ページ1に含まれる内容の要旨
2 in 1 Stick and Hand Vac
Owner’s Manual
Model: EP664
120V., 60Hz., 5 Amps
U.S : EURO-PRO Operating LLC Canada : EURO-PRO Operating LLC
94 Main Mill Street, Door 16 4400 Bois Franc
Plattsburgh, NY 12901 St-Laurent, QC H4S 1A7
1 (800) 798-7398
www.sharkvac.com
Copyright © EURO-PRO Operating LLC 2006
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Model EP664 IMPORTANT SAFETY INSTRUCTIONS ONE (1) YEAR LIMITED WARRANTY When using your Vacuum basic safety precautions should always be observed, including the following: EURO-PRO Operating LLC warrants this product to be free from defects in material and 1. Read all instructions before using your To reduce the risk of fire, electric shock, or workmanship for a period of one (1) year from the date of the original purchase, when utilized for vacuum. injury: normal household use, subject t
ページ4に含まれる内容の要旨
PARTS AND COMPONANTS ORDERING REPLACEMENT DUST CUP FILTER TO ORDER REPLACEMENT FILTER for Model EP664 1. Floor Nozzle Call: 1 (800) 798-7398 2. Air Intake Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time 3. Dust Cup Release Button or 4. On/Off Switch visit our website: www.sharkvac.com 5. Vacuum Handle 6. Power Cord Holder 7. Handle Release Button FOR TECHNICAL SUPPORT 8. Power Cord for Model EP664 9. Hand Vac Handle Call: 1 (800) 798-7398 10. Dust Cup Filter Monday to Friday 8:30 A
ページ5に含まれる内容の要旨
OPERATING INSTRUCTIONS PRECAUTIONARY MEASURES Motor Thermostat • If clogged hose or filter is found, IMPORTANT: If the suction opening in the unit or the nozzle is BLOCKED, IMPORTANT: This unit is equipped unclog the hose and replace the switch off the vacuum cleaner and remove the blocking with a motor protective thermostat. If filters. substance before you start the unit again. for some reason the vacuum cleaner • Wait at least 45 minutes before should overheat, the thermos
ページ6に含まれる内容の要旨
Lower OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Attaching the Crevice Brush to 2. Empty the dust from the dust cup Warning: Always remove the power Using the Unit as an Upright container. (Fig. 8) the Hand Vac plug from the wall outlet before • Ensure that the dust cup filter is • Hold the end of the crevice brush. assembling or removing accessories. installed in the dust cup container. Insert the crevice brush into the air • Unwind the power cord Inserting the Vacuum Handle into intak
