changer, In addition to the cassette playback and radio a CD player, or an MD player. operations, you can expand your system by 2 1 * A CD T
ページ3に含まれる内容の要旨
Location of controls OPEN – PRESET + SOUND DISC MODE 6 D-BASS LIST PTY AF/TA 1 OFF 2 3 DSPL SOURCE SHIFT SET UP PLAY MODE ENTER SEEK / AMS OFF 1 2 3 4 5 6 XR-C6220R/C6210R Refer to the pages listed for details. 1 SEEK/AMS (seek/Automatic Music 9 AF/TA button 9, 10, 11, 12 Sensor/manual search) control 0 OPEN (front panel release) button 6, 8, 10, 13, 18, 21 4, 6, 24 2 MODE (*)button !Á Dial (volume/bass/treble/left-right/rear- During tape playback: front control) 5, 16, 19, 20 Playback directi
ページ4に含まれる内容の要旨
Attaching the front panel Place the hole a in the front panel onto the spindle b on the unit as illustrated, then push Getting Started the left side in. Resetting the unit a Before operating the unit for the first time or b after replacing the car battery, you must reset the unit. Remove the front panel and press the reset button with a pointed object, such as a ballpoint pen. Reset button µ Note Pressing the reset button will erase the clock setting and some memorized functions. Detaching the f
ページ5に含まれる内容の要旨
2 Press (SHIFT). Setting the clock The clock uses a 24-hour digital indication. The clock starts. Example: To set the clock to 10:08 1 Press (SHIFT), then press (2) (SET UP) 3 Press (SHIFT). repeatedly until “CLOCK” appears. After the clock setting is complete, the display returns to normal playback mode. Note If the POWER SELECT switch on the bottom of the 1 Press (4) (n). unit is set to the B position, turn the power on first, then set the clock. The hour indication flashes. 2 Set the hour. t
ページ6に含まれる内容の要旨
Fast-winding the tape During playback, push the SEEK/AMS Cassette Player control up or down and hold. Fast-forward Rewind Listening to a tape SEEK / AMS To start playback during fast-forwarding or 1 Press (OPEN) and insert a cassette. rewinding, press (MODE) (*). Playback starts automatically. 6 Locating a specific track — Automatic Music Sensor (AMS) During playback, push the SEEK/AMS control up or down and release for each track you want to skip. You can skip up to nine tracks at one time. 2 C
ページ7に含まれる内容の要旨
Playing a tape in various Radio modes You can play the tape in various modes: •REP (Repeat Play) repeats the current track. •METAL (Metal)* lets you play a metal or Memorizing stations CrO2 tape. •BL SKP (Blank Skip) skips blanks longer than automatically eight seconds. — Best Tuning Memory (BTM) •ATA (Automatic Tuner Activation) turns on the tuner automatically when fast-winding The unit selects the stations with the strongest the tape. signals and memorizes them in the order of their frequenci
ページ8に含まれる内容の要旨
If you cannot tune in a preset Memorizing only the station Push and release the SEEK/AMS control desired stations up or down to search for the station You can preset up to 18 FM stations (6 each for (automatic tuning). FM1, 2, and 3), up to 6 MW stations, and up to Scanning stops when the unit receives a 6 LW stations in the order of your choice. station. Push the SEEK/AMS control up or down repeatedly until the desired station is received. 1 Press (SOURCE) repeatedly to select the tuner. Note I
ページ9に含まれる内容の要旨
Changing the display item Each time you press (DSPL), the item changes as follows: RDS Station Name (Frequency) ÷ Clock After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. Overview of the RDS In the Motion Display mode, all the above items are scrolled in the display one by one in function order. Radio Data System (RDS) is a broadcasting Tip service that allows FM stations to send The Motion Display mode can be turned off. (See
ページ10に含まれる内容の要旨
Changing the display item Local link function Each time you press (AF/TA), the item changes (United Kingdom only) as follows: The Local Link function lets you select other Ó TA-ON Ó AF TA-ON* local stations in the area, even if they are not stored on your number buttons. AF-ON Ò AF TA-OFF Ò 1 Press a number button that has a local * Select this to turn on both the AF and TA functions. station stored on it. Notes 2 Within five seconds, press the number • When “NO AF” a
ページ11に含まれる内容の要旨
Presetting the volume of traffic Listening to traffic announcements You can preset the volume level of the traffic announcements announcements beforehand so you won’t miss the announcement. When a traffic The Traffic Announcement (TA) and Traffic announcement starts, the volume will be Programme (TP) data let you automatically automatically adjusted to the preset level. tune in an FM station that is broadcasting traffic announcements even if you are listening to other programme sources. 1 Select
ページ12に含まれる内容の要旨
Presetting the same setting for all preset stations Locating a station by 1 Select an FM band (page 7). programme type You can locate the station you want by 2 Press (AF/TA) repeatedly to select either selecting one of the programme types shown “AF-ON,” “TA-ON” or “AF TA-ON” (for below. both AF and TA functions). Note that selecting “AF TA-OFF” stores not Programme types Display only RDS stations, but also non-RDS stations. News NEWS Current Affairs AFFAIRS 3 Press (SHIFT), then press (3) (PLAY
ページ13に含まれる内容の要旨
1 Press (PTY/LIST) during FM reception until “PTY” appears. Setting the clock automatically The CT (Clock Time) data from the RDS transmission sets the clock automatically. The current programme type name appears if the station is transmitting the PTY data. “- - - - -” appears if the received station is 1 During radio reception, press (SHIFT), not an RDS station, or if the RDS data has then press (2) (SET UP) repeatedly until not been received. “CT” appears. 2 Press (PTY/LIST) repeatedly until t
ページ14に含まれる内容の要旨
LIST MODE SOUND Using the rotary Other Functions commander The rotary commander works by pressing You can also control the optional CD or MD buttons and/or rotating controls. units with the rotary commander. By pressing buttons (the SOURCE and MODE buttons) Labelling the rotary commander Depending on how you mount the rotary (SOURCE) commander, attach the appropriate label as shown in the illustration below. (MODE) Each time you press (SOURCE), the source changes as follows: TUNER n CD* n MD* n
ページ15に含まれる内容の要旨
Press (SOUND) to By rotating the control adjust the volume (the SEEK/AMS control) and sound menu. Press (LIST) to: • Display the memorized names. • Display the programme type. Changing the operative direction The operative direction of controls is factory- Rotate the control and release it to: set as shown below. •Locate the beginnings of tracks on the To increase tape. Rotate and hold the control, and release it to fast-wind the tape. To start playback while fast-winding the tape, press (MODE).
ページ16に含まれる内容の要旨
Adjusting the sound Changing the sound and characteristics display settings You can adjust the bass, treble, balance, and The following items can be set: fader. •CLOCK (page 5). You can store the bass and treble levels •CT (Clock Time) (page 13). independently for each source. •AMBER/GREEN – to change the illumination colour to amber or green. •BEEP – to turn the beep sound on or off. 1 Select the item you want to adjust by •RM (Rotary Commander) – to change the pressing (SOUND) repeatedly. oper
ページ17に含まれる内容の要旨
With Optional Equipment Boosting the bass sound CD/MD Unit — D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low This unit can control a maximum of ten frequency signal with a sharper curve than external CD/MD units in this configuration: conventional bass boost. CD unit – maximum of five You can hear the bass line more clearly even MD unit – maximum of five while the vocal volume remains the same. You Any combination up to ten will work. can emphasize and ad
ページ18に含まれる内容の要旨
After you select the desired item, the display Locating a specific track will automatically change to the Motion — Automatic Music Sensor (AMS) Display mode after a few seconds. In the Motion Display mode, all the above During playback, push the SEEK/AMS items are scrolled in the display one by one in control up or down and release for each order. track you want to skip. To locate Tip succeeding tracks The Motion Display mode can be turned off. (See “Changing the sound and display settings” on T
ページ19に含まれる内容の要旨
Playing tracks repeatedly Labelling a CD — Disc Memo — Repeat Play (For a CD unit with the custom file function) You can select: You can labell each disc with a personalized •REP-1 – to repeat a track. name. You can enter up to eight characters for •REP-2 – to repeat a disc. a disc. If you labell a CD, you can locate the disc by name and select specific tracks for playback (page 21). 1 During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “REP” appears. 1 Play the CD and pr
ページ20に含まれる内容の要旨
Displaying the disc memo name Erasing the disc memo Press (DSPL) during CD or CD TEXT disc 1 Press (SOURCE) repeatedly to select CD. playback. 2 Press (MODE) repeatedly to select the CD unit. 3 Press (PTY/LIST) for two seconds. Each time you press (DSPL) during CD or CD TEXT playback, the item changes as follows: 4 Press (DSPL) for two seconds. $ 5 Rotate the dial to select the name you Elapsed playback time want to erase. $ Disc memo name 6 Press (5) (ENTER) for two seconds. The name is erased.
