ページ1に含まれる内容の要旨
Cordless Hand Sweeper
OWNER'S MANUAL
Model V1707H
4.8 Volt DC
EURO-PRO Operating LLC Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel: 1 (800) 798-7398
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
V1707H IMPORTANT SAFEGUARDS When using an electrical appliance, basic safety precautions should always be observed, ONE (1) YEAR LIMITED WARRANTY including the following: EURO-PRO Operating LLC warrants this product to be free from defects in material and READ ALL INSTRUCTIONS BEFORE USING YOUR CORDLESS HAND SWEEPER. workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and excep
ページ4に含まれる内容の要旨
Care and Maintenance To improve the performance and life of your unit, we recommend you do the following: 1. Once a month clean the unit with a dry cloth, including the chamber into which the dust tray fits. Remove any hair, fiber or other materials that CORDLESS HAND SWEEPER may have built up in the chamber and on the rotating brush. 2. Don't use abrasive materials to clean the hand sweeper. Do not immerse Model V1707H the unit in water. 4.8 Volt DC 3. Do not pick up liquids or use on wet
ページ5に含まれる内容の要旨
HOW TO OPERATE YOUR CORDLESS HAND SWEEPER Battery Removal & Disposal Before you start: NOTE: If uncertain as to how to remove your battery pack, we suggest Your Cordless Hand Sweeper will require very little assembly. You should you take your sweeper to a reputable small appliance service remove it from the carton and familiarize yourself with all the components listed technician to have this service performed. as per the parts drawing (pg.2) This will help you in the assembly and operation
ページ6に含まれる内容の要旨
CHARGING THE CORDLESS HAND SWEEPER CLEANING THE DUST TRAY 1a. Connect the charger plug to the charging jack or hole on the back of the hand sweeper. Plug the the charging adapter into the wall outlet. (120V.,60Hz.) Use only the charger supplied by the manufacturer, rated output DC 6V, 100mAh. (Fig. 7) To achieve the best performance, empty the dust tray after each use. OR 1b. Connect the charger plug on the charging jack of charging stand (Fig. 8). 1. Pull the dust tray straight out f
