ページ1に含まれる内容の要旨
TABLE OF CONTENTS
HITACHI
Video Deck VHS
VT-M292A
Owner's Manual
Your Complete Guide
to Videocassette Viewing
and Recording
Using these quality features:
Automatic tape head cleaning
Up to 8 delayed recording programs
Auto Tracking for improved picture in playback
Frequency synthesizer quartz tuner
Remote control for use with your VCR and TV
On-screen programming guide
VCR Plus+* for easy timed recording
* VCR Plus+ and PlusCode
ページ2に含まれる内容の要旨
TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS............................................................................................................................ 2 FOR YOUR SAFETY................................................................................................................................. 4 Read This First ............................................................................................................................................ 6 IMPORTANT
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Basic Recording Steps ...................................................................................................................... 32 Recording Tips.................................................................................................................................... 32 Using the Instant Recording Timer (IRT)........................................................................................ 33 Setting the VCR to Record Later .....................
ページ4に含まれる内容の要旨
FOR YOUR SAFETY FOR YOUR SAFETY POWER SUPPLY: AC 120V, 60 Hz ONLY. The POWER switch turns the VCR on and off, leaving the clock/timer unaffected. If the unit is to be left unattended for a long period, it is recommended that the unit be completely switched off and unplugged. Illustrated below is the label on the back of your unit. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is
ページ5に含まれる内容の要旨
FOR YOUR SAFETY CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Caution to user: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. "Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable
ページ6に含まれる内容の要旨
Read This First Read This First Thank you for buying a Hitachi product. You've chosen the best VCR for you, and we want to help you make the most of your purchase. Please take time to become familiar with this manual and how it is set up. Keep it handy for future reference, too. To guide you, we've concluded: "Must read" sections containing important cautions for your family's safety as well as the basic facts you need to use the VCR. These sections are highlighted like th
ページ7に含まれる内容の要旨
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of a Video Cassette Recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy pla
ページ8に含まれる内容の要旨
IMPORTANT SAFEGUARDS a risk of fire or electric shock. Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords, damaged or cracked wire insulation and broken plugs. They may result in shock or fire hazard. Periodically examine the cord and have it replaced by your service technician if appearance indicates damage or deteriorated insulation. 7 Power Cord Protection -- Power supply cords should be routed so that they are not likely to be walked o
ページ9に含まれる内容の要旨
IMPORTANT SAFEGUARDS 11 Accessories -- Do not place this video product on an unstable card, stand, tripod, bracket or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the video product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufac
ページ10に含まれる内容の要旨
IMPORTANT SAFEGUARDS 16 Lightning -- For added protection for this video product during a lightning storm, or when it its left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable-system. This will prevent damage to the video product due to lightning and power-line surges. SERVICE 17 Servicing -- Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerou
ページ11に含まれる内容の要旨
IMPORTANT SAFEGUARDS need for service. 19 Replacement Parts -- When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the video product manufacturer can prevent fire, electric shock or other hazards 20 Safety Check -- Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks recommended by
ページ12に含まれる内容の要旨
Getting Started Getting Started Relax. Using a VCR is very straightforward. This sections explains how to hookup the VCR, quick tour of the controls, set up for first-time operation using on-screen menus, and videocassette tapes. Enjoy getting to know all about your Hitachi VCR. Let's get started. Simple Hookups 1 Decide Where to Put Your VCR Be sure your chosen location allows for proper ventilation, stability, and protection from heat and moisture (see Important Safeg
ページ13に含まれる内容の要旨
Getting Started We will guide you through the process. But first, turn the TV and the VCR around so you are looking at their backs. Note the various input and output receptacles, their shapes, and how they are labeled. Then read through the rest of this hookup section before proceeding to an actual hookup. DO NOT TURN ON THE POWER YET. FOR YOUR SAFETY, LEAVE YOUR TV AND VCR UNPLUGGED WHILE HOOKING THEM UP. 3 Hook up the Audio/Video Signal If your TV is a fairly recent model, you prob
ページ14に含まれる内容の要旨
Getting Started record off TV channels. 4 Hook up the RF Signal Look at the back of your TV for a connector that looks like one of these, and follow the corresponding hookup option. If you have any sort of cable box, see the hookup 1 options in Advanced Operations (page 42). Cable box hookup info begins on page 50. Simple Antenna/Cable 75 Ohm Hookup This is an easy hookup that you can use if your cable or antenna has a 75 ohm round wire connector. You will need the 75 ohm cable suppl
ページ15に含まれる内容の要旨
Getting Started Capabilities: With this hookup, you should now be able to perform all the basic functions provided by this equipment. External or Internal 300 Ohm Antenna If you have either an external or internal (rabbit ears) antenna rather than cable, you may have 300 ohm connectors like these. In this case, you will need special adapters to make the 75 ohm round wire connection shown below. (You may already have one on your TV.) 1. Remove the antenna line from the back of your
ページ16に含まれる内容の要旨
Getting Started Separate UHF and VHF antenna wires, both 300 ohm flat wire 300 ohm flat UHF and 75 ohm round VHF If you have "rabbit ears" (an antenna on top of your TV), you will need an additional adapter and 75 ohm extension to make your leads reach from the antenna to the VCR. This connection will work only if you have a strong, clear picture on the TV, indicating a strong signal. Connect the antenna to the adapter, and use the cable extension to go from the adapter to the VC
ページ17に含まれる内容の要旨
Getting Started 5 Attach the TV and VCR to the Power Supply Plug in the TV and VCR power cords to the wall outlet or an appropriate extension cord or surge protector. See Important Safeguards for further precautions (page 6). 6 Install Batteries in the Remote Control The remote control requires two fresh "AA" batteries. On the back of the remote, a plastic cover slides off in the direction shown by the arrow. Remove this cover and install the batteries, matching the plus end of each b
ページ18に含まれる内容の要旨
Getting Started (Controls) Getting Started (Controls) Quick Tour of the Controls Study these pictures carefully to learn about the buttons and controls that you'll need for everyday operation. Various controls are explained throughout this manual as they are needed, but now is a good time to get familiar with their locations. Most of the time, you'll be directing the VCR from the remote control, but there are some controls on the VCR that will come in handy too. When you're fam
ページ19に含まれる内容の要旨
Getting Started (Controls) GUIDE Brings up an on-screen setup and programming guide, the Easy Guide System. DISPLAY Used in on-screen programming and indexing. CLEAR Used in on-screen programming and indexing. VCR/TV Switches between viewing through the VCR and not viewing through the VCR. VOLUME Increase or decrease the audio volume. MUTE Turns off the audio until you press MUTE again. REW Rewinds the videotape. PLAY Starts playing a loaded cassette. REC Starts recording on th
ページ20に含まれる内容の要旨
Getting Started (Controls) on the coffee table, your 2-year-old child, the dog. Hold the remote so that it points at the VCR with nothing in the way. If You Just Want to Watch TV For normal TV viewing, you do not need to disconnect the VCR. When the TV and VCR are already on, press POWER on the remote control. The VCR will shut off, but the TV will stay on. If you are recording on the VCR but want to watch a different channel on the TV, press the VCR/TV button to switch back and forth
