ページ1に含まれる内容の要旨
USER'S GUIDE
58K5 SERIES 220-240V
2
Thank You
3
Safety Instructions
4
Product View
5
Assembly
6-8
Operations
8-13
Maintenance and Care
13-14
Troubleshooting
14
Replacement Parts
14
Accessories
15
Warranty
16
Consumer Services
ページ2に含まれる内容の要旨
Thanks for buying a BISSELL Cleanview™ Pet Ultimate We’re glad you purchased a BISSELL Cleanview Pet Ultimate vacuum. Everything we know about floor care went into the design and con- struction of this complete, high-tech home cleaning system. Your BISSELL Cleanview Pet Ultimate vacuum is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, con
ページ3に含まれる内容の要旨
Thanks for buying a BISSELL Cleanview™ Pet Ultimate IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, ■ Young children should be supervised to ensure basic precautions should be observed, that they do not play with the appliance. including the following: ■ Remove plug from electrical outlet before cleaning or maintaining the appliance. REAd ALL ■ If the supply cord is damaged, it must be replaced by the manufacturer or its service INSTRUCTIONS agent in order to avoid a
ページ4に含まれる内容の要旨
Product view Handle ™ Quick Release Hose Clip Cord Wrap Stretch Hose Dusting Brush/ Carry Upholstery Tool ™ TurboBrush Handle Pet Tool Crevice Tool Twist ‘n Snap™ Power Hose Cord Inner Cyclone Hose Power Switch Wand Upper Tank Extension Wand Easy ™ HEPA Media Empty Dirt Post Motor Container Filter* Washable ™ Lock ‘n Seal Lever Pre-Motor Quick Filter ™ Release Handle Headlight Cord Release Pedal Wrap Foot Window Height Adjustment Hose Wand Base Knob Wide Cleaning Foot
ページ5に含まれる内容の要旨
Assembly The only tool you’ll need to assemble 2. 4. your vacuum cleaner is a Phillips screwdriver. Attach handle to vacuum 1. Locate the handle and cord wrap. Remove the screw packet taped to the handle. 2. Stand the vacuum upright and from the rear of the unit, slide the base of the handle firmly into the grooves at the top of the vacuum body. 3. Ensure that the handle fits firmly to the vacuum body. If there are any gaps, continue to push 1. 3. firmly until the handle is secure. 4.
ページ6に含まれる内容の要旨
Operations Power switch The Power Switch is located on the left CAUTION: side of the vacuum. Push the rocker To avoid personal injury switch “ON” (I) to vacuum, and “OFF” and to prevent the cleaner (O) when cleaning is complete. from falling when cleaning stairs, always place it at the bottom of the stairs. Handle positions Press the handle release pedal, located on the lower left side of the vacuum, with 1. your foot to place your vacuum into one of three cleaning positions. 2. 1.
ページ7に含まれる内容の要旨
Operations Special on-board tools Your vacuum is not only a powerful carpet and rug cleaner, it’s also a Dusting Brush/ versatile above floor vacuum cleaner Upholstery Tool when you select one of the special tools. 1. Raise the handle to the upright position. Crevice Tool 2. Grasp the hose wand handle to separate Extension Wand from hose wand base. Hose Wand 3. Attach tools by firmly pushing onto vacu- um hose, hose wand or extension wand. Be sure the hose and tool fit snuggly together
ページ8に含まれる内容の要旨
Operations Power cord usage 1. To use your vacuum, remove the cord 1. and plug it into an electrical outlet. For your convenience, there is a quick release cord wrap for easy cord remov- al. There is also a cord clip that is part Quick Release of the upper cord wrap where you can Cord Wrap attach the cord when vacuuming. 2. When you are finished cleaning, turn vacuum cleaner off. 3. Unplug power cord by grasping the plug (NOT the cord) and disconnect from outlet. 4. Loop power cord aro
ページ9に含まれる内容の要旨
Maintenance and care Emptying the dirt container 2. The dirt container should to be emp- tied before the dirt reaches the “Full” line on the container. 1. Unplug the vacuum from electrical out- let. 2. Slide the Lock ‘n Seal Lever to the “Unlock” position. Unlock 3. Grasp handle and pull the dirt container 4. straight out to remove from the vacuum. 4. Empty dirt into garbage container. NOTE: Emptying the dirt container after every use will help prevent over filling and ensure that the vac
ページ10に含まれる内容の要旨
Maintenance and care Check rotating floor brush and drive belt You should check your vacuum cleaner’s rotating floor brush and drive belt regu- larly for wear or damage. You should also clean the brush and brush ends of strings, hair and carpet fibers. This type of debris can wrap around the brush and hamper its ability to effectively clean your carpet. Also remove any debris that has accumu- lated under the brush cover. 1. Unplug the vacuum from electrical outlet. WARNING: To reduce
ページ11に含まれる内容の要旨
Maintenance and care Replace drive belt continued 3. Place new drive belt over motor pulley and loop other end over rotating floor brush in the space between the bristles. NOTE: It is important that you use 3. only genuine BISSELL replacement belts. Generic belts may not meet Motor the exact specifications required Pulley to keep your vacuum operating at its peak performance. The use of unbranded belts could lead to early failure of the vacuum and could void your warranty. 4. Pull t
ページ12に含まれる内容の要旨
Maintenance and care ™ Maintaining TurboBrush Pet tool continued 4. 3. Remove the brush from the belt and clean debris. 4. Replace the brush inside the belt and place ends into slots on sides as shown. 5. Reposition top cover making sure to line up inside tab at the front with the open- ing on the cover. Twist collar until open- ing is at the bottom to lock into place. 5. Clearing clogs Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the
ページ13に含まれる内容の要旨
Maintenance and care Cleaning the upper tank continued 5. 4. The inner cyclone and filtration disk may be washed using a mild detergent. Be sure it is completely dry before reassem- bling or damage to your unit may result. 5. Once cleaning is completed, reassemble 6. the filtration disk over the inner cyclone by sliding it straight down on the top of the inner cyclone and turning left. Be sure to line up the tabs when reassembling for proper installation. 6. To replace the inner cyclone
ページ14に含まれる内容の要旨
Troubleshooting Visible dirt escaping from cleaner Possible causes Remedies 1. Dirt container full 1. Empty dirt container 2. Filters missing or installed incorrectly 2. Check pre-motor and post-motor filters for correct installation 3. Dirt container installed incorrectly 3. Pull out and re-insert dirt container correctly Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not
ページ15に含まれる内容の要旨
Warranty - BISSELL Cleanview™ Pet Ultimate This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or contact your local in country distributor. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below,
ページ16に含まれる内容の要旨
BISSELL consumer services If your BISSELL product should require service: Call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in country distributor for questions, service, or repair. If you have questions about your warranty or need replacement parts please contact the numbers below. For UK inquiries: For spare parts and accessories: Monday - Thursday 9 am — 5
