ページ1に含まれる内容の要旨
Owner’s guide
NV350UKMS
NV350UKMS_26_IM_ENG_120906_1.indd 1 12-09-06 2:59 PM
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING AN ELECTRICAL WARNING: APPLIANCE, BASIC SAFETY PRECAUTIONS TO REDUCE THE RISK OF FIRE, ELECTRIC SHOULD ALWAYS BE OBSERVED, SHOCK OR INJURY: INCLUDING THE FOLLOWING: GENERAL ELECTRICAL SAFETY: READ ALL INSTRUCTIONS BEFORE USING ® 1. U nplug from electrical outlet when not in use YOUR SHARK NAVIGATOR LIFT-AWAY. and before servicing. 2. DO NOT use vacuum with a damaged cord or IMPORTANT: plug. If the supply cord is damaged,
ページ3に含まれる内容の要旨
English HOSE ATTACHMENTS: DUST CUP/FILTERS/ACCESSORIES: 1. DO NOT use if air flow is restricted; if the air Before turning on the vacuum: paths, the hose, or the accessories become 1. M ake sure that all filters are thoroughly dry blocked, turn the vacuum cleaner off. Remove after routine cleaning. all obstructions before you turn on the unit 2. Make sure that dust cup and all filters are in again. place after routine maintenance. 2. K eep the end of the hose and accessory 3. Make sure
ページ4に含まれる内容の要旨
This appliance complies with the WEEE-Directive 2002/96/EC on the disposal of electrical and electronic equipment (WEEE). This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from unco
ページ5に含まれる内容の要旨
English Contents Getting Started 6 Thank you for purchasing Mode 1: Upright Vac 8 ® the Shark Mode 2: Detachable Canister 10 Navigator Above-Floor Cleaning 11 Lift-Away. With Floor Nozzles 11 Storing 12 Maintenance 12 Emptying the Dust Cup 13 Cleaning the Pre-Motor Filters 13 Cleaning the Post-Motor HEPA Filter 14 Cleaning the Turbo Brush 14 Cleaning the Motorized Floor Brush 15 Checking for Blockages 15 Troubleshooting Guide 17 5 HELP LINE: 0844 873 0728 NV350UKMS
ページ6に含まれる内容の要旨
Getting Started Fig. 1 Fig. 2 Fig. 3 Fig. 4 ACCESSORIES: CREVICE TOOL R each deep into narrow spaces and clean between FIRST THING’S FIRST, YOU NEED TO KNOW cushions, under radiators and baseboards and in WHAT’S IN THE BOX YOU JUST OPENED: hard to reach crevices and corners. (Fig. 1) ® • Shark Navigator NV350SL Lift-Away with BRISTLE BRUSH ATTACHMENT HEPA filtration Dust shelves, lamp shades, window blinds, books, • 14 cm Crevice Tool furniture and other upholstered household items.
ページ7に含まれる内容の要旨
English ® Y o u r n e w Shark Navigator Lift-Away vacuum cleaner can easily be configured into different cleaning modes to meet all your cleaning needs: upright vacuum and detachable canister - both with constant suction power. Fig. 5 Fig. 6 MODES: 1 UPRIGHT VAC 2 DETACHABLE CANISTER Take the detachable canister with you around the U pright vacuuming - floors and carpets. (Fig. 5) house to clean all kinds of hard to reach places. (Fig. 6) 7 NV350UKMS_26_IM_ENG_120906_1.indd 7 12-09-06
ページ8に含まれる内容の要旨
Mode 1: Upright Vac T o reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or converting modes. WARNING: The On/Off switch is on the top of the detachable canister. Always ensure the power is OFF (“O” position) before plugging and unplugging. d b Upper a Cord Storage Wrap e a c Fig. 7 Fig. 8 Fig. 9 Fig. 10 TO ASSEMBLE: 4 Slide the accessory holder (a) positioned opposite the upper cord wrap, over the extension wand. 1 Place the fl
ページ9に含まれる内容の要旨
English Cord Suction Hook Release Collar Release suction for easier push & pull on high pile a d carpets and area rugs. b c Fig. 11 Fig. 12 TO USE: 4 Gently press the floor nozzle down with your foot while you grasp the handle and tilt it back towards 1 R otate the cord release to quickly release the you. (Fig. 12) power cord. N O T E : The rotating brush on the motorized 2 S ecure the power cord in the cord hook (a). floor brush will not spin unless the nozzle is flat (Fig. 11
ページ10に含まれる内容の要旨
Mode 2: Detachable Canister You can carry your vacuum cleaner in both modes by the carry handle located on top of the dust cup. a b Fig. 13 Fig. 14 LIFT AWAY DETACHABLE CANISTER FOR 3 Attach desired accessory onto the end of either PORTABLE CLEANING the extension wand or the handle. 1 Separate the detachable canister from the floor 4 P ress the On/Off switch to the “I” position to nozzle. (See page 8, Fig. 7) turn the vacuum on for above-floor cleaning and hold the handle in one hand w
ページ11に含まれる内容の要旨
English Above-Floor Cleaning With Floor Nozzles Release suction for easier push & pull on high pile a carpets and area rugs. Fig. 15 Suction Release Collar CLEAN ABOVE THE FLOOR IN UPRIGHT VAC OR Fig. 16 DETACHABLE CANISTER MODE 1 Press the handle release button and pull the CLEAN THE FLOOR IN DETACHABLE CANISTER handle up or press the extension wand release MODE button and pull the extension wand up. 1 Press the extension wand release button and pull 2 Attach desired accessory onto
ページ12に含まれる内容の要旨
Storing Maintenance T o reduce the risk of electric shock, unplug the unit before performing any cleaning, maintenance, or troubleshooting checks. R eassemble all parts securely before operating vacuum. D O N O T operate the vacuum without the pre- motor filters and dust cup in place. D O N O T operate the vacuum with WET filters. I M P O R T A N T: Make sure all filters are completely Quick dry before inserting back into vacuum. Cord W A RN I NG : Never insert sharp objects into any
ページ13に含まれる内容の要旨
English COMPONENT MAINTENANCE SCHEDULE 1 Dust Cup Empty each time you vacuum. Pre-Motor Foam Filter Rinse and air dry every 3 months under normal use. 2 Pre-Motor Felt Filter Rinse and air dry every 3 months under normal use. 3 4 Post-Motor HEPA Filter Clean once every 2 years or as needed. Screen Pre-Motor Filter Foam Filter Felt Filter Post-Motor HEPA Filter Fig. 20 Fig. 21 CLEANING THE PRE-MOTOR FILTERS EMPTYING THE DUST CUP The dust cup needs to be emptied each time you 1 Remove the dust c
ページ14に含まれる内容の要旨
Maintenance - cont’d D O N O T put the filters in the washing machine or dishwasher. N O T E : The material in the filter will discolor over time. This is NORMAL and will not affect the performance of the filter. a Fig. 23 Fig. 25 Fig. 22 HEPA Filter Fig. 24 Fig. 26 CLEANING THE TURBO BRUSH CLEANING THE POST-MOTOR HEPA FILTER 1 Slide the locking latch (a) forward and gently tilt 1 Remove the filter cover. (Fig. 22) brush housing upward to open. (Fig. 25) 2 Take out the HEPA filter by p
ページ15に含まれる内容の要旨
English Make sure you are working in a well lit area and use a flashlight to help search for blockages. Rotating Brush Fig. 27 Fig. 28 CLEANING THE MOTORIZED FLOOR BRUSH CHECKING FOR BLOCKAGES Blockages may cause your vacuum to overheat and When your motorized floor brush needs cleaning or shut down. To prevent this from happening, check locks onto an object, it automatically shuts down to potential blockage areas after heavy use or if you prevent damage to your lifetime belt. The indicat
ページ16に含まれる内容の要旨
Maintenance - cont’d Fig. 30 Fig. 29 • R e m o v e t h e d u s t c u p a n d e x t e n s i o n w a n d Motorized Floor Brush and separate the detachable canister from the • D e t a c h t h e h o s e o n t h e m o t o r i z e d fl o o r b r u s h motorized floor brush. Look in all 4 openings at the top by squeezing the tabs together for any blockages. (Fig. 29) and pulling out, and at the bottom by pulling out the connector. Inspect inside the 3 holes. (Fig. 30) HELP LINE: 0844
ページ17に含まれる内容の要旨
English Troubleshooting Guide PROBLEM POSSIBLE REASONS & SOLUTIONS Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting back into the vacuum. (See “Maintenance” sections for instructions.) Vacuum is not Dust cup may be full; empty dust cup. picking up dirt. Check hose and hose connections for blockages; clear blockages if required. If dust cup is empty, and attachment inlets are clear, check for other blockages. (See “Checking
ページ18に含まれる内容の要旨
Notes HELP LINE: 0844 873 0728 18 NV350UKMS_26_IM_ENG_120906_1.indd 18 12-09-06 2:59 PM
ページ19に含まれる内容の要旨
Notes 19 HELP LINE: 0844 873 0728 NV350UKMS_26_IM_ENG_120906_1.indd 19 12-09-06 2:59 PM
ページ20に含まれる内容の要旨
The After Sales Division Mexborough South Yorkshire England S64 8AJ Technical Details Model number: NV350UKMS Input: 1200 Watts Main unit voltage: 220-240V~, 50/60 Hz Copyright © 2012 Euro-Pro Operating LLC Printed in China Illustrations may differ from actual product. Not to be disposed of with other household waste. NV350UKMS.E.120906.1 NV350UKMS_26_IM_ENG_120906_1.indd 20 12-09-06 2:59 PM
