ページ1に含まれる内容の要旨
Owner’s Manual
Dubl•Duty™
Wet & Dry Cleaner
Thank you for selecting a HOOVER product.
This cleaner was inspected and packaged carefully before being
shipped from the factory. If you should happen to need assistance
during assembly or operation, call
1-800-944-9200 for automated referral of authorized service
outlet locations (U.S. only) or
1-330-499-9499 to speak with a representative in our
Consumer Response Center.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
Review this manual before
op
ページ2に含まれる内容の要旨
Fill in and retain The model and serial number are located on the bottom of the cleaner motor housing. For your personal records, please enter the COMPLETE model and serial num- ber in the spaces provided and retain this information. Your cleaner is model___________________________________ and has serial number___________________________________ It is suggested that you attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warranty service of your
ページ3に含まれる内容の要旨
Questions or concerns? The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its use. Look on the list provided with the product for your local Hoover Factory Service Center or in the Yellow Pages under “Vacuum Cleaners – Household” for the nearest Authorized Hoover Warranty Service Dealer (depot) or call: 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR 1-330-499-9499 to speak with a representative in t
ページ4に含まれる内容の要旨
Mounting wall bracket 1-3 1-5 1-4 A Position crevice tool and squeegee into The wall bracket, included with your Hold bracket against wall in desired deluxe wall bracket as shown. cleaner, is designed for both storing and location and mark center of each hole. recharging the cleaner. Choose a con- Drill a 1/8” diameter starter hole in cen- venient place where the bracket can be ter of each mark. mounted in a vertical position (with hook If wall bracket is being mounted onto pointing up) and wi
ページ5に含まれる内容の要旨
2. How to use Remove the cleaner from wall bracket 2-1 2-2 and depress ON/OFF switch to operate. Release switch to turn cleaner off and to conserve power between tasks. Cleaning tools A (available with deluxe model) The cleaning tools added to the multi- purpose nozzle make it easy to com- plete the following tasks: B Attach either tool to cleaner by pushing Crevice tool: (A) may be used tool firmly into nozzle. Remove tool by for wet or dry pick-up in tight spaces, pulling straight out. corner
ページ6に含まれる内容の要旨
3. Maintenance Familiarize yourself with these home 3-1 3-2 maintenance tasks and keep this owner’s manual in a convenient place where you can refer to it when needed. Proper use and care of your cleaner will ensure con- tinued cleaning effectiveness. A With collector cup in hand, grasp center Emptying collector cup ribs of filter and lift out filter / separator The dirt, liquid and wet debris picked up assembly. by your cleaner is deposited into the Empty collector cup. collector cup. Empty c
ページ7に含まれる内容の要旨
3-6 3-7 3-8 Align filter frame with separator frame Replace filter / separator assembly into Reattach cup assembly to motor as and press edges together. collector cup. shown. If soiled, wipe motor/handle section with Hang cleaner back on wall bracket for a damp cloth. Do not immerse in storage and recharging. water. 3-9 3-10 3-11 E Battery disposal How to remove battery Unscrew the 4 Phillips head screws on motor/handle section. Your cleaner contains nickel-cadmium pack batteries. Note: Do not r
ページ8に含まれる内容の要旨
The RBRC Battery Recycling seal on the Full One Year Problem: Cleaner won’t pick-up nickel-cadmium (Ni-Cd) battery con- tained in this product indicates The Warranty Possible cause Hoover Company is voluntarily partici- Possible solution (Domestic Use) pating in an industry program to collect and recycle these batteries at the end of • Collector cup full Your HOOVER® appliance is warranted their useful life, when taken out of ser- in normal household use, in accordance • Empty cup vice in the U
ページ9に含まれる内容の要旨
HOOVER and are registered trademarks THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 R2 11-98 S1112/-050, S1117-900/-950 Printed in China 59139-218
