ページ1に含まれる内容の要旨
Self-Propelled
™
WindTunnel
with Powered
Hand Tool
by HOOVER®
®
™
This WindTunnel vacuum
cleaner takes HOOVER® Type “Y”
Allergen Filtration filter bags
This product was designed for easy
Assembly (See page 3)
ページ2に含まれる内容の要旨
Review this manual before Owner’s Manual ENGLISH pp.1-14 operating cleaner ESPAÑOL pág. 15-22 FRANÇAIS p. 23-30 Fill in and retain The model and serial number are located on the back of the handle as shown. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information. Your cleaner is model___________________________________ and has serial number___________________________________ It is suggested that you attach your sales r
ページ3に含まれる内容の要旨
Index Assembling Cleaner............................................................3-4 Carton Contents ..................................................................3 How To Use Cleaner Descriptions ..........................................................5 Cleaning Tools..................................................................7-8 TM Embedded Dirt FINDER Feature......................................6 Upright Cleaner ................................................................5
ページ4に含まれる内容の要旨
1-4 1-3 STEP I Attach handle 1-2 D B A C Remove switch lock (B) above ON- Slide handle into back of cleaner. OFF switch (C) on front of handle by Push screws into holes on back of pulling it straight out. Dispose of handle. Looking at the back of the cleaner, lock. Using a Phillips screw driver, tighten make sure switch (A) is in the OFF If switch lock has come off during screws securely. position. assembly, make sure switch is in OFF position (down) before plug- ging cord into electrical ou
ページ5に含まれる内容の要旨
2. How to use Cleaner description The assembled cleaner will 13.Carpet height control: 2-1 look like the drawing. slide knob to correct 1 setting for height of 1. Handle carpet being cleaned. 2 2. Self-propel button 14.Headlight 3 3. ON-OFF switch 15.‘Dirt FINDER’ display* ’ 4. Hose 16.Embedded ‘Dirt FINDER 5. Tool cover sensitivity switch* 5 6 6. Powered hand tool 17. Check bag indicator 4 7. Final filter door 18. Bag door 8. Handle release lever: 19.Cord hooks: wrap step on lever to lo
ページ6に含まれる内容の要旨
2-6 2-7 2-5 A B BRUSH ROLL AUTOMATIC CARPET HEIGHT BRUSH ROLL ON OFF ON OFF TM Handle positions Carrying cleaner Embedded Dirt FINDER The handle of your cleaner has three The cleaner can be moved by using feature (some models only) positions; upright for storage and when the carrying handle located on the back With red and green lights (A), the ‘Dirt using cleaning tools; operating posi- of the cleaner. FINDER’ system alerts the user to areas tion for general operation on carpet of
ページ7に含まれる内容の要旨
2-10 2-11 2-12 AUTOMATIC BRUSH ROLL ON OFF Cleaning lightweight Edge cleaning Automatic brush roll flexible rugs Special edge groomers are provided indicator (some models only) on both sides of the front of the cleaner Stand on one end of rug and move When red is in the OFF window, brush to remove dirt in carpet near base- cleaner toward other end or edge. roll is STOPPED. boards and furniture. Before reaching edge, push down on When red is in the ON window brush roll handle. This will lif
ページ8に含まれる内容の要旨
Extra reach hose* 2-16 2-18 The extra reach hose provides an extra 20 foot reach for easier cleaning of stairs H G and hard to reach high places. J 2-17 I Slide hose into (J) and twist hose to lock Attach wand and it into place. tools J (To detach hose, reverse procedure.) Attach any tool or wand to the hose (G) by pushing it firmly into hose. Attach wands or tools to the other end of hose. Attach hose Attach second wand or tool to wand (H) by pushing it firmly onto the wand. Push ON/OFF swit
ページ9に含まれる内容の要旨
It is imperative that you use only gen- Where to buy 3-2 uine HOOVER filter bags made by The Filter bags may be purchased from Hoover Company to assure your clean- Authorized Hoover Dealers (Depot), er operates at peak performance. A Leading Retailers, from Hoover Factory HOOVER bags can be identified by these trademarks — Service Centers, or through The Hoover Company on-line at www.hoover.com. ® What to buy B ® To assure cleaning effectiveness, use only Genuine HOOVER® Allergen Changing filter
ページ10に含まれる内容の要旨
Check brush roll chan- Headlight replace- 3-6 ment nels Because your WindTunnel™ cleaner What to buy picks up so well, we strongly recom- C This cleaner uses a 12 volt, wedge base mend you check for debris accumulation type 912 bulb, Hoover part No. in the channels next to the brush roll 27313101. when you check the filters. Removing this debris will help maintain you clean- 3-7 er’s excellent pick up and suction. Remove debris as follows: Disconnect cleaner from electrical outlet. How to reatt
ページ11に含まれる内容の要旨
Brush roll replacement 3-13 3-14 Replacing bottom plate To check condition of brushes, move Reposition bottom plate and 4 Phillips the edge of a card across bottom plate When to replace head screws. Tighten screws securely. while turning brush roll. To maintain Disconnect cleaner from electrical cleaning effectiveness, replace brush outlet. roll if brushes do not touch card. Warning - Brush roll can start suddenly. Unplug cleaner when it What to buy is turned over. When purchasing a new brush
ページ12に含まれる内容の要旨
Powered hand tool 3-21 3-20 B Agitator brush roll C replacement D When agitator brush roll brushes are worn, the brush roll should be replaced. Ask for HOOVER part No. 48414088. 3-19 A C 3. Remove agitator including end plates 2. Unscrew the two Phillips screws and (C) and discard. remove belt guard (B). 4. Inspect belt to ensure that it is in good condition. If belt is cracked, gouged or broken, replace it (see follow- ing section). 5. Insert brush roll through belt and posi- How to replace tio
ページ13に含まれる内容の要旨
Edge groomer Lubrication 4. Trouble shooting replacement The motor is equipped with bearings that contain sufficient lubrication for the life of When to replace If a minor problem occurs, it usually can the motor. The addition of lubricant The edge groomers, located on both be solved quite easily when the cause could cause damage. Therefore, do sides of the front of the cleaner, should is found by using the checklist below. not add lubricant to motor bearings. be replaced when they appear worn.
ページ14に含まれる内容の要旨
Problem: Powered hand tool brush roll Full One Year 4-2 won’t turn Warranty F Possible Cause (Domestic Use) Possible Solution Your HOOVER® appliance is warranted • Too much pressure being applied to in normal household use, in accordance tool with the Owner’s Manual against original • Continue using tool applying light defects in material and workmanship for pressure H a period of one full year from date of purchase. This warranty provides, at no • Blockage in turbine channel G cost to you,
ページ15に含まれる内容の要旨
Lea este manual antes de Manual del usuario ENGLISH pp.1-14 usar la aspiradora ESPAÑOL pág. 15-22 FRANÇAIS p. 23-30 Anote y guarde El modelo y número de serie se encuentran en la parte posterior del mango, como se muestra. Para sus registros personales, por favor anote los números COMPLETOS de modelo y de serie en los espacios provistos y guarde esta información. Su aspiradora es modelo___________________________________ y tiene el número de serie___________________________________ Se su
ページ16に含まれる内容の要旨
para muebles (J) en el compartimiento de Indice PASO I Ensamble el almacenamiento en la parte posterior de la Cómo ensamblar la aspiradora ............16 mango aspiradora. Contenido de la caja ..........................16 Cómo usar 1-2 1-10 Descripción de la aspiradora ......16-17 Mirando la parte trasera de la Abra la cubierta de los accesorios. Accesorios de limpieza......................18 aspiradora, asegúrese que el interruptor El accesorio eléctrico de mano viene en Detector Embedded Dirt
ページ17に含まれる内容の要旨
Haga funcionar la aspiradora solamente al 2-5 2-8 voltaje especificado en la placa de datos Para transportar Ajuste según la que se encuentra en la parte inferior de la altura de la alfombra La aspiradora también se puede aspiradora. En caso de ser necesario elevar y bajar el transportar usando el mango transportador Esta aspiradora está diseñada para uso frente de la aspiradora para las distintas ubicado en la parte trasera. alturas del pelo de la alfombra, deslice el doméstico. botón controlad
ページ18に含まれる内容の要旨
Mueva hacia atrás la aspiradora para C. Boquilla para muebles - se puede usar 2-19 comenzar nuevamente, baje el frente de la para muebles tapizados, cortinajes, Indicador de aspiradora, y diríjala solamente hacia colchones, ropa, interior de automóviles y "revisar la bolsa" adelante. escaleras alfombradas. (Sólo algunos modelos) D. Boquilla para hendiduras - se puede El indicador (I) se pone de color rojo cuando la bolsa de filtro está llena de usar en espacios estrechos, rincones y a lo 2-12 p
ページ19に含まれる内容の要旨
solamente bolsas de papel originales No. de pieza 38765019 HOOVER. Vuelva a colocar la placa inferior (Fig. 3- HOOVER fabricadas por The Hoover 13). Company. Las bolsas de papel HOOVER se identifican por estas marcas 3-5 Cómo cambiar el filtro Reemplazo del foco comerciales - final delantero El filtro final ayuda durante el proceso de filtración para devolver el aire puro a la Qué comprar ® habitación. Esta aspiradora usa un foco 912 de 12 ® voltios, con base de cuña pieza no. El filtro tablead
ページ20に含まれる内容の要旨
de HOOVER. Cómo quitar la placa inferior 3-15 Colocación del rodillo Desenchufe la aspiradora de la toma de Cómo reemplazarlo de escobillas corriente. Cómo sacar el rodillo de 3-9 3-19 Advertencia: El rodillo de escobillas 1. Desprenda el accesorio de la escobillas puede empezar a girar manguera y voltéelo de manera que la Deslice el botón controlador del rodillo (Fig. repentinamente. Desenchufe la parte inferior esté hacia arriba. Oprima las 2-9) a la posición "Hard" (pisos desnudos) aspirador
