ページ1に含まれる内容の要旨
®
BILLY GOAT MV650SPH and MV600SPE
Self-Propelled Vacuum Owner’s Manual
Accessories
Caster Kit Hose Kit Bag Liner Kit Felt Bag Kit
Use on hard surface For vacuuming hard To collect leaves, Use on all dusty
for maneuverability. to reach areas. thatch, and grass. conditions.
P/N 840129 P/N 840116 P/N 840134 P/N 840194
Part No 840245 1 Form No F060711D
ページ2に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual CONTENTS Specifications and Sound/Vibration ................................................................................................................... 3 Instruction Labels ............................................................................................................................................... 4 Assembly Instructions .........................................................................................
ページ3に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual MV 650 SERIES SPECIFICATIONS MV650SPH MV600SPE Engine Type Honda GSV190AA1A Briggs and Stratton 122MO70110F1 Horsepower 6.5 (4.85 kW) 6.25 (4.66 kW) Fuel Capacity 1.6 qt (1.5 L) 1qt (.9L) Oil Capacity 0.58 qt (0.54L) 0.63 qt (0.59L) Unit Weight 179 lbs (81.2 kg) 179 lbs (81.2 kg) Shipping Weight 208 lbs (94.3 kg) 208 lbs (94.3 kg) Overall Dimensions 28” Wide x 62.5” Long x 45.5” High 28” Wide x 62.5” Long x 45.5” High o o Maximum
ページ4に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT MV Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown. PN 400268 PN 890254 PN 840054 (S
ページ5に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual MV Vacuum Assembly Drawing Form No F060711D 5 Part No 840245
ページ6に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual PARTS LIST Part No 840245 6 Form No F060711D
ページ7に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual ASSEMBLY INSTRUCTIONS ® Your BILLY GOAT MV Vacuum was shipped in one carton, completely assembled except for the Hood/Upper Handle Assembly. Mounting hardware for the Hood/Upper Handle Assembly is temporarily installed on the lower handle and the Housing assembly. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box since Hood/Upper Handle Assembly is attached to the unit by cables.
ページ8に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual 4. Attach upper handle brace to lower handle using 5. Attach rod end (164) to the nozzle door rod then corresponding hardware. Then repeat this step on the secure in place by tightening jam nut. other side. 6. Attach nozzle door rod to the nozzle door using corresponding hardware. NOTE: It is easier to do this with nozzle door closed. - Two 9/16” wrenches. - Two 1/2” wrenches. 7. A
ページ9に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual OPERATION OPERATOR CONTROLS The operator’s position is at the rear of the machine between the handlebars. The operator should STAND in a position to allow both handlebars to be grasped firmly, which allows sufficient leverage to steer the machine. Operator’s controls are shown below. 3 4 6 1 5 2 Operator Control Locations 1 Drive Clutch Lever 4 Throttle Control 2 Bag Latch 5 Drive Shifter Control 3 Pull Starter 6 Nozzle Door
ページ10に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual 3. Secure the unit with left hand at the handle then pull starter rope with right hand to start engine. On Electric models only PULL ROPE STARTER WITH RIGHT HAND SECURE UNIT AT THE HANDLE WITH LEFT HAND DURING START PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid kickback. 4. Move throttle control back to FAST position and allow engine to reach correct operating speed. 5. For Electr
ページ11に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual VACUUM NOZZLE DOOR ADJUSTMENT The vacuum nozzle door adjusts for the maximum performance under various applications. Nozzle fully opened. This is ideal for turf application Nozzle half way opened. This is ideal for hard surface application Nozzle closed for OPTIONAL hose kit. This is ideal for hard to reach places. Form No F060711D 11 Part No 840245
ページ12に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual VACUUMING OPERATION This machine is designed for vacuuming leaves, grass clippings, and other types of organic litter. Debris mixed with cans, bottles, and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose. Vacuuming cans, bottles, and sand will affect the longevity of your machine. In dusty conditions it maybe necessary to purchase Felt Bag Kit (P/N 840022). Do not operate if excessive vibration occur
ページ13に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual CLEARING A CLOGGED NOZZLE DISCONNECT spark plug wire before servicing unit. 1. Shut engine off and wait for impeller to stop completely. 2. Disconnect spark plug wire. 3. Wearing durable gloves, remove clog. WEAR durable gloves. Clog may contain sharp materials. 4. Reconnect spark plug wire. DEBRIS BAG Debris bags are normal replaceable wear items. Frequently empty debris to prevent bag overloading with more weight than
ページ14に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Daily or Every Every 25 Every 50 Every 100-150 Use 5 Hours Hours Hours Hours Inspect for worn or damaged parts. Check for excessive vibration Inspect for loose parts. Clean Debris Bag Lubricate clutch control lever (Use white lithium grease or equiv.) LOCATION 1 Lubricate heig
ページ15に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual IMPELLER REMOVAL READ all safety instructions before servicing unit. DISCONNECT spark plug wire before servicing unit. Tools required: - 1/2” socket, 3/8” drive - ratchet, 3/8” - drive extension, 3/8” drive - universal joint, 3/8” drive - pry bar or long screwdriver - jack stands or similar device adequate to support weight of machine. 1. Wait for engine to cool and disconnect spark plug. 2. Drain fuel and oil from the en
ページ16に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual Procedure: 1. Wait for engine to cool and DISCONNECT SPARK PLUG! 2. Engage the clutch lever then pull the unit back until it stops freewheeling. The clutch lever should engage around 2 5/16” of travel or 4 inches from tip of lever to handle. 3. Tighten or loosen cable adjuster nut next to the clutch lever until drive engages at 4” from handle. 4. Holding the adjuster nut in place with one wrench tighten cable lock nut firmly. 5. Readjust
ページ17に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual INSTALLING NEW DRIVE CHAIN/ALIGNMENT/TENSION READ all safety instructions before servicing unit. DISCONNECT spark plug wire before servicing unit. Tools required: - 7/16” and 1/2” socket. - 7/16” and 1/2” combination wrench. - “Needle nose” pliers - Flat head screwdriver Allow the engine to cool completely and DISCONNECT THE SPARK PLUG. 1. Unfasten and remove the guard. 2. Rotate left rear wheel to bring the chain “master l
ページ18に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual WIRING DIAGRAMS Bag Switch Circuit Schematic Diagram TROUBLESHOOTING Problem Possible Cause Solution Will not vacuum or has poor vacuum · Dirty or full debris bag or filter. · Clean debris bag and filter. Shake bag clean or performance. wash. · Nozzle height set too high or too low. · Adjust nozzle height (see page 14). · Hose kit cap missing. · Check for hose kit cap. · Clogged nozzle or exhaust. · Unclog nozzle or exhaust (see pag
ページ19に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual ILLUSTRATED PARTS LIST Nozzle Assembly Figure 1 Form No F060711D 19 Part No 840245
ページ20に含まれる内容の要旨
MV650SPH Self-Propelled Vacuum Owner’s Manual Nozzle Assembly Parts List PART MV650SPH MV600SPE ITEM NO. NUMBER DESCRIPTION QTY. QTY. 1 350127 YOKE 1/2 - 20 1 1 2 350128 PIN YOKE 1/2" 1 1 3 8024060 BOLT CARRIAGE 3/8-16X1 1/2" ZP 2 2 4 8172009 WASHER 3/8" SAE ZP 2 2 5 8161042 NUT LOCK 3/8-16 LT WT THIN ZP 2 2 6 8041038 SCREWCAP 5/16 -18 x 3 1/2 1 1 7 8160002 NYLON INSERT LOCKNUT 5/16-18 UNC 3 3 8 8172020 WASHER FLAT FENDER 5/16 1 1 9 8161044 NYLON INSERT LOCKNUT 1/2-13 UNC THIN 2 2 10
