ページ1に含まれる内容の要旨
HR-J797AM.fm Page 1 Thursday, April 11, 2002 2:44 PM
VIDEO CASSETTE RECORDER
HR-J797AM
HR-J791AM
INSTRUCTIONS
LPT0687-001A Printed in Malaysia
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD. 0402 MNVfPJfPJ
Safety Precautions
The STANDBY/ON 1 button does not completely shut off
The rating plate and the safety caution are on the rear of the unit.
mains power from the unit, but switches operating current on
WARNING: DANGEROUS VOLTAGE INSIDE
and off. “`“ shows electrical power standby and “ ! “
ページ2に含まれる内容の要旨
HR-J797AM.fm Page 2 Thursday, April 11, 2002 2:44 PM 3. DO NOT place heavy objects on the recorder or remote control. Buttons, Connectors 4. DO NOT place anything which might spill on top of the recorder or remote control. (If water or liquid is allowed to enter this equipment, fire or and Indicators electric shock may be caused.) 5. DO NOT expose the apparatus to dripping or splashing. 6. DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any containers fill
ページ3に含まれる内容の要旨
HR-J797AM.fm Page 3 Thursday, April 11, 2002 2:44 PM – Buttons, Connectors and Indicators – Remote control Basic Connections A Check contents Make sure the package contains all of the accessories listed in “Specifications”. B Situate recorder Place the recorder on a stable, horizontal surface. Number keys C Connect recorder to TV TV aerial cable Mains power cord Back of recorder * Not function with this recorder. Mains outlet On-screen display To AV input connectors When “O.S.D.” is set to
ページ4に含まれる内容の要旨
HR-J797AM.fm Page 4 Thursday, April 11, 2002 2:44 PM D Close the battery cover until it clicks in place. Initial Settings Video Channel Set Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. Before performing the following steps, make sure the recorder’s power is off and there is no cassette inserted in the recorder. If you have connected the video recorder to your TV via the provided RF cable
ページ5に含まれる内容の要旨
HR-J797AM.fm Page 5 Thursday, April 11, 2002 2:44 PM – Initial Settings – Language Setting Playback A Access Main Menu screen, then MAIN MENU FUNCTION SET Initial Set screen TUNER SET INITIAL SET Basic Playback Press MENU on the remote control. Press rt to place the pointer next to “INITIAL SET”, then press OK or e. [ / ] Turn on the TV and select the video channel or AV mode. [MENU] : EXIT B Access Language Select screen A Load a cassette Press rt to place the pointer next to “L
ページ6に含まれる内容の要旨
HR-J797AM.fm Page 6 Thursday, April 11, 2002 2:44 PM – Playback – Press REW (3 ), then press 1 within 2 seconds. ● For Automatic Timer Standby Press REW (3 ), then press # within 2 seconds. NOTE: It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed. Reverse Forward Playing back tape repeatedly (100 times) — Repeat Play Reverse Reverse Slow Normal Forward During playback, press and hold PLAY (4) for more than search play motion pla
ページ7に含まれる内容の要旨
HR-J797AM.fm Page 7 Thursday, April 11, 2002 2:44 PM ● The programme selected with the TV’s channel controls appears Recording on the TV screen while the one selected with the PR +/– buttons is recorded on the tape. Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record Receiving Stereo And Bilingual Programmes safety tab. To record on it later, cover Your recorder is equipped with a Sound-Multiplex decoder (A2) the hole with adhesive tap
ページ8に含まれる内容の要旨
HR-J797AM.fm Page 8 Thursday, April 11, 2002 2:44 PM ™ ™ G-CODE /SHOWVIEW Timer Timer Recording Up to 8 timer recording programs can be made using G-CODE/ Programing SHOWVIEW timer programing or Express timer programing method as far as a year in advance. Remember, the clock must be set The G-CODE numbers are the numbers before you can program the timer. next to the program in most TV listing. ● Remember, the clock must be set NOTES: before you can program the timer. ● If all the 8program
ページ9に含まれる内容の要旨
HR-J797AM.fm Page 9 Thursday, April 11, 2002 2:44 PM – Timer Recording – Express Timer Programing Checking, cancelling or changing ● Remember, the clock must be set before you can program the program settings timer. ● Load a cassette with the record safety tab intact. The recorder A Disengage timer turns on, and the counter is reset, automatically. Press #, then press 1. ● Select the appropriate colour system with “PAL/MESECAM” and ● When “AUTO TIMER” is set to “ON”, you do not have to pr
ページ10に含まれる内容の要旨
HR-J797AM.fm Page 10 Thursday, April 11, 2002 2:44 PM ● If the overlap is not yet solved, the conflicting programs will be PICTURE CONTROL — AUTO(NORM) / EDIT / SOFT / SHARP shown on the Program check screen. Repeat the above steps This function helps you to adjust the playback picture quality again. according to your preference. AUTO (NORM): Normally select this. Picture quality is adjusted Other Functions automatically. When “B.E.S.T.” is “OFF”, “NORM” will appear instead of “AUTO”.
ページ11に含まれる内容の要旨
HR-J797AM.fm Page 11 Thursday, April 11, 2002 2:44 PM – Other Functions – TV Brand Setting AUTO SP]LP TIMER — ON / OFF When this function is set to “ON”, the recorder automatically A Turn on TV switches to LP mode to allow complete recording if there is not Turn on the TV using the Power button on the TV or its remote enough tape to record the entire program while timer-recording in control. SP mode. For Example, Recording a PAL-broadcast programme of 210 B Set TV brand code minutes in
ページ12に含まれる内容の要旨
HR-J797AM.fm Page 12 Thursday, April 11, 2002 2:44 PM – Other Functions – CABLE BOX OR SATELLITE CODE Editing RECEIVER BRAND You can use your recorder as the playback or recording deck. You JVC 72, 73, AMSTRAD 60, 61, 62, 63, 92 can use a camcorder as the source player and your recorder as the BT 72 recording deck. Refer also to the other components’ instruction CANAL+ 81 manuals for connection and its operations. CANAL SATELLITE 81 D-box 85 A Make connections ECHOSTAR 51, 78, 79, 80, 82
ページ13に含まれる内容の要旨
HR-J797AM.fm Page 13 Thursday, April 11, 2002 2:44 PM Information on Multi-System Compatibility Off-Air Recording The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K and NTSC* broadcasts. Recorded tape TV system HR-J797AM/HR-J791AM Multi-system tuner (B/G, I, D/K, M*) * HR-J797AM only NOTE: This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N). Playback This recorder can play back all 3 types of recorded tape. HR-J797AM/HR-J791AM Re
ページ14に含まれる内容の要旨
HR-J797AM.fm Page 14 Thursday, April 11, 2002 2:44 PM – Information on Multi-System Compatibility – Tape-To-Tape Editing There are 4 different types of recorded tape, depending on the signal recorded. Recorded tape HR-J797AM/HR-J791AM Playback equipment Dubbed tape Recording circuit IMPORTANT ● If no sound accompanies the picture or the audio sounds Tuner Setting unnatural on some channels that have been stored by Auto IMPORTANT Channel Set, the TV system setting for those channels may be
ページ15に含まれる内容の要旨
HR-J797AM.fm Page 15 Thursday, April 11, 2002 2:44 PM – Tuner Setting – E Set desired station D Select position (e.g. 09) CH FRQ SYS CH FRQ SYS STORE 01 150 BG 07 229 BG 02 165 BG 08 237 BG The screen to the right appears when a Press Number keys to input “0” and “9”. CONTINUE 03 355 BG 09 195 BG station is detected. ● The two selected channels will be 04 205 BG 10 365 BG 05 213 BG 11 374 BG If you do not want to store the detected swapped. 06 221 BG 12 384 BG [ ] : CANCEL station... ● To
ページ16に含まれる内容の要旨
HR-J797AM.fm Page 16 Tuesday, April 16, 2002 12:22 PM TUNER/TIMER Specifications TV channel storage : 99 positions (+AUX position) capacity Tuning system : Frequency synthesized tuner GENERAL Channel coverage Power requirement VHF : (Low) 42 MHz – 175 MHz Rating : AC 110 V – 240 Vd, 50 Hz/60 Hz (High) 175 MHz – 470 MHz Operating : AC 90 V – 260 Vd, 50 Hz/60 Hz UHF : 470 MHz – 870 MHz Power consumption : 16 W Aerial output : UHF channels (Adjustable E28 – E60) Temperature Memory backup time
