ページ1に含まれる内容の要旨
LIMITED 90-DAY CONSUMER WARRANTY
LIMITED TWO-YEAR CONSUMER WARRANTY WITH PURCHASE AND INSTALLATION BY A
PRECISION POWER AUTHORIZED DEALER
Precision Power promises to the original purchaser, to repair or replace this product with a new or
refurbished unit (at Precision Power’s sole and absolute discretion) should it prove to be defective in
workmanship or material under normal use, for a period of *two-years from the date of purchase
from the Precision Power authorized dealer, PROVIDED th
ページ2に含まれる内容の要旨
SEDONA PASSIVE CROSSOVER (COVERS REMOVED) WIRING DIAGRAM Contents Introduction………………………………………...3 Practice Safe Sound! What’s In the Box Installation………………………………………….4 Tools of the Trade Speaker Mounting Locations TW- TW+ W- W+ IN- IN+ Door Mounting……………………………………..5 Rear Deck Mounting Installing the Mid-bass Radio or Amplifier Installing the Mid-bass (cont.)……………………6 Surface Mounting the Tweeter…………………...7 Flush Mounting the Tweeter, Fixed Panel………8 No
ページ3に含まれる内容の要旨
INSTALLING THE CROSSOVER INTRODUCTION Thank you for your purchase of this Sedona Series Compo- Step 1: Find a location for the crossover away from any fac- nent Loudspeaker System from PrecisionPower™. Our engi- tory or aftermarket electrical wires. It is recommended to neers have combined state of the art materials such as mount the passive crossover close to the amplifier. formed prolypropylene cones and mylar dome tweeters with cutting edge industrial design to achieve competition-r
ページ4に含まれる内容の要旨
INSTALLATION The performance of your new PrecisionPower Component FLUSH MOUNTING THE TWEETER Loudspeaker system is directly proportional to the quality of FIXED PANELS installation. Care taken during the installation process will be rewarded with years of satisfying performance. If you are un- Step 1: Determine the tweeter mounting location, then route sure about your installation capabilities, please refer to your the wires from the crossover to the tweeter location. local Authorized
ページ5に含まれる内容の要旨
DOOR MOUNTING When considering possible speaker locations in the doors, be FLUSH MOUNTING THE TWEETER sure to check the operation of the window mechanism and all REMOVABLE PANELS other moving parts inside the door. Most vehicles use a stabi- lizer stop bar in between the door and the door jamb. This Step 1: Determine the tweeter mounting location, then route bar prevents the door from opening too far, but may intrude the wires from the crossover to the tweeter location. into the speak
ページ6に含まれる内容の要旨
Step 4: [Skip this step if using correctly sized factory loca- SURFACE MOUNTING THE TWEETER tions] Cut the hole for the speaker. A hole can be cut either Step 1: Determine the tweeter mounting location, then route with a pair of metal tin snips, an air or jig saw, or with a hole the wires from the crossover to the tweeter location. saw corresponding to the size of the woofer listed below. • 5 5/8” Hole Saw (6½” woofer installation) Step 2: Place the surface mount housing against the p
