ページ1に含まれる内容の要旨
Owner's
Manual
Wet/Dry Vacuum
Model XSV10
FOR COMMERCIAUNDUSTRIAL USE
Makita Limited One Year Warranty
Every Makita tool is thoroughly inspected and tested before leav-
ing the factory. It is warranted to be free of defects from work-
manship and materials for the period of ONE YEAR from the
date of original purchase. Should any trouble develop during this
one-year period, return the COMPLETE tool, freight prepaid, to
one of Makita's Factory or Authorized Service Centers. If inspec-
ページ2に含まれる内容の要旨
When using an electrical appliance, basic precautions should always be followed, including 12. Do not use without dust bag and/or filters in place. the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. 13. Tum off all controls before unplugging. .~ ~ 14. Use extra care when cleaning on stairs. A WARN I NG - TO REDUCE THE RISK OF FIRE, ELECTRIC 15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas SHOCK OR INJURY: where they may be presen
ページ3に含まれる内容の要旨
Caution: Before plugging vacuum into outlet, make sure outlet voltage is same as voltage TION AND CLEANING OF THE CARTRIDGE FILTER. rating given on vacuum nameplate. 1. Insert the large end of the hose into the side inlet fitting. a CAUTION -KEEP FILTERS CLEAN. 2. Attach cleaning tools to the other end of the hose. 3. Prepare the unit for Dry Pick-Up or Wet Pick-Up as follows: Efficiency of the vacuum is largely dependent on the cartridge filter. A clogged filter can cause overheating an
ページ4に含まれる内容の要旨
Dolly Assembly a. Remove head from tank and place tank upside down on a flat surface. b. Place wheels on rear frame/axle assembly with extended hub towards dolly frame and place cap nut on axle and secure with hammer. c. Insert caster socket into front frame and secure with philips head screw. d. Place groove in front frame into lip of tank and position so frame is directly above inlet. e. Position grooves of rear frame on lip of tank and align so rear and front frames engage. 7 -L-F f
