ページ1に含まれる内容の要旨
VIDEO CASSETTE PLAYER
DC OPERATION W/SPECIALIZED TAPE MECHANISM
DLC COATED VIDEO HEAD
BACKLIGHTING OF FUNCTION BUTTONS
AVP-7000 OPERATING INSTRUCTIONS
AUDIOVDX ~peCI.WZED APPUCAT1ONS. LLC.
ページ2に含まれる内容の要旨
RECOMMENDED GUIDEUNES FOR THE USE OF A VIDEO MONITORf1V IN A MOTOR VEHICLE .A VIDEO MONITOR!TV is designed for rear passenger viewing only. This product may only be installed in the rear seat compartment of the vehicle, out of the driver's view. .Installation in any other area of the vehicle, including anywhere within the driver's view, is illegal in most states, provinces and countries and may lead to driver distraction resulting in an accident, injury and/or death. If you are unsure of regulat
ページ3に含まれる内容の要旨
CONTENTS SPECIAL OPERATIONS. .. 12 3 IMPORTANT SAFEGUARDS. IMPORTANT NOTES . 13 6 IDENTIFICATION 17 7 CONNECTION. FEATURES .20 BEFORE CALLING SERVICE PERSONNEL 8 MOISTURE CONDENSATION .21 9 TROUBLE SHOOTING VIDEO HEAD CLEANING BASIC OPERATIONS . .23 10 SPECIFICATION
ページ4に含まれる内容の要旨
Thank you for purchasing AUDIOVOX VCP, developed to provide advanced features and functions for high quality performance To obtain the best results and to avoid malfunction, please read the following instructions carefully before using. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol. within an equilateral triangle. is intended to alert the user to the presence of uninsulated "dangerous voltage" within the pr
ページ5に含まれる内容の要旨
NOTE: Note to CATV system Installer: This equipment has been tested and found to comply with the This reminder is provided to call the CATV system installer's limit for a Class Bdigital device, pursuant to Part 15 of the FCC attention to Article 820-40 of the NEC that provides guidelines for Rules. These limits are designed to provide reasonable proper grounding and, in particular, specifies that the cable protection against harmful interference in a residential installa- ground shall be connect
ページ6に含まれる内容の要旨
USE Power Sources- This set should be ObJect and Liquid Entry- Never push operated only from the type of power obJects of any kind into the set through source indicated on the marking label. If openings as they may touch dangerous you are not sure of the type of electrical voltage points or short out parts Ihat power supplied at your home. consult could result in a fire or electric shock. your dealer or local power company. For Never spill Iquid of any kind on the set. those sets designed to ope
ページ7に含まれる内容の要旨
Cleaning- Unplug the set from the wall -Never place the set in a confined space Portable Cart Warning. VGP and cart outlet before cleaning it. Do not use liquid such as a bookcase, or txJlit in cabinet, combination should be moved with care. cleaners or aerosol cleaners. Use a cloth unless proper ventilation is provIded. Quick stops, excessive force, and uneven lightly dampened with water tor cleaning surfaces may cause the VGP and cart combination to overturn. the exterior of the set. 4
ページ8に含まれる内容の要旨
SERVICE Damage Requiring Service-Unplug the set from the -If the set has been subject to excessive shock by being Servicing- Do not attempt to service the set yourself as wall outlet and refer servicing to qualified service dropped. or the cabinet has been damaged. opening or removing covers may expose you to danger- personnel under the following conditions ous voltage or other hazards. Refer all sevicing to qualified service personnel. -When the power cord or plug is damaged or frayed. L7 FRAYE
ページ9に含まれる内容の要旨
.Note that main voltage is supplied to the unit whenever the main plug is connected to the supply socket. .To avoid the risk of fire or electric shock, do not expose the unit to rain or moisture, .Do not attempt to open the cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel. .Keep the unit away from radiators or other sources of heat. .Do not operate or store the unit close to strong magnetic fields- .Do not spill liquid of any kind onto the u
ページ10に含まれる内容の要旨
.DIGITAL AUTO TRACKING This VCP plays clear pictures without special operations. In the Auto tracking mode the play lamp will blink. 2. SELF PICTURE ADJUSTMENT Since the HEAD DRUM rotates regularly independent of voltage change or tape condition. the picture is always stable. 3. AUTO START FEATURE The VCP will automatically power on and go into PLAY mode when a cassette is inserted. 7
ページ11に含まれる内容の要旨
~ Moisture condensation may occur @ When the moisture condensation 0) At room temperature, if you pour ice when the VCP is moved from a cold occurs inside of the VCP, NEVER water into a glass, water vapour in insert the cassette tape into the place to heated place, the temperature the air will condense on the surface of surroundings goes up due to the cassette compartment. of the glass. Remove the cassette, if loaded, by heat being switched on, or moving the This is moisture condensation. pressi
ページ12に含まれる内容の要旨
VIDEO HEAD CLOGGING The video heads are the means by which the VCP reads pictures from the tape during playback. In the unlikely event that they become dirty enough to be clogged, no picture will be played back. This can easily be determined if, during playback of a known good tape, there is good sound, but the picture is extremely snowy. If this is the case, have the video cassette player checked by qualified service personnel. VIDEO HEAD CLEANING During normal operation of the VCP the video an
ページ13に含まれる内容の要旨
-,,--~,"'-~-, ."-..~." """~..,;."' ,.- "' " "'-"":, ""-"' ; ,;-~ ~~.:~*~; UNLOADING LOADING .Press the STOP/EJECT key twice on the VCP (in the .Push the cassette into the cassette compartment PLAYBACK mode). This first press will stop the tape. gently. (Arrow mark at the top) The second press will eject the tape. The cassette-in indicator lamp will be lit out. II * An inverted cassette cannot be inserted O .The cassette-in indicator lamp is lit up. .Pull the cassette out gently. L.J I-/ * Upon i
ページ14に含まれる内容の要旨
(3) STOP ~ PLAYBACK
ページ15に含まれる内容の要旨
The VCP enters the playback mode during special operations as soon as the PLAY key is pressed. During special operations noise bars and loss of color may affect the picture. This is not a fault with this unit. (i) TO VISUALLY SEARCH ~ TO OPERATE RE-AUTO TRACKING CD TO VISUALLY SEARCH FORWARD REVERSE .Press the PLAY key during playback and then the VCP enters the Re- .Press the FF key once in the .Press the REW key once in the play- Auto Tracking mode. back mode. And then the tape is playback mod
ページ16に含まれる内容の要旨
IDENTIFICATION FRONT PANEL CD Cassette Compartment @ Stop/eject key Press this key to stop tape and once more to eject tape. @ Power key When power is supplied to the set, the power indicator @ Rewind/Review key lamp will always light up in red. If this key is pressed in the PLA YBACK mode, the VCP The Power ON and Power OFF mode will be toggled by enters the reverse picture search mode. If pressed in pressing this key. STOP mode, then the tape will rewind at high speed. When the POWER is switch
ページ17に含まれる内容の要旨
(2) CASSETTE.IN LAMP (5) PLAY KEY When the cassette is inserted, the CST-IN lamp will light up in Press this button to playbad< a recorded tape, or to release special operations such as the search modes. green. In the playback mode the indicator playback lamp will be ON @DEW LAMP in orange, and in the AUTO Tracking mode this indicator lamp This indicator will flash (if power is on) to indicate excessive will blink. moisture has been inside of VGP. Unit will not operate till it dries out sufficie
ページ18に含まれる内容の要旨
REAR PANEL CDFUSEHOLDER ~ RF OUT CHANNEL SELECTION SWITCH The main line fuse is accessible with the external fuse holder Set to channel 3 or channel 4, whichever is not being simply by unscrewing the cap. If the main line fuse should broadcasted in your area. blow then replace the fuse with a proper rated fuse (125V, 2A). 15
ページ19に含まれる内容の要旨
@ANT. IN For connecting the 1V antenna to this terminal. @ VIDEO OUT Connect this terminal to VIDEO IN terminal of your television, using the RCA cord provided. (5) AUDIO OUT Connect this terminal to AUDIO IN terminal of your television, using the RCA cord provided. (2) RF. OUT For connection to the antenna terminal of a TV receiver through the coaxial cable. ~~ DC JACK IN Connect this jack to DC Source (DC 12V). 16
ページ20に含まれる内容の要旨
.You can apply this method to DC 12V output only. .Please connect to the vehicle only after making sure of the polarity of the cigarette lighter s~et. (negative earth) 17
