ページ1に含まれる内容の要旨
DVD PLAYER &
VIDEO CASSETTE RECORDER
HR-XVC29SUM
INSTRUCTIONS
LPT1041-001A
C Cover_EN_HR-XVC29SUM.indd 3 over_EN_HR-XVC29SUM.indd 3 05.5.14 8:19:40 AM 05.5.14 8:19:40 AM
Operations on
Operations on
Additional Information Advanced Operations Preparation Introduction
DVD Deck
VCR Deck
ページ2に含まれる内容の要旨
Enjoy Playback of DVD & Video Cassette Enjoy Playback of DVD & Video Cassette All in This Combo Unit All in This Combo Unit Region code of DVD VIDEO Supplied accessories This unit can play back DVD VIDEO discs whose If anything is missing, consult your dealer immediately. region code numbers include “4.” RF cable Examples of playable DVD VIDEO discs: Remote “AA” battery x 2 Conversion plug 1 2 123 ALL 45 4 456 3 4 The unit’s region code is printed on the rear of the unit. 2 02-03_EN_H
ページ3に含まれる内容の要旨
Introduction SAFETY FIRST ........................................................... 4 Buttons, Connectors, and Indicators ............................ 7 Preparation Connections .............................................................. 9 Basic Connections ................................................... 9 Component Video Connection ................................ 10 Initial Settings .......................................................... 11 Plug&Play Set .......................
ページ4に含まれる内容の要旨
Dear Customer, IMPORTANT Thank you for purchasing the JVC DVD player & VHS 7 Please read the various precautions on page 4 and video cassette recorder. Before use, please read the 5 before installing or operating the unit. safety information and precautions to ensure safe use 7 It may be unlawful to record or play back of your new unit. copyrighted material without the consent of the copyright owner. CAUTION SAFETY FIRST 7 When you are not using the unit for a long period of time, it is
ページ5に含まれる内容の要旨
MOISTURE CONDENSATION Moisture in the air will condense on the unit when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form in the surface of a glass fi lled with cold liquid. Moisture condensation on the head drum Manufactured under license from Dolby will cause damage to the tape. In conditions where Laboratories. “Dolby” and the double-D symbol are condensation may occur, keep the unit turned on for trademarks of Dolby Labo
ページ6に含まれる内容の要旨
Usable cassette Playable discs Full-Size VHS DVD VIDEO, Audio CD, Video CD, SVCD (8 cm/12 cm T-30 (ST-30**) disc) T-60 (ST-60**) T-90 (ST-90**) T-120 (ST-120**) DVD-R/-RW written in the DVD VIDEO mode T-160 (ST-160**) CD-R/RW written in the SVCD, Video CD or Audio CD T-210 (ST-210**) format Compact VHS* CD-R/RW written in MP3/JPEG in accordance with the TC-20 (ST-C20**) “ISO 9660” format TC-30 (ST-C30**) Supported Digital audio formats: TC-40 (ST-C40**) Linear PCM, Dolby Digital, DTS
ページ7に含まれる内容の要旨
Buttons, Connectors, and Indicators Front View 0 OPEN/CLOSE (Disc tray) POWER Cassette loading slot VCR/DVD 7 STOP Disc tray 3 PLAY Remote sensor ¶ REC FF ¡ CH +/– 0 EJECT VIDEO/AUDIO input connectors 1 REW PROGRESSIVE SCAN (Cassette) Front Display Panel Operation Mode Indicator VHS Indicator Multi-information window* DVD Indicator Satellite Auto Recording VCR Indicator Progressive Mode Indicator Indicator “Timer” Indicator * You can change the information by pressing DISPLAY on the Remote as
ページ8に含まれる内容の要旨
1 Power Button (POWER) Remote 2 TV Power Button (TV POWER) 3 TV/VCR/DVD switch 4 DVD Button 1 5 VCR Button 2 6 Number Buttons 3 7 Daily Button (DAILY) 8 Cancel Button (CANCEL), Reset Button (C.RESET) 9 Auxiliary Button (AUX) 4 d p Start Time Button (START +/–), Repeat Button (REPEAT), Zooming Button (ZOOM) 5 f q Stop Time Button (STOP +/–), On-Screen Button (ON SCREEN) 6 w Programing Button (PROG) g e Top Menu Button (TOP MENU), SP/EP Button 7 r Program Check Button (PROG. CHECK), Return h Bu
ページ9に含まれる内容の要旨
~ Place the unit on a stable, horizontal surface. Connections Ÿ Connect the unit to TV. RF Connection Basic Connections 1 Disconnect the TV antenna from the TV. 2 Connect the TV antenna cable to the VHF/UHF Antenna or Cable IN connector on the rear panel of the unit. 3 Connect the supplied RF cable between the VHF/UHF OUT connector on the rear panel of Coaxial cable the unit and the TV’s antenna terminal. AV Connection Flat feeder 1 Connect the antenna, unit and TV as per “RF Connection.” M
ページ10に含まれる内容の要旨
Component Video Connection ATTENTION Be sure to connect the unit’s VIDEO OUTPUT (DVD/ (For high-quality DVD pictures) VCR) connector to the TV’s VIDEO input connector. Antenna or Cable ~ Place the unit on a stable, horizontal surface. Ÿ Connect the unit to TV. Coaxial cable 1 Connect the antenna, unit and TV as per “Basic Connections.” ( ☞ pg. 9) 2 Connect the unit’s COMPONENT VIDEO OUTPUT Flat feeder connector to the TV’s component video input Matching transformer connector. (not supplied)
ページ11に含まれる内容の要旨
Scan Mode Set (DVD deck only) Initial Settings This unit supports the progressive scan system as well as the conventional interlaced scan system. Plug&Play Set If your TV equipped with component video Plug&Play setting starts automatically when you connectors supports the progressive video input, press POWER for the first time to turn on the unit. you can enjoy a high quality picture by setting the progressive scan mode to active. Turn on the TV and select the VCR channel (or Refer als
ページ12に含まれる内容の要旨
Initial Settings (continued) Language Set You can change the language settings manually as required. Monitor Set (DVD deck) You can select the monitor type depending the TV used Turn on the TV and select the VCR channel (or AV when you playback DVD VIDEO disc recorded for wide- mode). screen TVs. Slide the TV/VCR/DVD switch on the Remote to the right. Turn on the TV and select the VCR channel (or AV mode). Slide the TV/VCR/DVD switch on the Remote to the On-screen Language Set (VCR
ページ13に含まれる内容の要旨
On-screen Language Set (DVD deck) Menu/Audio/Subtitle Language Set This DVD deck offers you the choice to view on- (DVD deck only) screen messages in 3 different languages. Some DVD discs contain the DVD menu display, ~ Select the DVD deck. audio, subtitle in the multiple language. With these Press DVD on the Remote so that the DVD indicator discs, you can set the default language. lights up on the front display panel. ~ Select the DVD deck. Ÿ Access the DVD Set LANGUAGE Press DVD on the Re
ページ14に含まれる内容の要旨
Initial Settings (continued) @ Set the time. Press %fi to set the hour, then 5 press ENTER. Clock Set Press and hold %fi to Perform clock setting only if the clock has not been set change the time by 30 correctly by the Plug&Play setting. minutes. Turn on the TV and select the VCR channel (or AV ¤ Set the date. mode). Press %fi to set the date, then press ENTER. Slide the TV/VCR/DVD switch on the Remote to the Press and hold %fi to change the date by 15 days. right. # Set the year. Pre
ページ15に含まれる内容の要旨
Manual Channel Set Tuner Set You can add the channels you want or delete the Turn on the TV and select the VCR channel (or channels you do not want manually. AV mode). Slide the TV/VCR/DVD switch on the Remote to ~ Select the VCR deck. the right. Press VCR on the Remote so that the VHS indicator lights up on the front display panel. Auto Channel Set Ÿ Access the Main Menu screen, then select the Perform Auto Channel Set only if channels have not Tuner Set. been set correctly by the Pl
ページ16に含まれる内容の要旨
Variable Speed Search (including slow-motion) Playback on VCR Deck Press 1 REW or FF ¡ repeatedly. Press 3 PLAY to resume normal playback. Each time you press 1 REW or FF ¡, the playback speed Basic Playback changes. To decrease the speed during picture search, press the opposite direction button repeatedly. Turn on the TV and select the VCR channel (or AV Reverse Forward mode). Slide the TV/VCR/DVD switch on the Remote to the Reverse search Slow Normal Forward search right. 3 step
ページ17に含まれる内容の要旨
On-Screen Display (VCR deck) If you press ON SCREEN on the Remote when “SUPERIMPOSE” is set to “ON” ( ☞ pg. 32), various operational indicators appear on the TV screen. Press ON SCREEN again to clear the display. 1 7 2 8 3 9 4 p 5 q 6 w 1 Channel Position Number/Auxiliary Input Indicator 6 Audio Mode Display (F-1) 7 Opening Mode Indicators 2 Day/Clock Display 8 Tape Speed (SP/EP) 3 Stereo Program Indicator 9 “Cassette Loaded” Mark 4 SAP Indicator p Index number 5 Tape Position Indicator q Tape
ページ18に含まれる内容の要旨
Playback on VCR Deck (continued) Instant ReView Simply by pressing a single button, the unit power comes on, rewinds, and begins playback of the last Playback Features timer-recorded program. If you have several programs recorded, you can easily access any of them. Skip Search NOTE: During playback, press (Skip Search) 1 to 6 times to Before starting, make sure that the unit is off and that the skip over unwanted sections. Timer mode is disengaged. Each press initiates a 30-second period o
ページ19に含まれる内容の要旨
Repeat Playback Selecting Soundtrack Your recorder is capable of recording three During playback, press and hold 3 PLAY for more soundtracks (HIFI L, HIFI R and NORM) and plays than 5 seconds. “3” on the front display panel starts back the one you select. blinking slowly. To stop playback, press 7 STOP. Pressing A.MONITOR changes the soundtrack as NOTE: follows: Pressing 3 PLAY, 1 REW, FF ¡ or 8 PAUSE also stops Repeat Playback. H I-F I: Hi-Fi sound is played back H I-F I L: Sound on the l
ページ20に含まれる内容の要旨
Recording Features Recording Watching one programme while recording Basic Recording another Turn on the TV and select the VCR channel (or AV mode). If your recorder is connected to the TV via the AV Slide the TV/VCR/DVD switch on the Remote to the connection, press TV/VCR. The recorder’s VCR right. indicator and the TV broadcast being recorded disappear. Once recording is in progress, all you need to do is to set the channel controls on the TV for the ~ Load a cassette. station you wi
