ページ1に含まれる内容の要旨
®
Lift-Off
BAGLESS
USER’S GUIDE
3750/6595 SERIES
3
Safety Instructions
4
Product Diagram
4-6
Assembly
6-8
Operations / Special Tools
Maintenance
9-13
Troubleshooting
14
15
Replacement Parts
15
Consumer Services
16
Warranty
ページ2に含まれる内容の要旨
® Thanks for buying a BISSELL Lift-Off We’re glad you purchased a BISSELL Lift-Off Vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system. Your BISSELL Lift-Off is well made, and we back it with a limited comprehensive one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-gran
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Keep hair, loose clothing, fingers, and all When using an electrical appliance, parts of body away from openings and basic precautions should be observed, moving parts. including the following: Turn off all controls before plugging or READ ALL INSTRUCTIONS unplugging vacuum cleaner. BEFORE USING YOUR Use extra care when cleaning stairs. UPRIGHT VACUUM. Unplug before attaching the turbo brush. Always connect to a polarized outlet (left slot is Do not pic
ページ4に含まれる内容の要旨
Comfort Grip Handle Cord Clip Dusting Brush/ Upholstery Tool Hose Clip Release Button Stretch Hose Quick Release Upper Cord Wrap Tank Power Knob Switch Brush On/Off Crevice Switch Tool Carrying Handle Detachable Canister Louvers/Filter Frame Hepa Upper Tank Filter Media (Inside Louvers) Post- Motor Telescoping Filter Upper Tank Extension Wand Hose Grip Power Cord Dirt Container Lock ’n ™ Pre-Motor Filter Seal Lever Handle Release Pedal Hose Grip Base Headlight Height Adjustment Knob CAUTION:
ページ5に含まれる内容の要旨
How To Use This Guide WARNING: This User’s Guide has been designed to help you get the Plastic film can be dangerous. most satisfaction from your BISSELL Lift-Off. You’ll find To avoid danger of suffocation, assembly and operating instructions, safety precautions, as well keep away from babies as maintenance and troubleshooting instructions. Please read and children. this Guide thoroughly before assembling your vacuum cleaner. Pay particular attention to the product diagram, assembly instructi
ページ6に含まれる内容の要旨
Attach Vacuum Hose and Tools Continued Slide the end of the Hose Grip onto the Hose Grip Base. 3. Place the Hose into the Hose Clip. NOTE: The Powerfoot will not operate effectively Combination unless the Hose is firmly attached to the base. Tool Snap the Telescoping Extension Wand, Crevice Tool, and 4. Combination Tool into the storage clips as shown. Telescoping Crevice Tool Wand How To Use Your BISSELL Lift-Off Power Cord Quick Release CAUTION: The Power Cord is stored at the side of the Det
ページ7に含まれる内容の要旨
Power Height Adjustment Tip: The Powerfoot on your BISSELL Lift-Off can be adjusted to clean Before cleaning several floor surfaces. under low furniture, check NOTE: For optimal cleaning performance, adjust to area first for the lowest practical setting. If your cleaner is objects that difficult to push, adjust to the next higher setting. might harm the Place Handle in Upright Position. unit or block the 1. Vacuum Hose. Turn Height Adjustment Knob to desired setting. 2. Lowest Setting – For ba
ページ8に含まれる内容の要旨
Cleaning With The Detachable Canister Release The Detachable Canister feature makes it possible to easily take Button the powerful cleaning action of your BISSELL Lift-Off to stairways, auto interiors, and other hard-to-reach areas of your home. Before detaching the Canister, your Lift-Off must be in its fully Upright Position. You do not need to turn off the power first. Press the Release Button at the top of the Canister 1. Handle and lift the Canister to remove. Detach the Vacuum Hose from th
ページ9に含まれる内容の要旨
How to Maintain Your BISSELL Lift-Off To maintain maximum cleaning performance, the following maintenance steps must be performed: WARNING: To Empty the Dirt Container when the dirt reaches the “Full” reduce the risk of electric 1. line on the side. shock, turn Power Switch OFF and disconnect polarized plug from Check the Upper Tank and Pre-Motor Filters monthly and electrical outlet before 2. clean and replace as needed. performing maintenance or troubleshooting checks. Replace the HEPA M
ページ10に含まれる内容の要旨
Cleaning The Upper Tank & Filter Use only BISSELL Replacement Filters in your BISSELL Lift-Off. Upper Tank Filter 203-1085 Unplug the cleaner from electrical outlet. 1. The Upper Tank Filter can be reached by removing the 2. Dirt Container, reaching underneath the Upper Tank and turning the rim of the Filter Frame to unlock. Pull straight down to remove. Brush the dirt off the Louvers and Upper Tank Filter. The foam Upper Tank Filter may be removed and hand 3. washed in cold water with mild dete
ページ11に含まれる内容の要旨
Check Rotating Brush and Drive Belt You should check your vacuum cleaner’s Rotating Floor Brush and Drive Belt regularly for wear or damage. You should also clean the brush and brush ends of strings, hair, and carpet fibers. These can CAUTION: wrap around the brush and hamper its ability to effectively clean To reduce the risk of your carpet. Also remove any debris that has accumulated under injury from moving the brush cover. parts, turn off vacuum cleaner and disconnect Unplug cleaner from e
ページ12に含まれる内容の要旨
Replace Drive Belt Use only BISSELL Style 8 Replacement Belts (#3200) in your BISSELL Lift-Off. Unplug cleaner from electrical outlet. 1. With Rotating Floor Brush removed from vacuum cleaner (Steps 1-5 of Check Rotating Floor Brush and Drive Belt), grasp old Drive Belt 2. and remove from Motor Pulley. Discard old Drive Belt. Place new Drive Belt over Motor Pulley and stretch other end over 3. Rotating Floor Brush in the space between the bristles. Place ends of Rotating Floor Brush down into sl
ページ13に含まれる内容の要旨
Clearing Clogs Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. Unplug cleaner from electrical outlet. 1. Empty Dirt Container. 2. Check Upper Tank for build up or clogs. Suction 3. Inlet Remove the Upper Tank and check the suction inlet for a clog. 4. Check the clear panel on the back of the Canister for a clog. If there 5. is an obstruction, remove the screws to remove
ページ14に含まれる内容の要旨
Troubleshooting Vacuum cleaner won't run. Possible Causes Remedies 1 Power cord not firmly plugged in 1 Check electrical plug 2 Blown household fuse or breaker 2 Check/replace fuse - Reset breaker Thermal protector activated Allow cleaner to cool for 30 minutes, see pg. 13 3 3 No Power at Rotating Floor Brush. Possible Causes Remedies 1 Canister is not securely seated 1 Remove Canister and replace, making sure that it “clicks” into place Brush Switch turned to “Off” Make sure Brush Switch is in
ページ15に含まれる内容の要旨
Replacement Parts – BISSELL Lift-Off Series You may purchase replacement parts from your retailer, by calling BISSELL Consumer Services or by visiting our website. To locate a retailer near 1 2 you, or to place an order using Visa, MasterCard, Discover or American Express, call BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. ET 3 4 5 Saturday 9 a.m. — 8 p.m. ET Or visit our Website - www.bissell.com Item Part No. Part Name 1 3200 Style 8 Drive Belt (2-Pack) 2 203-1007
ページ16に含まれる内容の要旨
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc. will repair or replace (with ne
