ページ1に含まれる内容の要旨
Operating Instructions
Vacuum Cleaner
S 6000
en - US, CA
To prevent accidents
and machine damage,
read these instructions HS14
before
installation and use. M.-Nr. 09 283 000
ページ2に含まれる内容の要旨
Only Miele dustbags, filters and accessories with the "Original Miele" logo can be used with this vacuum. Only then can the suction power of the vacuum cleaner reach its optimum potential creating the best possible cleaning results. USE OF NON-MIELE COMPONENTS MAY VOID THE WARRANTY. The use of dustbags made of paper or a similar material, or dustbags with a cardboard retaining plate can lead to serious damage to the vacuum cleaner and may void the warranty, just as with the use of dustbags with
ページ3に含まれる内容の要旨
Contents IMPORTANT SAFETY INSTRUCTIONS Guide to the vacuum cleaner Before using the vacuum cleaner Using the included accessories Operation Power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Turning the vacuum on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Adjusting the suction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Opening
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE KEEP THESE OPERATING INSTRUCTIONS FOR FUTURE REFERENCE WARNING- Use To reduce the risk of fire, electric This vacuum cleaner is intended for shock or injury: use in domestic households or in similar working and residential This vacuum cleaner complies with environments. all legal current safety requirements. Im
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Technical Safety If the power cord is damaged it should be replaced along with a new A damaged vacuum cleaner can be cable reel by Miele Technical Service. dangerous. Check the packaging, vacuum cleaner and accessories for The electrical outlet must be fitted any signs of damage. Do not use a with a 15 A fuse. damaged appliance. On the underside of the vacuum Check the voltage rating of the handpiece is a metal insert designed to vacuum cleaner before conn
ページ6に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Proper Use Unwind the cord completely to aid the vacuum in dissipating heat. Never use the vacuum cleaner without the dustbag or filters in place. Do not vacuum items which are Otherwise it could be damaged. heavy, hard or have sharp edges. They could cause a blockage and damage If a dustbag is not inserted, the dust the appliance. compartment lid will not close. Do not force it shut. Do not pull or carry by the cord, use the cord as a handle, close a door
ページ7に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Accessories To avoid the risk of injury when vacuuming with a Miele Power or Do not use the vacuum without an Turbobrush do not touch the rotating accessory attached. The rim could be roller brush. Danger of injury. damaged and injuries could result from sharp edges. The socket on the vacuum cleaner (depending on model) must only be Only use genuine Miele dustbags used for the Miele Powerbrush with the Miele quality signet and specified for use with this app
ページ8に含まれる内容の要旨
Guide to the vacuum cleaner 8
ページ9に含まれる内容の要旨
Guide to the vacuum cleaner Hand piece XXL * Air inlet valve * Lock release button Three piece telescopic wand * Telescopic wand release button * Dust compartment lid release Floor brush * Carrying handle Socket for Powerbrush Dustbag Dust compartment filter (pre-motor filter)
Exhaust filter * Power cord Cord rewind switch Suction power selector Park-System On/Off foot switch Airflow indicator Hose connector * Suction hose * Accessory clip The illustrat
ページ10に含まれる内容の要旨
Before using the vacuum cleaner Attaching the suction hose Insert the elbow into the suction socket until it clicks. Use the inlet guides to direct insertion. Removing the suction hose Press the release buttons at the sides of the elbow and lift the hose from the socket. Connecting the handle to the suction hose Insert the suction hose into the handle until it clicks into position. 10
ページ11に含まれる内容の要旨
Before using the vacuum cleaner Connecting the handpiece and telescopic wand Insert the handpiece into the telescopic wand. Use inlet guides to direct insertion. To release the handpiece from the telescopic wand press the locking button (see arrow) and pull the handpiece away from the telescopic wand with a slight twist. Adjusting the telescopic wand This telescopic wand consists of two sections which are height-adjustable. Press the adjustment button to release the tubes and adjust to the
ページ12に含まれる内容の要旨
Before using the vacuum cleaner Floor brush settings Observe the cleaning instructions of the floor manufacturer. Depending on the floor brush the following symbols are shown: – and – and To clean carpets and area rugs: Press the foot switch marked or . To clean hard flooring: Press the foot switch marked or . Floors with very deep joints and cracks should be vacuumed using the floor brush with the bristles out. AirTeQ Combination Floor Tool This floor tool has been specially develo
ページ13に含まれる内容の要旨
Using the included accessories The following accessories are included: Dust brush with natural bristles For cleaning moldings, decorative or carved items, etc. The head of the dusting brush can be swivelled to attain the best cleaning position. For dusting particularly delicate objects. Upholstery tool For cleaning upholstery, mattresses, cushions, curtains, covers, etc. Crevice nozzle For cleaning in folds, crevices and corners. Accessory clip for the included accessories Position the a
ページ14に含まれる内容の要旨
Operation Power cord Unwind the cord completely to aid the vacuum in dissipating heat. Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces. Do not unplug by pulling the cord. To unplug grasp the plug, not the cord. This appliance is equipped with a power cord reel. Hold the plug when rewinding onto cord reel. Do not allow plug to whip
ページ15に含まれる内容の要旨
Operation Rewinding Unplug the vacuum from the outlet. Press the rewind switch - the power cord will rewind automatically. Hold the plug so that it does not whip around when rewinding. Turning the vacuum on and off Press the On/Off button. 15
ページ16に含まれる内容の要旨
Operation While vacuuming The vacuum cleaner can also stand on its end for vacuuming stairs, drapes etc. To prevent static electricity your hand must touch the metal inlay on the underside of the vacuum hand piece. Be certain to continuously touch this inlay when vacuuming fine dust, flour or sawdust as these materials are more likely to create a static discharge. To further prevent static discharge, pull the vacuum along by the hose with one hand while continuing to hold the hand piece in th
ページ17に含まれる内容の要旨
Operation Opening the air inlet valve (depending on model) The air inlet valve can be opened to quickly reduce the suction power of the tool being used, e.g. when moving from a carpet to an area rug. Open the air inlet valve far enough to reduce the suction power. Opening the air inlet valve reduces the power to the tool being used. Park-System (cannot be used with Powerbrush SEB 228 / EB03 and SEB 236 / EB01) The Park system allows you to conveniently park the wand and floor brush on the vacu
ページ18に含まれる内容の要旨
Maintenance and care Purchasing new dustbags and Turn off and unplug the vacuum filters cleaner before performing any Original Miele dustbags and filters can maintenance work. be purchased from an authorized Miele vacuum dealer or by visiting the Miele The Miele filter system consists of the store at www.mieleusa.com. following three components. – Dustbag Which dustbags and filters are – Exhaust filter the right ones? – Dust compartment filter This vacuum cleaner uses Original Miele dustbags Ty
ページ19に含まれる内容の要旨
Maintenance and care When to change the dustbag Change the dustbag when the colored marker in the airflow indicator fills the display. Miele dustbags are disposable and made to be used only once. Do not attempt to reuse. Checking the airflow indicator Attach the standard floor brush (depending on model) to the vacuum cleaner. Perform this test with the standard floor brush only, since other How the airflow indicator works attachments can affect the function of The airflow indicator is designed
ページ20に含まれる内容の要旨
Maintenance and care Replacing the dustbag Open the dust compartment lid and raise until it clicks into place. The dustbag has a closing flap which closes automatically when the dust compartment lid is raised to prevent any dust from escaping. Grasp the finger grip and pull the dustbag out of the holder. Insert the new dust bag as far as it will go into the dustbag holder. Do not unfold the dustbag when taking it out of the box. Unfold the dustbag in the dust compartment. Close the dus
