ページ1に含まれる内容の要旨
3-090-240-14 (2) GB
Video Cassette
Recorder
Operating Instructions
PAL
SLV-SE840G
SLV-SE740G/I
SLV-SE240G/I
© 2004 Sony Corporation
ページ2に含まれる内容の要旨
Do not place heavy objects on the unit. WARNING If the unit is brought directly from a cold to a To prevent fire or shock hazard, do not expose the warm location, moisture may condense inside the unit to rain or moisture. VCR and cause damage to the video head and To avoid electrical shock, do not open the cabinet. tape. When you first install the unit, or when you Refer servicing to qualified personnel only. move it from a cold to a warm location, wait for about three hours before op
ページ3に含まれる内容の要旨
Getting Started Table of contents Getting Started Additional Operations 53 Playing/searching at various speeds 4 Index to parts and controls 55 Setting the recording duration time 11 Step 1 : Unpacking 56 Synchronized Recording 12 Step 2 : Setting up the remote (not available on SLV-SE240G/I) commander 58 Checking/changing/cancelling 16 Step 3 : Connecting the VCR timer settings 20 Step 4 : Setting up the VCR with 60 Recording stereo and bilingual the Auto Set Up function programmes (not av
ページ4に含まれる内容の要旨
Getting Started Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel For SLV-SE840G A?/1 (on/standby) switch J AUDIO DUB button (71) B Remote sensor (12) K PROGRAM +/– buttons* (42) (54) (64) C Tape compartment L SYNCHRO REC (Synchronized DA (eject) button (34) Recording) button (57) EH (play) button* (35) (53)/M M t LINE-2 L (left) o R (right) (fast-forward)/m (rewind) (35) jacks (covered)* (68) (69) (71) (53)/Playback Dial (35) (53) How to
ページ5に含まれる内容の要旨
Getting Started For SLV-SE740G/I A?/1 (on/standby) switch GX (pause) button (34) (70) (71) B Remote sensor (12) H RECz (record) button (38) (55) (70) C Tape compartment I PROGRAM +/– buttons* (54) (64) DA (eject) button (34) J SYNCHRO REC (Synchronized EH (play) button* (35) (53)/M Recording) button (56) (fast-forward)/m (rewind) (35) (53)/Playback Dial (35) (53) *The H (play) and PROGRAM + buttons have a tactile dot. Fx (stop) button (21) (34) (70) (71) continued Index to parts and control
ページ6に含まれる内容の要旨
For SLV-SE240G/I A?/1 (on/standby) switch Fx (stop) button (21) (34) (70) (71) BA (eject) button (34) GX (pause) button (34) (70) (71) C Remote sensor (12) H RECz (record) button (38) (55) (70) D Tape compartment I PROGRAM +/– buttons* (54) (64) EH (play) button* (35)/M (fast- forward)/m (rewind) (35) (53)/ *The H (play) and PROGRAM + buttons Playback Dial (35) (53) have a tactile dot. Index to parts and controls 6
ページ7に含まれる内容の要旨
Getting Started Display window For SLV-SE840G and SE740G/I 1 2 3 45 8 7 6 A Tape indicator E TV indicator (40) B VIDEO indicator (17) (38) F STEREO indicator (60) C Time counter/clock/line/programme G Tape speed indicators (37) position indicator (35) (37) (70) H Timer/recording indicator (38) (43) (48) (51) D (smartlink) indicator (18) For SLV-SE240G/I A Tape indicator D Recording indicator (38) B Time counter/clock/line/programme E VIDEO indicator (17) (38) position indicator (35) (37) (70) F
ページ8に含まれる内容の要旨
Rear panel For SLV-SE840G and SE740G/I For SLV-SE240G/I A (in from antenna) connector (16) E LINE-1 (EURO AV) connector (17) (17) (68) 1 B LINE-3 connector* F (out to tv) connector (16) (17) 2 LINE-2 connector* (19) (69) 1 * SLV-SE840G only 2 C Mains lead (16) (17) * SLV-SE740G/I and SE240G/I only D AUDIO (OUT) R (right), L (left) jacks (19) Index to parts and controls 8
ページ9に含まれる内容の要旨
Getting Started AZ (eject) button (34) Remote commander B (wide) button (for TV) (14) (15) C DISPLAY button (14) (35) (38) D COUNTER/REMAIN button (38) 1 E Programme number buttons* (13) (39) F - (ten’s digit) button (13) (39) 2 G / (Teletext) button (for TV)* (14) 123 H2 (volume) +/– buttons (for TV) 456 (13) 789 I a TV power on/TV mode select 0 2 button (for TV)* (13) Jz REC (record) button (38) (55) K SP (Standard Play)/LP (Long Play) 3 button* (37) L MENU button (32) (58) MX (pause)/M b
ページ10に含まれる内容の要旨
N[TV] / [VIDEO] remote control switch (12) O?/1 (on/standby) switch (13) (14) (48) 1 3 P AUDIO MONITOR button* * (14) (60) Q t TV/VIDEO button (13) (17) (38) R CLEAR button (35) (47) (58) S INPUT SELECT button (37) (51) 123 (70) 456 1 T PROG (programme) +/– buttons* 789 (13) (37) 0 c / C Teletext page access buttons 2 (for TV)* (14) 4 Uy SLOW button* (53) 4 V ×2 button* (53) W./> (index search) 3 4 buttons* * (62) X TIMER button (46) (50) 1 * The H (play), AUDIO MONITOR, number 5 and
ページ11に含まれる内容の要旨
Getting Started Step 1 : Unpacking Check that you have received the following items with the VCR: Remote commander R6 (size AA) batteries Aerial cable Note The supplied remote commander is for the exclusive use of this VCR. How to use this manual The instructions in this manual are for the 5 models: SLV-SE840G, SE740G, SE740I, SE240G and SE240I. Check your model name by looking at the rear panel of your VCR. SLV-SE840G is the model used for illustration purposes. Any difference in o
ページ12に含まれる内容の要旨
Step 2 : Setting up the remote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into the position. Using the remote Remote sensor commander You can use this remote commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with a dot (•) can be used to operate your
ページ13に含まれる内容の要旨
Getting Started ?/1 AUDIO MONITOR DISPLAY t TV/VIDEO 123 Programme 456 number 789 buttons - 0 / 2 +/– PROG +/–/ a c / C FASTEXT buttons TV control buttons To Press Set the TV to standby mode ?/1 Select an input source: aerial in or line in t TV/VIDEO Select the TV’s programme position Programme number buttons, -, PROG +/– Adjust the volume of the TV 2 +/– 1 Switch to TV (Teletext off)* a (TV) continued Setting up the remote commander 13
ページ14に含まれる内容の要旨
To Press 1 Switch to Teletext* / (Teletext) 2 Select the sound* AUDIO MONITOR 1 Use FASTEXT* FASTEXT buttons Call up the on-screen display DISPLAY 1 Change the Teletext page* c / C Switch to/from wide mode of a Sony wide TV (For (wide) other manufactures’ wide TVs, see “Controlling other TVs with the remote commander (SLV- SE840G only)” below.) Notes With normal use, the batteries should last about three to six months. If you do not use the remote commander for an extended period of tim
ページ15に含まれる内容の要旨
Getting Started Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. To switch to wide mode, see the footnotes below this table for the applicable code numbers. Manufacturer Code number Manufacturer Code number 1 1 Sony Panasonic 01* , 02 17* , 49 1 1 1 Akai 68 Philips 06* , 07* , 08* Ferguson 52 Saba 12, 13 1 1 Grundig 10* , 11* Samsung 22, 23 Hitachi 24 Sanyo 25 JVC 33 Sharp 29 Loewe 45 Telefu
ページ16に含まれる内容の要旨
Step 3 : Connecting the VCR If your TV has a Scart (EURO-AV) connector, see page 17. If your TV does not have a Scart (EURO-AV) connector Mains lead AERIAL IN to mains Aerial cable (supplied) : Signal flow Disconnect the aerial cable from your 1 TV and connect it to on the rear panel of the VCR. Connect of the VCR and the aerial 2 input of your TV using the supplied aerial cable. Connect the mains lead to the mains. 3 Note When you connect the VCR and your TV only with an aerial cable, y
ページ17に含まれる内容の要旨
Getting Started If your TV has a Scart (EURO-AV) connector LINE-1 (EURO AV) Mains lead AERIAL IN to mains Aerial cable (supplied) Scart (EURO-AV) Scart cable (not supplied) : Signal flow Disconnect the aerial cable from 1 your TV and connect it to on the rear panel of the VCR. Connect of the VCR and the 2 aerial input of your TV using the supplied aerial cable. Connect LINE-1 (EURO AV) on 3 the VCR and the Scart (EURO- AV) connector on the TV with the optional Scart cable. This connecti
ページ18に含まれる内容の要旨
About the SMARTLINK features (not available on SLV-SE240G/I) If the connected TV complies with 1 SMARTLINK, MEGALOGIC* , 2 3 EASYLINK* , Q-Link* , EURO 4 5 VIEW LINK* , or T-V LINK* , this VCR automatically runs the SMARTLINK function after you complete the steps on the previous page (the indicator appears in the VCR’s display window when you turn on the TV). You can enjoy the following SMARTLINK features. TV Direct Rec You can easily record what you are watching on the TV when the VC
ページ19に含まれる内容の要旨
Getting Started Additional connections To a stereo system (not available on SLV- SE240G/I) AUDIO R, L You can improve sound LINE IN quality by connecting a stereo system to the AUDIO R, L jacks as shown on the right. Audio cable (not supplied) : Signal flow To a satellite or digital tuner with Line Through Using the Line Through 1 2 LINE-3* or LINE-2* function, you can watch LINE programmes from a satellite OUT or digital tuner connected to this VCR on the TV even when the VCR is turn
ページ20に含まれる内容の要旨
Step 4 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the TV channels, guide channels for the VIDEO Plus+* system, and VCR clock automatically. Turn on your TV and set it to the video channel. 1 If your TV does not have a Scart (EURO-AV) connector, tune the TV to channel 21 (the initial RF channel for this VCR). Refer to your TV’s manual for TV tuning instructions.
