ページ1に含まれる内容の要旨
Earn BISSELL Rewards!
Register your
product today!
See details on
back page
USER'S GUIDE
47B2, 20R7, 40H5 and 40N7 SERIES
2
Thank You
3
Safety Instructions
4
Product View
5
Assembly
5-7
Operations
8
Maintenance and Care
9
Troubleshooting
10
Replacement Parts
10
Accessories
11
Warranty
12
Product Registration
12
Consumer Care
ページ2に含まれる内容の要旨
Thanks for buying a BISSELL Deep Cleaner We’re glad you purchased a BISSELL Deep Cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL Deep Cleaner is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invente
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS ■ When using an electrical appliance, basic close attention is necessary when used by precautions should be observed, including the or near children. following: ■ Keep appliance on a level surface. ■ turn off all controls before unplugging. Read all instRuctions befoRe using ■ be extra careful when cleaning stairs. youR deeP cleaneR WARNING: SAVE THESE To reduce the risk of fire, electric shock, or injury: INSTRUCTIONS. ■ do not immerse. ■ use only
ページ4に含まれる内容の要旨
Product view Spray Trigger Upper Handle Retractable handle lock Power Cord Solution Upper Body Tank Collection Vent Cover Tank Latch ( Foam Filter) WARNING: to reduce the risk of fire and electric shock due to internal Removable component damage, use only Nozzle Collection bissell cleaning fluids intended Tank Latch for use with the deep cleaner. Cleaning fluid Keep plenty of genuine bissell 2X formula on hand so you can clean and protect whenever it fits your schedule. always u
ページ5に含まれる内容の要旨
Assembly Your deep cleaner assembles quickly and 2. 3. easily. The only tool you will need for assembly is a Phillips head screwdriver. 1. locate the screw pack, which is taped to the upper handle. 2. slide the upper body onto the lower body, taking care not to leave a gap between the upper and lower body. 3. firmly holding the upper body, screw the 2 screws into the holes marked with arrows. 4. TIP: if you are having difficulty tightening the screws, remove, re-insert, and tighten ag
ページ6に含まれる内容の要旨
Operations Fill the tank continued 3. fill with hot (not boiling) tap water to the 3. 4. WateR line. fill the rest of the tank with bissell 2X formula to the foRmula line. Replace and tighten the black cap. Caution: Do not microwave or boil water before filling. 4. Place solution tank on lower body. Tip: to ensure proper function, make sure the tank is completely seated. failure to do so can result in reduced or no spray. 3. 2. Carpet cleaning 1. Plug into proper outlet. 2. adjust the re
ページ7に含まれる内容の要旨
Operations Empty the collection tank continued 4. Rinse collection tank thoroughly and replace 2. 4. on unit. 5. Refill solution tank and continue cleaning. Hard floor cleaning (select models only) 1. Remove the collection tank (refer to steps 2a and 2b on page 6). 2. attach the hard floor tool by hooking it WARNING: into the front of the removable nozzle and to reduce the risk of fire and rotate until it snaps firmly in place. electric shock- when cleaning 3. Replace the collection tank.
ページ8に含まれる内容の要旨
Maintenance and care Machine storage For best results, a few simple steps WARNING: can assure your machine is well main- To reduce the risk of injury tained after your cleaning is complete. from moving parts and/or electrical shock, turn power 1. Wrap power cord around Quick Release switch OFF and disconnect cord Wrap™ on side of the machine. plug from electrical outlet 2. Wipe all surfaces with a soft cloth. store before performing mainte- cleaner upright in a protected, dry area. n
ページ9に含まれる内容の要旨
Troubleshooting Reduced Spray OR No Spray Possible causes Remedies 1. Solution tank empty 1. Refill tank with water and formula 2. Lint screen on solution tank cap clogged 2. Soak solution tank cap in warm water and then rinse under running water 3. Spray Nozzle Clogged 3. Clean Spray nozzle by rinsing under water 4. Upper handle is not in the upright and locked position 4. Rotate the retractable handle lock, pull handle up and return the handle lock to the locked position. 5. Upper b
ページ10に含まれる内容の要旨
Replacement parts - BISSELL ReadyClean Below please find a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. Item Part No. Part Name 1 203-5661 solution t ank (includes cap and insert assembly) 2 203-5695 collection t ank) ® 3 203-5546 dirtlifter Powerbrush (47b2 & 20R7 series) 4 203-5545 cross action brush (40n7 & 40h5 series) 5 203-5679 nozzle 6 203-5549 belt 7 203-5541 solution
ページ11に含まれる内容の要旨
Warranty - BISSELL ReadyClean this warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. if you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer care by e-mail, t elephone, or regular mail as described below. Limited One Year Warranty subject to the *eXcePtions and eXclusions identified below, upon receipt of the product bissell will repair or replace
ページ12に含まれる内容の要旨
Don't forget to register your product! Registering is quick, easy and offers you benefits over the lifetime of your product. you’ll receive: BISSELL Rewards Points automatically earn points for discounts and free shipping on future purchases. Faster Service supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts. Special
