ページ1に含まれる内容の要旨
USER’S GUIDE
9200, 9400 SERIES 220-240V
3 Safety Instructions
4-5 Product View / Accessories
6 Assembly
7-18 Features / Operations
19-20 Troubleshooting
21 Consumer Services
22-23 Replacement Parts
24 Warranty
ug310-5880_9200E_406.indd 1 ug310-5880_9200E_406.indd 1 6 6/9/06 4:25:27 PM /9/06 4:25:27 PM
ページ2に含まれる内容の要旨
Thanks for buying a BISSELL ProHeat 2X We’re glad you purchased a BISSELL ProHeat 2X heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your ProHeat 2X is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-g
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic ■ Remove plug from electrical outlet before cleaning precautions should be observed, including or maintaining the appliance the following: ■ Not intended for use by young children or infirm persons without supervision READ ALL INSTRUCTIONS ■ Young children should be supervised to ensure that they do not play with the appliance BEFORE USING YOUR ■ Do not pick up toxic material (chlorine bleach, UPRIGHT DEE
ページ4に含まれる内容の要旨
Spray Trigger Power Switch Heater Switch Extra Long Flex Hose Power Cord Upper Handle Easy Carry Handle Heat Indicator Light Tank Carry Handle Ready Tool Detent Pedal ™ Dial 2-in-1 Water Tank Lower Base Edge Sweep Brushes Easy To Remove Nozzle Optional Accessories: These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 22-23. ™ 3” Tough Stain Brush 4” Upholstery Tool 6' Stair Tool TurboBrush Hard Floor Attachment Spraying Crevi
ページ5に含まれる内容の要旨
Spray Trigger Upper Hose Rack Hose Secure Latch Upper Handle ™ TurboBrush Crevice Tool Holder Storage (select models) (select models) Lower Hose Rack Lower Base Keep plenty of genuine BISSELL Detent Pedal Deep Cleaning Formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL Deep Cleaning Formula Tank Formulas. Non-BISSELL cleaning formulas may harm the machine and void the warranty. BISSELL Formulas: These items are available for purchase. To order
ページ6に含まれる内容の要旨
How to Use this Guide This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL W ARNING: ProHeat 2X. You’ll find assembly and operating Do not plug in your instructions, safety precautions, as well as cleaner until you have maintenance and troubleshooting instructions. completely assembled it per Please read this User's Guide thoroughly before the following instructions assembling your Deep Cleaner. and are familiar with all Pay particular atten
ページ7に含まれる内容の要旨
Special Features of Your BISSELL ProHeat 2X Your BISSELL ProHeat 2X Deep Cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you, the customer, in mind. Built-in Heater BISSELL ProHeat models all feature a patented built-in heater which will heat the hand hot tap water you put in up to 25 degrees hotter to safely optimize cl
ページ8に含まれる内容の要旨
C F L L E E S O A Scotchgard Protector Applicator Tool and Scotchgard Warranty Carpet protection applied at the mill typically wears down with heavy foot traffic over time and with everyday cleaning, including deep cleaning. To help restore this important protection, BISSELL offers deep cleaning formulas with Scotchgard protector and a post-applicator to apply Scotchgard protector with the same materials used by carpet mills. This offers extra protection against dirt and tough stains to
ページ9に含まれる内容の要旨
BRUSH SUCTION Before You Clean 1. Plan activities to give your carpet time to dry. 2. Move furniture to another area if cleaning an entire room (optional). 3. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. 4. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. ATTENTION: Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same Carpet Cleaning area with an ordinary vacu
ページ10に含まれる内容の要旨
C F L L E E S O A 2 2a Carpet Cleaning (Continued) 2. Fill the formula tank. Fill up the formula tank by first unscrewing the cap and insert. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. Fill formula up to the line and replace the cap and insert. Place formula tank into the slot in the back of the machine for a 3 snug fit. OR 3. Set Custom Clean dial. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or rinse) a
ページ11に含まれる内容の要旨
Carpet Cleaning (Continued) 7 7a 7. Remove the tank from the base of the machine by lifting up on the tank carry handle. Carry like a bucket to a utility sink or outside where you will dispose of the dirty water. 7a. Unlatch the top of the tank from the bottom by lifting up on the tank latch which is located on the back of the tank. 7b. Remove the top of the tank by lifting up on the handle. 7b 7c Note how the lip on the top tank separates from the groove in the bottom tank. This placemen
ページ12に含まれる内容の要旨
After Cleaning (Continued) Machine Care 3 For best results, a few simple steps can assure Filter your machine is well maintained after your cleaning is complete. 1. Turn power and heater switches OFF (O). Unplug the machine and wrap the power cord. 2. After emptying the 2-in-1 water tank, rinse it out at a faucet with running hand hot tap water, taking care to clean underneath the heavy duty bladder and all around it. 3. The top half of the tank can be rinsed clean Tip: through the nozz
ページ13に含まれる内容の要旨
Post-Treatment Scotchgard Protector* (Optional) Some models are equipped with a Scotchgard protector post-treatment applicator and cartridge. 3 Using this, along with one of the BISSELL Deep Cleaning Formulas containing Scotchgard, to help retain the carpet cleanliness achieved with the ProHeat 2X machine. For best results, the post cleaning treatment should be applied while the carpet is still damp. It is recommended that the Scotchgard protector be applied every 12 months to all clea
ページ14に含まれる内容の要旨
Adsdfdd ghg bvh cvbbj jkn hnbj jkvh gcghhjj jhffhl kllgh Cleaning with Attachments Your ProHeat 2X machine comes equipped with a flex hose and at least one cleaning tool for cleaning stairs, upholstery, and more. 1. Important! If using to clean upholstery, check upholstery tags. A. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your ProHeat 2X. If the tag is coded with an “X” or an “S” (with a diagonal stripe through it), or says “Dry Clean Only”, do n
ページ15に含まれる内容の要旨
Cleaning Formula Section Keep plenty of genuine BISSELL Deep Cleaning Formula and Scotchgard protector post-treatment cartridges on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL Deep Cleaning Formulas. 1.42 L 1.42 L 1.42 L 1.42 L 1.42 L Fiber Cleansing Multi-Allergen Pet Odor and Soil Natural Orange Lavender Essence ™ ™ ™ ™ ™ Formula with Removal Formula Removal Formula Extract Formula with Formula with ™ ™ ™ ™ ™ Scotchgard with Scotchgard w
ページ16に含まれる内容の要旨
Hard Floor Cleaning Your ProHeat 2X model may come with a hard floor tool and Hard Floor Solutions Formula. If not, these products are available for purchase W ARNING: by contacting the BISSELL Consumer Services To reduce the risk of fire, department by phone. The hard floor tool electric shock or injury provides effective cleaning for linoleum, vinyl, unplug from outlet before and tile floors. servicing. Caution: Do not use on unsealed hardwood floors. 1. Vacuum or sweep thoroughly to
ページ17に含まれる内容の要旨
Small Belt Removal and Replacement Instructions Occasional replacement of one or both belts may become necessary. If that is needed, please follow the instructions below. W ARNING: 1. Turn off the machine, and unplug it from the outlet. To reduce the risk of fire, 2. Remove both the 2-in-1 water tank and the electric shock or injury, formula tank. Set aside. unplug from the outlet 3. Unscrew the nozzle and remove it. Set aside. before servicing. 4. Turn the machine on its side. IMPORTANT
ページ18に含まれる内容の要旨
Brush Removal and Large Belt Replacement Instructions Brushes can be removed for cleaning or replacement as needed. 1. Follow Small Belt Removal Instructions on page 17. W ARNING: 2. Remove brush rolls by pulling them off of the To reduce the risk of fire, metal rods. electric shock or injury, 3. Place cleaned or new brush rolls back onto the rods. unplug from the outlet Make sure one washer is on each end of the rollers before servicing. prior to sliding onto the rod. Be sure to let the
ページ19に含まれる内容の要旨
Troubleshooting W ARNING: To reduce the risk of fire, electric shock or injury unplug from the outlet before servicing. Built-in heater ready light does not illuminate Possible Cause Remedies 1. The heater switch is not turned ON ( I ). 1. Turn the heater switch ON ( I ). 2. The power switch is not turned ON ( I ). 2. Both switches must be ON ( I ) to activate the heater ready light. Reduced spray or no spray. Possible Cause Remedies 1. 2-in-1 water tank may be empty. 1. Fill heavy duty b
ページ20に含まれる内容の要旨
Troubleshooting (Continued) Cleaner not picking up solution Possible Causes Remedies 1. Ready Tools dial may be at wrong setting. 1. Set Ready Tools dial to either floor cleaning or hose attachments setting. 2. 2-in-1 water tank may not be seated properly. 2. Pick up both the 2-in-1 water tank and formula tank and reseat them so they fit snugly on the unit. 3. 2-in-1 water tank may not be assembled properly. 3. Check to make sure the "lip" of the nozzle is securel
