ページ1に含まれる内容の要旨
3-073-156-11 (1) GB
Video Cassette
Recorder
Operating Instructions
PAL NTSC
SLV-ED929MI
SLV-ED925PS
SLV-ED828ME/SG
SLV-ED825PS
SLV-ED323ME/SG
SLV-ED225PS
© 2002 Sony Corporation
ページ2に含まれる内容の要旨
• If the unit is brought directly from a cold WARNING to a warm location, moisture may To prevent fire or shock hazard, do not condense inside the VCR and cause expose the unit to rain or moisture. damage to the video head and tape. When To avoid electrical shock, do not open the you first install the unit, or when you cabinet. Refer servicing to qualified move it from a cold to a warm location, personnel only. wait for about four hours before operating the unit. The mains lead must only be chan
ページ3に含まれる内容の要旨
Getting Started Table of Contents Additional Operations Getting Started 48 Playing/searching at various speeds 4 Index to parts and controls 49 Setting the recording duration time 10 Step 1 : Unpacking 50 Checking/changing/cancelling 11 Step 2 : Setting up the remote timer settings commander 52 Recording stereo and bilingual 13 Step 3 : Connecting the VCR programmes (not available on SLV- 15 Step 4 : Setting up the VCR with ED323ME/SG and ED225PS) the Auto Set Up function 55 Searching using the
ページ4に含まれる内容の要旨
Getting Started Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel For SLV-ED929MI, ED925PS, ED828ME/SG and ED825PS 1 ?/1 ON/STANDBY switch 9 M FF (fast-forward) button (30) (48) 2 Remote sensor (11) q; m REW (rewind) button (30) (48) 3 Tape compartment qa EASY TIMER (36) 4 A EJECT button (30) qs PROGRAM/TRACKING +/– 1 5 H PLAY button* (30) (48) 1 buttons* (37) (56) 1 6 x STOP button* (17) (30) (62) qd LINE-2 IN VIDEO/AUDIO L/R 7 z REC (record)
ページ5に含まれる内容の要旨
Getting Started For SLV-ED323ME/SG and ED225PS 1 ?/1 ON/STANDBY switch 8 z REC (record) button (33) (49) (62) 2 A EJECT button (30) 9 x STOP button (17) (30) (62) 3 Remote sensor (11) q; X PAUSE button (30) (41) (62) 4 Tape compartment qa EASY TIMER (36) 5 m REW (rewind) button (30) (48) qs PROGRAM/TRACKING +/– 6 H PLAY button (30) (48) buttons* (37) (56) 7 M FF (fast-forward) button (30) (48) * The PROGRAM/TRACKING + button has a tactile dot. continued Getting Started 5
ページ6に含まれる内容の要旨
Index to parts and controls (continued) Display window 1426 3 578 qa 0 9 1 Tape indicator 8 Timer indicator (39) (43) (46) 2 START indicator (37) 9 Recording indicator (33) 3 STOP indicator (37) q; Time counter/clock/line/programme position indicator (31) (32) (62) 4 MONTH indicator (40) qa Tape speed indicators (32) (38) 5 YEAR indicator 1 6 NICAM indicator* (53) 1 * SLV-ED929MI and ED925PS only 2 7 STEREO indicator* (52) 2 * not available on SLV-ED323ME/SG and ED225PS Getting Started 6
ページ7に含まれる内容の要旨
Getting Started Rear panel For SLV-ED929MI, ED925PS, ED828ME/SG and ED825PS 1 2 3 5 4 For SLV-ED323ME/SG and ED225PS 1 2 3 5 4 1 (in from antenna) connector (13) 4 LINE OUT AUDIO R/L/VIDEO 1 (audio right/audio left/video) jacks* 2 LINE IN 1 AUDIO R/L/VIDEO 2 LINE OUT AUDIO/VIDEO jacks* 1 (audio right/audio left/video) jacks* (14) (61) 2 LINE IN 1 AUDIO/VIDEO jacks* 5 (out to tv) connector (13) (60) 1 3 Mains lead (13) * SLV-ED929MI, ED925PS, ED828ME/SG and ED825PS only 2 * SLV-ED323ME/SG and ED2
ページ8に含まれる内容の要旨
Index to parts and controls (continued) 1 Z EJECT button (30) Remote commander 2 INPUT SELECT button (32) (45) (62) 3 TV/VIDEO button (for TV) 4 CLEAR button (31) (42) (50) 5 Programme number buttons* (42) 6 -/-- (ten’s digit) button 7 VOL (volume) +/– buttons 123 8 z REC (record) button (33) (49) 456 9 REC SPEED (recording speed) button (32) 789 q; MENU button (21) (50) 0 qa X PAUSE/M button (21) (30) x STOP/m button (21) (30) m REW (rewind)/< button (21) (30) (48) M FF (fast-forward)/, button
ページ9に含まれる内容の要旨
Getting Started qs ?/1 (on/standby) switch (43) qd •TV/VIDEO remote control switch (11) 1 2 qf AUDIO MONITOR button* * (52) 3 qg G-CODE button* (42) qh DISPLAY button (31) (33) 1 qj PROG (programme) +/– buttons* (34) qk y SLOW button (48) 123 ql ×2 button (48) 456 w; ./> INDEX SEARCH 789 buttons (55) 0 1 * The H PLAY, AUDIO MONITOR, number 5 and PROG + buttons have a tactile dot. 2 * not available on SLV-ED323ME/SG and ED225PS 3 * SLV-ED929MI only Getting Started 9
ページ10に含まれる内容の要旨
Step 1 : Unpacking Check that you have received the following items with the VCR: • Remote commander • Aerial cable • R6 (size AA) batteries • Plug adaptor (SLV-ED828ME and ED323ME only) Check your model name The instructions in this manual are for the 8 models: SLV-ED929MI, ED925PS, ED828ME/SG, ED825PS, ED323ME/SG and ED225PS. Check your model name by looking at the rear panel of your VCR. SLV-ED929MI is the model used for illustration purposes. Any difference in operation is clearly indicat
ページ11に含まれる内容の要旨
Getting Started Step 2 : Setting up the remote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Using the remote Remote sensor commander You can use this remote commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with a dot (•) can be used to operate you
ページ12に含まれる内容の要旨
Step 2 : Setting up the remote commander (continued) Notes • With normal use, the batteries should last about three to six months. • If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage. • Do not use a new battery together with an old one. • Do not use different types of batteries together. • Some buttons may not work with certain Sony TVs. Getting Started 12
ページ13に含まれる内容の要旨
Getting Started Step 3 : Connecting the VCR Connect the aerial to your VCR and TV as shown below to watch TV programmes and VCR pictures on your TV. In addition, if your TV has audio/video (A/V) input jacks, we recommend you connect the VCR to your TV using an audio/video cable to get a better picture and sound. Connecting the aerial Mains lead AERIAL IN to mains Aerial cable (supplied) : Signal flow 1 Disconnect the aerial cable from your TV and connect it to on the rear panel of the VCR. 2 C
ページ14に含まれる内容の要旨
Step 3 : Connecting the VCR (continued) Additional connections For SLV-ED929MI, ED925PS, ED828ME/SG and ED825PS To a TV that has audio/ video input jacks This additional connection improves picture and sound LINE OUT quality. Connect the TV as LINE IN shown on the right. Audio/video cable (not supplied) For SLV-ED323ME/SG and ED225PS LINE OUT LINE IN Audio/video cable (not supplied) To a stereo system (not available on SLV- ED323ME/SG and ED225PS) LINE OUT You can improve sound AUDIO R/L LINE I
ページ15に含まれる内容の要旨
Getting Started Step 4 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the language for the on-screen display and TV channels automatically. 1 Turn on your TV and set it to the video channel. Tune the TV to channel 51 (for SLV-ED929MI, ED925PS, ED825PS and ED225PS) or 32 (for SLV-ED828ME/SG and ED323ME/SG) (the initial RF channel for this VCR). Refer to your TV manual for
ページ16に含まれる内容の要旨
Step 4 : Setting up the VCR with the Auto Set Up function (continued) 3 Press OK. PLAY The SYSTEM SELECT menu appears. OK For SLV-ED929MI SYSTEM SELECT SYSTEM–B/G SYSTEM–D/K SYSTEM–I SYSTEM–B/B U.S–ANT. U.S–HRC U.S–IRC JAPAN SELECT : EXECUTE : OK END : MENU For SLV-ED925PS, ED828ME/SG, SYSTEM SELECT ED825PS, ED323ME/SG and SYSTEM – B/G ED225PS SYSTEM – D/K SYSTEM – I SELECT : SET : OK EXIT : MENU 4 Press M/m/
ページ17に含まれる内容の要旨
Getting Started To cancel the Auto Set Up function Press MENU. To change the RF channel If the picture does not appear clearly on the TV, change the RF channel on the VCR and TV. Select INSTALLATION from the menu, then press M/m to highlight VCR OUTPUT CH and press ,. Select the RF channel by pressing the M/m buttons. Then, tune the TV to the new RF channel so that a clear picture appears. Tip • If you want to change the language for the on-screen display from the one preset in the Auto Set U
ページ18に含まれる内容の要旨
Step 5 : Setting the clock You must set the time and date on the VCR to use the timer features properly. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. • Refer to “Index to parts and controls” for button locations. MENU 1 Press MENU, then press M/m/
ページ19に含まれる内容の要旨
Getting Started 4 Set the day, month, and year in sequence by pressing , to select PLAY the item to be set, and press M/m to OK 18:2 3 0 2 8 / SEP /0 02 select the digits, then press ,. SAT The day of the week is set automatically. SELECT : SET : END : OK EXIT : MENU MENU 5 Press MENU to exit the menu. Tip • To change the digits while setting, press < to return to the item to be changed, and select the digits by pressing M/m. Getting Started 19
ページ20に含まれる内容の要旨
Step 6 : Selecting the TV system You must select the appropriate TV system for your area. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. • Refer to “Index to parts and controls” for button locations. MENU 1 Press MENU, then press M/m/
