ページ1に含まれる内容の要旨
Turbo Stick Vac
OWNER’S MANUAL
Model EP600
120V., 60Hz., 7.5 Amps.
For information or assistance:
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1 866 98SHARK (74275)
www.sharkvac.com
ページ2に含まれる内容の要旨
Model EP600 ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid t
ページ3に含まれる内容の要旨
TROUBLE SHOOTING GUIDE IMPORTANT SAFETY INSTRUCTIONS When using your SHARK TURBO STICK VAC basic safety precautions should PROBLEM POSSIBLE REASON POSSIBLE SOLUTION always be observed, including the following: To reduce the risk of fire, electric shock, or 1. Read all instructions before using your 1. Plug unit in firmly. SHARK TURBO STICK VAC. injury: 1. Power cord not firmly plugged into 2. Check fuse or breaker. Replace 2. Use the system only for its intended use. • Do not leave the SHA
ページ4に含まれる内容の要旨
GETTING TO KNOW YOUR SHARK TURBO STICK VAC OPERATING INSTRUCTIONS cont. Replacing The Dust Cup Into The Attaching the Shoulder Strap Unit Use the hooks to attach the shoulder • Hold the dust cup in your hand. strap to the vacuum cleaner. • Make sure that the slot on the bottom Connect the dog leash swivel hooks of the cup is pointed in the same to the eyelets located near the top of direction as the pins in the unit (see the unit handle and at the base of the drawing #1). unit. Adjust t
ページ5に含まれる内容の要旨
OPERATING INSTRUCTIONS cont. PRECAUTIONARY MEASURES NOTE: Always turn off the power switch 4. Reassemble the debris screen to the IMPORTANT: If the suction opening in the unit or the hose is BLOCKED, switch off and unplug the electrical cord before HEPA-Type filter cartridge and the vacuum cleaner and remove the blocking substance before you start the unit emptying the Dust Cup. replace into dust cup (container). again. Ensure that the filter assembly is Cleaning & Changing the HEPA- 1.
ページ6に含まれる内容の要旨
lower OPERATING INSTRUCTIONS cont. OPERATING INSTRUCTIONS Crevice Tool WINDING & UNWINDING THE NOTE: Always remove the power plug ATTACHING THE HOSE TO THE For radiators, crevices, corners, POWER CORD from the wall outlet before assembling or MAIN BODY baseboards and removing accessories. • To wind the cord between cushions. • Press in the pin at the end of the after usage, follow INSERTING THE 2-PIECE METAL hose (see illustration below). the illustration below. HANDLE INTO THE MAIN BOD
