ページ1に含まれる内容の要旨
®
Lift-Off
™
REVOLUTION
USER’S GUIDE
3760/4220/6850/6860 SERIES
3 Safety Instructions
4 Product Diagram
4-6
Assembly Instructions
6-9
Operation / Special Tools
10-13 Maintenance
14 Troubleshooting
15 Replacement Parts
15
Consumer Services
16 Warranty
ug603-5567_3760-6850_905.indd 1 ug603-5567_3760-6850_905.indd 1 1 10/3/05 3:52:43 PM 0/3/05 3:52:43 PM
ページ2に含まれる内容の要旨
® ™ Thanks For Buying A BISSELL Lift-Off Revolution We’re glad you purchased a BISSELL Vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system. Your BISSELL Vacuum is well made, and we back it with a limited comprehensive one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic ■ Keep hair , loose clothing, fingers, and all parts precautions should be observed, including of body away from openings and moving parts. the following: ■ T urn off all controls before plugging or unplugging vacuum cleaner. READ ALL INSTRUCTIONS ■ Use extra care when cleaning stairs. BEFORE USING YOUR ■ Unplug before attaching the TurboBrush. ■ Do not pick up flammable materials (lighter UPRIGHT VACUU
ページ4に含まれる内容の要旨
Handle Comfort Grip Cord Clip Dusting Brush/ Upholstery Tool Release Button Stretch Hose Power Switch Hose Clip Brush On/Off Quick Release Switch Cord Wrap Upper Tank Knob Detachable Canister Twist n' Snap Hose Connection Clean Filter Indicator (Select Crevice Tool Models Only) Telescoping Louvers/Filter HEPA Media Extension Wand Frame Post-Motor Filter Upper Tank Filter Power Cord (Inside Louvers) Hose Grip Upper Tank Dirt Container Handle Release Dust Chamber Pedal with Screen
ページ5に含まれる内容の要旨
How To Use This Guide This User’s Guide has been designed to help you get the most satisfaction from your BISSELL Vacuum. You’ll find assembly and operating instructions, safety precautions, as well as W ARNING: maintenance and troubleshooting instructions. Plastic film can be Please read this Guide thoroughly before dangerous. To avoid danger of suffocation, keep away assembling your vacuum cleaner. from babies and children. Pay particular attention to the product diagram, assembly i
ページ6に含まれる内容の要旨
Attach Vacuum Hose and Tools Continued Combination Tool Snap the Telescoping Extension Wand, Crevice Tool, 3. and Combination Tool into storage clips as shown. ® On Board TurboBrush (Select Models Only) 4. The TurboBrush Bracket slides onto the Hanger on the front of the Handle. Attach the Bracket by aligning the slots with the rectangular part on the Telescoping Hanger as shown and pulling down until it is locked Wand into place. Note: If you do not wish to store the TurboBrush Crevice
ページ7に含まれる内容の要旨
Power Height Adjustment Tip: The Powerfoot on your vacuum can be Before cleaning under adjusted to clean several floor surfaces. low furniture, check area first for objects NOTE: For optimal cleaning performance, adjust to that might harm the the lowest practical setting. If your cleaner is unit or block the difficult to push, adjust to the next higher setting. Vacuum Hose. Place Handle in Upright Position. 1. Turn Height Adjustment Knob to desired setting. 2. Lowest Setting – For bare
ページ8に含まれる内容の要旨
Special Tools Continued ® TurboBrush (Select Models): Use rotating brush action for small areas such as stairs and upholstery. Note: Press gently when using TurboBrush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating. Deluxe Bare Floor Tool (Select Models): Use for bare floors. Swivel head turns to get into tight spaces and fits under cabinets. Note: The Deluxe Bare Floor Tool does not store on board. All items may not be included with your model. More to
ページ9に含まれる内容の要旨
Shoulder Strap Buckle Select Models Only The Shoulder Strap may be used while cleaning with the Detachable Canister. To attach the Shoulder Strap, wrap the Velcro ends attached to the 1. bottom of the strap securely around the Canister handle as shown. To obtain maximum strength, overlap the loose ends completely and press securely in place. The plastic Buckle must be positioned on top of the canister 2. handle as shown in the illustration. The length of the strap may be adjusted as require
ページ10に含まれる内容の要旨
How to Maintain Your Vacuum To maintain maximum cleaning performance, the following maintenance steps must be performed: W ARNING: Empty the Dirt Container when the dirt reaches the “Full” line 1. To reduce the risk of electric on the front. shock, turn Power Switch OFF and disconnect polarized plug Check the Upper Tank and Pre-Motor Filters at least once a 2. from electrical outlet before month and clean and replace as needed. performing maintenance or troubleshooting checks. Replace t
ページ11に含まれる内容の要旨
Cleaning The Pre-Motor and Post-Motor Filters Maintenance Unplug the cleaner from electrical outlet. 1. The Pre-Motor Filter protects the motor from dirt particles. It 2. is located in the slide out tray underneath the Dirt Container. Pre-Motor Filter If the filter becomes dirty, pull out the tray, lift out the filter and clean. This filter may be hand washed in cold water with mild detergent. Rinse well and air dry thoroughly before replacing. HEPA Media The HEPA Media Post-Motor Filter a
ページ12に含まれる内容の要旨
Rotating Brush and Drive Belt Maintenance Continued Place one end of the new Drive Belt over Motor Pulley and the 9. other end over the Brush in the space between the bristles. Pull the Brush firmly to stretch the Drive Belt and place ends 10. of Brush down into slots on sides as shown. Turn Brush several times by hand to center the Drive Belt. Reposition Brush Cover and screws. Tighten 11. screws securely. W ARNING: To reduce the risk of electric shock, turn Power Switch OFF and disconne
ページ13に含まれる内容の要旨
Clearing Clogs Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. Unplug cleaner from electrical outlet. 1. Empty Dirt Container. 2. Suction Check Upper Tank for build up or clogs. 3. Inlet Remove the Upper Tank and check the suction inlet for 4. a clog. Grasp the Hose Grip and lift to separate from the suction 5. opening. Check for a clog in the Base or the Hose. Re
ページ14に含まれる内容の要旨
Troubleshooting W ARNING: To reduce the risk of injury from moving parts and/ or electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing troubleshooting checks. Vacuum cleaner won’t run Possible Causes Remedies Power cord not plugged in Check electrical plug 1 1 Blown fuse/tripped breaker Check/Replace fuse or reset breaker 2 2 Thermal protector activated Allow cleaner to cool for 30 minutes, 3 3 see pg. 13 No Power at Rotati
ページ15に含まれる内容の要旨
BISSELL Consumer Services For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. ET Saturday 9 a.m. — 8 p.m. ET Or write: BISSELL Homecare, Inc. PO Box 3606 Grand Rapids, MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available. Please record your Model Number: _______________Please record your Purcha
ページ16に含まれる内容の要旨
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc. will repair or replace (with
