ページ1に含まれる内容の要旨
Earn BISSELL Rewards!
Register your
product today!
See details on
back page
®
USER'S GUIDE
95P1 / 82H1 SERIES
2
Thank You
3
Safety Instructions
4
Product View
5
Assembly
6-8
Operations
8-12
Maintenance and Care
13
Troubleshooting
Accessories
14
Replacement Parts
15
Warranty
16
Product Registration
16
Consumer Services
ページ2に含まれる内容の要旨
® Thanks for buying a BISSELL CleanView Helix We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your carpet cleaner is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invent
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS ■ When using an electrical appliance, basic do not pick up toxic material (chlorine bleach, precautions should be observed, including ammonia, drain cleaner, etc.). the following: ■ do not use vacuum cleaner in an enclosed space filled with vapors given off by oil base Read all instRuctions befoRe using upRight V acuuM paint, paint thinner, some moth proofing always connect to a polarized outlet (left slot is substances, flammable dust, or other explosive w
ページ4に含まれる内容の要旨
Product view Handle Cord Clip Hose Clip ® TurboBrush Stretch Hose Tool Quick Carry Handle ® Release Cord Power Wrap Cord Crevice Tool Extension Dirt Wand Quick Container HEPA Media Reach Filter* Handle Filter Combination Cup Dusting Brush/ Lock ’n Upholstery Hose ™ Seal Lever Tool Wand Height Base Handle Release Adjustment Pedal Knob Foot Hose Powerfoot Furniture Protection Guard CAUTION: W ARNING: Do not plug in your vacuum Plastic film can be cleaner until yo
ページ5に含まれる内容の要旨
Assembly The only tool you’ll need to assemble your vacuum cleaner is a Philips 2. head screwdriver. Attach handle to vacuum 1. locate the vacuum handle and remove the screw packet taped to the base of the handle. 2. stand the vacuum upright and slide 4. the base of the handle firmly into the grooves at the top of the vacuum body. 3. check to be sure the handle is fitted to the vacuum body. if there is a gap in front, continue to push firmly until the handle is flush. 4. insert the sc
ページ6に含まれる内容の要旨
Operations Handle position Press the handle release pedal with your foot to place your CleanView Helix into one of three cleaning positions. 1. Upright– for storage and above floor cleaning with tools. 2. Normal cleaning – press handle release household floor cleaning tasks. 3. Low cleaning –With the vacuum in CAUTION: normal cleaning position, press handle Before using your vacuum, release pedal again, use for reaching under make sure that the dirt con- low furniture such as tables
ページ7に含まれる内容の要旨
Operations Air flow indicator (select models only) The air flow indicator tells you when airflow in the vacuum is reduced due to a clog in the hose. The indicator NOTICE: will remain green until the airflow is reduced. When it is fully red, the the floor brush will continue to rotate airflow is significantly reduced or while you use your vacuum for above blocked. Follow the steps on page 12 floor cleaning. to prevent carpet dam- to clear a clog. Follow the steps on age, do not lean
ページ8に含まれる内容の要旨
Operations Power cord storage When you have finished using your NOTICE: BISSELL CleanView Helix, return it While vacuuming, certain carpets to the upright position and store the and low humidity conditions may power cord. generate small static discharges. the 1. t urn vacuum cleaner off. discharges are entirely harmless and are not associated in any way with 2. unplug power cord by grasping the the main power supply. polarized plug (not the cord) and dis- connect from outlet. 3. loop
ページ9に含まれる内容の要旨
Maintenance and care Empty Dirt Container continued 5. put the dirt container back in the vacuum and slide the lever to the NOTICE: "lock" position. do not place the dirt container or Note: The dirt container may be other product components in the washed in warm water with a dishwasher. hand wash only. mild detergent. Make sure it is completely dry before replacing. Cleaning the inner & outer circular filter Use only genuine BISSELL style replacement filters in your BISSELL CleanVie
ページ10に含まれる内容の要旨
Maintenance and care Cleaning the pre-motor filter 1. unplug the cleaner from electrical outlet. WARNING: Do not operate cleaner 2. the pre-motor filter protects the motor from with damp or wet filters or debris. it is located underneath the filter cup in the center of the round part of the without all filters in place. lock ‘n seal™ lever. 3. Remove the small round filter and any debris on top of it. Rinse well under warm water, then air dry thoroughly before replacing. Pre-Motor Fi
ページ11に含まれる内容の要旨
Maintenance and care Checking rotating floor brush and drive belt continued . 5. clean strings, hair and other debris from rotating floor brush, paying particular attention to brush ends. 6. clean strings, hair and other debris from motor pulley and drive belt areas. 7. check drive belt carefully for wear, cuts or stressed areas. 8. 8. check air passageway for obstruc- tions. Remove debris from this area. Replace drive belt Use only genuine BISSELL style 9 replacement belts (#32074) in y
ページ12に含まれる内容の要旨
Maintenance and care Clearing a clog 3. Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. 1. unplug cleaner from electrical outlet. 2. empty dirt container. 4. 3. check upper tank for build up or clogs. 4. check the suction inlet for a clog. 5. grasp the quick reach handle and lift hose wand to separate from the suc- tion opening. check for a clog in the base,
ページ13に含まれる内容の要旨
® Troubleshooting - CleanView Helix Vacuum cleaner won’t turn on Possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker Vacuum cleaner won’t pick up dirt Possible causes Remedies 1. Incorrect height adjustment 1. Adjust powerfoot to correct height setting 2. Hose not attached to suction opening 2. Grasp quick reach handle and firmly push hose wand onto the suction opening 3. Crack or hole in hose 3
ページ14に含まれる内容の要旨
® Accessories - CleanView Helix These items are available for purchase as accessories for your BISSELL CleanView Helix: To purchase call 1-800-237-7691 or visit www.bissell.com. Item Part No. Part Name 1 203-2447 t urbobrush tool 2 203-1063 crevice t ool 3 203-1099 combination dusting/upholstery brush 4 203-1084 extension Wand *not all parts are included with every model. 1 2 3 4 ® Replacement Parts - CleanView Helix Item Part No. Part Name 1 32074 style 9 drive belt (2-pack) 2 203-2450 hos
ページ15に含まれる内容の要旨
® Warranty - BISSELL CleanView Helix 95P1 and 82H1 this warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. if you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer services by e-mail, telephone, or regular mail as described below. Limited One Year Warranty subject to the *eXceptions and eXclusions identified below, upon receipt of the product bisse
ページ16に含まれる内容の要旨
Don't forget to register your product! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points automatically earn points for discounts and free shipping on future purchases. Faster Service supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts. Special
