ページ1に含まれる内容の要旨
Video Cassette Recorder
W-808
W-804
OWNER’S MANUAL
REV FF
PLAY
POWER EJECT
PROG.TV STOP
REC PAUSE/STILL
This publication is printed
on recycled paper
70971856
ページ2に含まれる内容の要旨
SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsu- lated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the applian
ページ3に含まれる内容の要旨
INTRODUCTION IMPORTANT PRECAUTIONS Save Original Packing Materials The original shipping carton and packing materials will come in handy if you ever have to ship your VCR. For maximum protection, repack the set as it was originally packed at the factory. Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will mar the finish. Moisture Condensation Never operate this unit immedia
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does
ページ5に含まれる内容の要旨
INTRODUCTION 6. Water and Moisture Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and the like. 7. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 8. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against the
ページ6に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 12. Lightning For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 13. Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fir
ページ7に含まれる内容の要旨
INTRODUCTION Contents INTRODUCTION Variable Speed Playback .................. 23 Provides important notes and general • Picture Search explanation of the VCR, including names of the • Still Picture buttons, jacks, etc. • Slow-motion Picture • Frame Advance SAFETY PRECAUTIONS .................... 2 • Double Speed Playback IMPORTANT PRECAUTIONS .............. 3 • Jog Dial Operation IMPORTANT SAFETY • Shuttle Dial Operation INSTRUCTIONS ................................... 4 Useful Functions in Tape
ページ8に含まれる内容の要旨
INTRODUCTION Identification of Controls See the page in for details. This manual shows the names of buttons in italics. Front Panel CHANNEL 27 PLAY 21 EJECT 20 Cassette compartment 20 STOP POWER 21 15 REV FWD ( ) PLAY POWER c EJECT STOP SHUTTLE CHANNEL 24 LINE IN 2 REC PAUSE/STILL JOG 24 LINE IN 2 VIDEO L-MONO-AUDIO-RS-VIDEO VIDEO jack PAUSE/STILL Remote sensor 23 10 LINE IN 2 AUDIO REC 27 (L/MONO, R) jacks VCR display 9 LINE IN 2 S-VIDEO jack Remote Control TV/VOL 46 CH/TRK TV/VOL VCR To opera
ページ9に含まれる内容の要旨
INTRODUCTION VCR Display VCR indicator Timer recording indicator Cassette indicator REMAIN indicator S-VHS indicator OFF indicator POWER indicator S-VHS ET indicator AM PM POWER REMAIN L Hi-Fi (L/R) indicators SLP OFF R L: Left channel VCR R:Right channel REC TIMER DT CH HM S OFF: Normal track Multifunctional indicator REC (Recording) DT (Digital Auto Tracking) indicator indicator Channel indicator Tape speed indicator Tape running direction/speed indicator (SP/SLP) Rear Panel LINE IN 1 AUDIO (R
ページ10に含まれる内容の要旨
PREPARATION How to Use the Remote Control This section explains how to get ready for remote control operation. Whenever you operate the VCR, press VCR to set the remote control operating the VCR. Setting up the Remote Control Open the battery compartment on the 1 front of the Remote Control by pressing on the 1 centre of the slide cover and pull off in one motion in the direction of the arrow. 2 Install 2 batteries (“AAA” size) following 2 the polarity diagrams. Close the battery compartment lid
ページ11に含まれる内容の要旨
PREPARATION PREPARATION Connections Before you use this VCR, it is necessary to connect it to your TV. Several ways of connecting are available depending on your use of TV or cable box. Select one which is applicable to your equipment. Antenna/VCR/TV Connection Disconnect the antenna cable from your TV and connect it to the RF IN terminal on the 1 VCR. Connect the RF OUT terminal to the TV. 2 VHF/UHF combination VHF antenna UHF antenna antenna only only 1 IN (FROM ANT.) VHF/UHF 2 OUT (TO TV) S
ページ12に含まれる内容の要旨
Connections (continued) S-VIDEO Connection The S-VIDEO jack is also available to connect to your TV. When connected your TV using the S-VIDEO OUT jack To watch video pictures, set the video input mode on your TV. For the video input mode, refer to the manual of your TV. S-Video Cable (supplied) Audio/Video Cable (supplied) Cable Connection Choose one of the below according to your usage of the cable box. This set-up will enable you to: – record an unscrambled channel. – watch an unscrambled cha
ページ13に含まれる内容の要旨
PREPARATION This set-up will enable you to: – watch an unscrambled or scrambled channel while recording it. – record any channels through the cable box. Cable Box You will need to: • set TV channel 3 or 4 to receive video signals. IN OUT (See page 11.) • set VCR channel to the output channel of the cable box, and select a desired cable channel on the cable box. • while the VCR is turned off or the “VCR” indicator is not lit in the VCR display, set TV channel to the output channel of the cable bo
ページ14に含まれる内容の要旨
PREPARATION Auto Set Up The Auto Set Up function automatically sets the tuner channels and clock when power is first connected to the VCR. Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11). • Press I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display. • Press VCR to set the remote control operating the VCR. Auto Set Up Connect the antenna cable to the VCR (see pa
ページ15に含まれる内容の要旨
PREPARATION PREPARATION Initial Settings Using On-screen Display Language selection must be set first when the VCR is first plugged in, or after it encounters a power failure. You can also easily make necessary settings using the on-screen displays. Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11). • Press VCR to set the remote control operating the VCR. Setting the Language Press POWER to turn on the VC
ページ16に含まれる内容の要旨
Initial Settings Using On-Screen Display (continued) Optional settings on the SET UP screen 2 Page 28 SET UP PRESET PROGRAM MORE.. Page 29 S-VHS EC R OF n OF S-VHS ET OF n OF PLAY DnR F I nE SOFT With “DnR On” selected (see page 21), move down here to obtain a RF DnR OF n OF “FInE” or “SOFT” playback picture. (For W-808 only) S I nPD UT nROF n OF Setting to ““FInE” will give a normal picture with DNR effect. PROG ED n : Setting to “SOFT” will give a softer picture. With “On” set, the reception
ページ17に含まれる内容の要旨
PREPARATION Setting the Clock Press ENTER to start the “AUTO” clock 8 set feature. Example: To set the clock to 2:30 p.m. on After a while, the VCR automatically updates August 25 (summer time) 2000. the clock using the data broadcast by the local TV stations. Press PROG.. 1 The following screen will appear on TV The MENU screen appears on the TV. depending on the broadcast at your location. Select “PRESET” using FF or REW, and 2 PROGRAM SET UP PRESET press ENTER. CL OCK SE T SUMMERTI ME SET U
ページ18に含まれる内容の要旨
PREPARATION Storing Channels on the VCR This section is required if you receive only normal TV or unscrambled cable channels, or use a cable box between your TV and the VCR. Incoming Antenna/Cable (CATV) Signals The VCR scans through all receivable TV and CATV channels and stores only the active ones in your area into the memory. Once the storing is finished, you can select a desired channel using CH/TRK. Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mo
ページ19に含まれる内容の要旨
PREPARATION 3) Enter a channel number of 1 to 125 using Adding or erasing channels number buttons. Adding channels For more than 100 number, first press 100. If a desired channel cannot be scanned For CATV channels, refer to the chart below. automatically because of a weak signal, it can be (For other orders, check with your cable added to the memory. company.) Erasing channels 4) Repeat steps 2) and 3) to add or erase You can erase a stored channel from the memory channels as necessary. if it i
ページ20に含まれる内容の要旨
PREPARATION Video Cassette Use Video Cassette Use Loading a cassette Push the cassette into the cassette compartment with the window side facing up and the label side towards the front. The VCR is automatically turned on. The indicator will appear in the VCR display. Ejecting a cassette Press EJECT. The cassette is ejected from the cassette compartment. Warning Do not insert your hands or any foreign objects into the compartment. This may result in injury or damage. Take special
