ページ1に含まれる内容の要旨
®
CleanView
BAGLESS
®
Power Trak
USER’S GUIDE
3593/3594/6590 SERIES
3
Safety Instructions
4
Product View
5-6
Assembly Instructions
6-9 Operation / Special Tools
10-13
Maintenance
13
Consumer Services
14
Troubleshooting
15
Replacement Parts
16
Warranty
ページ2に含まれる内容の要旨
® Thanks For Buying A BISSELL CleanView We’re glad you purchased a BISSELL CleanView Vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home vacuuming system. Your BISSELL CleanView is well made, and we back it with a limited comprehensive one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services Department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-gran
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic Keep hair, loose clothing, fingers, and all parts precautions should be observed, including of body away from openings and moving parts. the following: Turn off all controls before plugging or unplugging vacuum cleaner. READ ALL INSTRUCTIONS Use extra care when cleaning stairs. Do not pick up flammable materials (lighter BEFORE USING YOUR fluid, gasoline, kerosene, etc.) or use in the UPRIGHT VACUUM. presence of
ページ4に含まれる内容の要旨
Handle Cord Clip Hose Clip Stretch Hose Carrying ® TurboBrush Handle (Select Models Only) ™ Quick Release Cord Wrap Crevice Tool Power Cord Clean Carpet Sensor (Select Models Only) Power Switch ® Quick Reach Clean Filter Indicator Handle Upper Tank Knob (Select Models Only) Louvers Extension Wand Hose Wand Upper Tank Frame and Filter Dusting Brush/ (Inside Louvers) Hose Upholstery Tool Wand Base Upper Tank Post-Motor Handle Release Filter Pedal Optional Hepa Dirt Container Media Filter (Select
ページ5に含まれる内容の要旨
How To Use This Guide This User’s Guide has been designed to help you get the most satisfaction from your BISSELL CleanView. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide WARNING: thoroughly before assembling your vacuum cleaner. Plastic film can be Pay particular attention to the product diagram, dangerous. To avoid assembly instructions, and part names. Locate and danger of suffocation, kee
ページ6に含まれる内容の要旨
Attach Vacuum Hose and Tools Position the Hose Assembly on the back of the 1. vacuum as shown. Attach the Hose with the remaining two screws from 2. the packet. Tighten securely with a screwdriver. ™ For Models with the Twist ‘n Snap Hose Position the Twist ‘n Snap Hose assembly on the 1a back of the vacuum. 2a Line up the tabs on the base of the Twist ‘n Snap Hose with the corresponding notches on the hose collar as shown. Turn the Twist ‘n Snap Hose to the right to lock 3a the hose into pla
ページ7に含まれる内容の要旨
How To Use Your Vacuum Handle Positions 1 Press the Handle Release Pedal with your foot to place 2 your vacuum into one of three cleaning positions. Upright- For storage and above floor cleaning with tools. 1. Normal Cleaning- Press Handle Release Pedal once. Use 2. for most household floor cleaning tasks. 3 Low Cleaning- With the vacuum in normal cleaning 3. position, press Handle Release Pedal again. Use for reaching under low furniture such as tables, chairs or beds. Height Adjustment The P
ページ8に含まれる内容の要旨
Clean Carpet Sensor Select models only The Clean Carpet Sensor detects dirt being picked up while the vacuum is in use.When the vacuum is picking up dirt, the red light will come on. Occasionally, the lights may alternate quickly back and forth if the area is only lightly soiled or the dirt is spread out. For the best cleaning, continue to vacuum until the green light remains constantly illuminated. Clean Filter Indicator Select Models Only The Clean Filter Indicator tells you when airflow in t
ページ9に含まれる内容の要旨
Special On-Board Tools Your vacuum is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacu- um cleaner when you select one of the special tools. Raise Handle to Upright Position. 1. Grasp the Quick Reach Handle and lift Hose Wand to 2. separate from suction intake opening. Attach tools by firmly pushing onto Vacuum Hose or 3. Extension Wand. Dusting Brush Tool (Select Models): Use to dust furniture, blinds, books, lamps, shelves, draperies, and cushions. D
ページ10に含まれる内容の要旨
How To Maintain Your Vacuum To maximize your cleaning performance and extend the WARNING: life of your vacuum, it is very important that you empty To reduce the risk of electric shock, turn your dirt container and check and clean your filters fre- Power Switch OFF and quently. Perform the following maintenance steps: disconnect polarized Empty the Dirt Container when the dirt reaches the “Full” plug from electrical outlet 1. before performing line on the side. maintenance or troubleshooting c
ページ11に含まれる内容の要旨
Cleaning The Upper Tank & Filter Unplug the cleaner from electrical outlet. 1. The Upper Tank Filter can be reached by removing the Dirt 2. Container, reaching underneath the Upper Tank and turning the rim of the Filter Frame to unlock. Pull straight down to remove. Brush the dirt off the Louvers and Upper Tank Filter. The foam Upper Tank Filter may be removed and hand 3. washed in cold water with mild detergent. Rinse well then air dry thoroughly before replacing. The Upper Tank and Louvers m
ページ12に含まれる内容の要旨
Check Rotating Floor Brush and Drive Belt Continued Grasp Rotating Floor Brush at both ends and lift. 4. Clean strings, hair and other debris from Rotating Floor Motor Pulley 5. Brush, paying particular attention to brush ends. Clean strings, hair and other debris from Motor Pulley and 6. Drive Belt areas. Check Drive Belt carefully for wear, cuts or stressed areas. 7. Check Air Passageway for obstructions. Remove debris 8. from this area. Air Passageway Replace Drive Belt Unplug cleaner from el
ページ13に含まれる内容の要旨
Clearing Clogs Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. Suction Unplug cleaner from electrical outlet. 1. Inlet Empty Dirt Container. 2. Check Upper Tank for build up or clogs. 3. Remove the Upper Tank and check the suction inlet for a clog. 4. Grasp the Quick Reach Handle and lift Hose Wand to separate 5. from the suction opening. Check for a clog in the Base,
ページ14に含まれる内容の要旨
Troubleshooting WARNING: To reduce the risk of injury from moving parts and/ or electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing troubleshooting checks. Vacuum cleaner won’t run Possible Causes Remedies 1 Power cord not plugged in 1 Check electrical plug 2 Blown fuse/tripped breaker 2 Check/Replace fuse or reset breaker Vacuum cleaner or Tools won’t pick up dirt Possible Causes Remedies 1 1 Incorrect Height Adjustment Adjust Powerfoo
ページ15に含まれる内容の要旨
Replacement Parts – BISSELL Power Trak Series You may purchase replacement parts from your retailer, by calling BISSELL Consumer Services or by visiting our website. To locate a retailer near you, or to place an order using Visa, MasterCard, Discover or American Express, call BISSELL Consumer Services 1-800-237-7691 Or visit our Website - www.bissell.com Item Part No. Part Name 1 32074 Style 7/9/10 Drive Belt (2-Pack) 2 203-1007 Headlight Bulb 3 203-1063 Crevice Tool 4 203-1083 Dusting Brush 5
ページ16に含まれる内容の要旨
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc. will repair or replace (with ne
