ページ1に含まれる内容の要旨
Earn BISSELL Rewards! Earn BISSELL Rewards!
R Register your egister your
product today! product today!
See details on See details on
back page back page
®
®
USER'S GUIDE
58F8, 18M9, 84G9, 26T5 SERIES
2
Thank You
3
Safety Instructions
4
Product View
5
Assembly
6-8
Operations
8-11
Maintenance and care
12
Troubleshooting
13
Replacement Parts
14
Accessories
15
Warranty
16
Consumer Services
ページ2に含まれる内容の要旨
Thanks for buying a BISSELL vacuum We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this com- plete, high-tech home cleaning system. Your BISSELL vacuum is well made, and we back it with a limited three year warranty. We also stand behind it with a knowledgeable, dedicat- ed Consumer Services department, so, should you ever have a prob- lem, you’ll receive fast, considerate assistance. My great-grandfather invented the flo
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appli- ■ Turn off all controls before plugging or ance, basic precautions should be unplugging vacuum cleaner. observed, including the following: ■ Use extra care when cleaning stairs. ■ Do not pick up flammable materials Read all instRuctions (lighter fluid, gasoline, kerosene, etc.) or befoRe using youR use in the presence of explosive liquids or vapors. upRight V acuuM. ■ Do not pick up toxic material (chlorine Always connect to
ページ4に含まれる内容の要旨
Product view Handle Stretch Hose ® TurboBrush Hose Clip Tool Clean Carpet Sensor (select models only) Clean Filter Indicator (select models only) Quick Carrying ® Reach Handle Crevice Tool Handle Extension Combination Wand Dusting Brush/ ™ Easy Empty Upholstery Tool Dirt Container HEPA Media Filter* Filter Cup Washable Hose Filter Wand Automatic Lock ’n Cord Rewind ™ Seal Lever Handle Release Headlight Hose Pedal Wand Base Foot Hose Height Powerfoot Furniture Protection A
ページ5に含まれる内容の要旨
Assembly you need: philips head screwdriver. 2. attach handle to vacuum 1. Locate the vacuum handle and remove the screw packet taped to the base of the handle. 2. Stand the vacuum upright and slide the base of the handle firmly into the grooves 4. at the top of the vacuum body. 3. Check to be sure the handle is fitted to the vacuum body. If there is a gap in front, continue to push firmly until the handle is flush. 4. Insert the screw provided from the screw packet into the existing hol
ページ6に含まれる内容の要旨
Operations automatic cord Rewind 1. Gently pull out power cord and stop when yellow line is visible. Do not pull power cord beyond the red line. Plug cord into electrical outlet. 2. To return cord, turn vacuum power switch OFF, and remove plug from outlet. Hold plug and press automatic cord button to wind cord into reel. Do not allow plug to whip when rewinding. power switch the power switch is located just below the handle on the side of the vacuum. i -on o- off handle position pres
ページ7に含まれる内容の要旨
Operations clean carpet sensor (select models only) clean carpet sensor detects dirt and debris being picked up while vacuum is Clean Carpet Sensor in use. Red light: Vacuum picking up dirt. alternate to green and Red: Slightly soiled area. green light: Vacuum detects clean area. c lean filter indicator (select models only) the indicator tells you when the air flow in your vacuum is reduced due to dirty filters or a clog in the hose. the indicator will remain green until the air flow i
ページ8に含まれる内容の要旨
Operations empty dirt container empty when dirt reaches the “full” line on the container. Full Line 1. Turn power OFF. Unplug power cord from electrical outlet. 2. Slide Lock ‘n Seal lever to “Unlock” position. Unlock Position Lock Position 3. Grasp dirt cup handle portion and pull straight out to remove from vacuum and empty. 3. 4. Place dirt container back in the vacuum and slide lever to lock position. note: the dirt container may be washed in warm water with mild detergent. Make sure
ページ9に含まれる内容の要旨
Maintenance and care cleaning the inner & outer circular filter continued 4. Separate the outer foam filter and inner pleated circular filter. Wash each individually by hand in warm water. Mild detergent may be used if desired. Rinse well; let filters com- pletely air dry before replacing in filter cup. 5. Wash filter cup in warm water with mild detergent. Completely air dry before reassembling with filters. do not put in dishW asheR. 6. 6. The upper tank and louvers can be wiped cle
ページ10に含まれる内容の要旨
Maintenance and care checking rotating floor brush and drive belt check your vacuum’s rotating floor brush and drive belt regularly for 3. wear or damage. 1. Turn power OFF. Unplug vacuum cord from electrical outlet. 2. Place handle in low position and turn vacu- um over so bottom side is facing up. 3. Using a screwdriver, remove the five screws and lift brush cover off. Brush Cover 4. 4. Grasp rotating floor brush at both ends and lift. Motor Pulley 5. Clean strings, hair and other d
ページ11に含まれる内容の要旨
Maintenance and care clearing a clog low suction or poor pickup may be due to a clog in the vacuum. if you notice a change in the sound of the vacuum motor, check for clogs. 3. 1. Turn power OFF. Unplug vacuum cord from electrical outlet. Suction inlet 2. Empty dirt container. 3. Check upper tank and suction inlet for clogs. 4. Grasp Quick Reach Handle and remove hose wand from base to check for clogs in the base, the wand, and the hose. 5. Remove the screw attaching the hose wand base t
ページ12に含まれる内容の要旨
Troubleshooting Vacuum cleaner won't turn on possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker 3. Damaged cord 3. Refer to a BISSELL authorized service center for repair or replacement Vacuum cleaner won't pick up possible causes Remedies 1. Incorrect height adjustment 1. Adjust powerfoot to correct height setting 2. Hose not attached to suction opening 2. Grasp quick reach handle and firmly p
ページ13に含まれる内容の要旨
Replacement parts Item Part No. Part Name 1 32074 Style 9 Drive Belt (2-Pack) 2 203-1297 Standard Headlight Bulb 3 203-2450 Hose Assembly (84G9/18M9/26T5 series) 4 203-2468 Hose Assembly (58F8 series) 5 203-2449 Brush Dowel (15") 6 32R9 Style 16 Inner and Outer Circular Pre-Motor Filter Set 7 73K1 Style 16 Inner Circular Pre-Motor Filter 8 69B1 Style 16 Outer Circular Pre-Motor Filter 9 32076 Style 7/9/16 Post-Motor Filter 10 203-1215 Style 7/9/16 Pre-Motor Filter 1 2 3/4 5 6 7 8
ページ14に含まれる内容の要旨
Accessories these items are available for purchase as accessories for your bissell vacuum: to purchase call 1-800-237-7691 or visit www.bissell.com. Item Part No. Part Name 1 203-2447 TurboBrush Tool 2 203-1063 Crevice Tool 3 203-1099 Combination Dusting/Upholstery Brush 4 203-1084 Extension Wand 1 2 3 4 14 www.bissell.com 800.237.7691
ページ15に含まれる内容の要旨
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. limited three y ear Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc. will repair or replace
ページ16に含まれる内容の要旨
Don't forget to register your product! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: bissell Rewards points Automatically earn points for discounts and free shipping on future purchases. faster service Supplying your information now saves you time should you need to contact us with questions regarding your product. product support Reminders and alerts We’ll contact you with any important product maintenance reminders and alerts. special
