ページ1に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual
BILLY GOAT KV VACUUM
Owner's Manual
KV600SP, KV650SPH, TKV650SPH
Accessories
ON BOARD FELT DEBRIS NOZZLE WEAR
CASTER KIT SHREDDER KIT KV LINER KIT
VACUUM BAG GUARD KIT
HOSE KIT
4"(102mm) x For use in For use in To allow for easy Shreds leaves, Increases the life
7' (2.13m) leaves and increasing the rolling and r
ページ2に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual ABOUT THIS MANUAL ® THANK YOU for purchasing a BILLY GOAT KV Vacuum. Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully before assembling, operating, or servicing your equipment. CONTENTS SERIAL PLATE DATA AND SPECIFICATIONS
ページ3に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications KV600SP KV650SPH TKV650SPH Engine: HP 6.0 (4.47kW) 6.5 (4.85kW) 6.5 (4.85 kW) Engine: Type B&S Quantum HONDA HONDA Engine: Model 112K020124E1 GSV190AN1L GSV190AN1L Engine: Fuel Capacity 1.5 qt. (1.4 L) 1.6 qt. (1.5 L) 1
ページ4に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual GENERAL SAFETY INSTRUCTIONS and SYMBOLS The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment. This symbol indicates important information that will prevent injury to yourself or others. This symbol indicates ear protection is recommended when operating this equipment. This symbol indicates eye protection is recommended when operating this equipme
ページ5に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running. DO NOT start or operate engine if strong odor of gasoline is present. DO NOT start or operate engine if gasoline is spilled. Move equipment away f
ページ6に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual SOUND SOUND LEVEL 92 dB(a) at Operator Position Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 7-25-07 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model. General Conditions:
ページ7に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT KV Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown. LABEL DANGER KEEP HANDS
ページ8に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual PACKING CHECKLIST Your Billy Goat KV Vacuum is shipped from the factory in one carton, completely assembled except for the upper handle, debris bag, and bag quick disconnect. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Handle Assembly is attached by cables and folded over PUT OIL IN ENGINE BEFORE STARTING PARTS BAG & LITERATURE ASSY Warranty card P/N- 400972, Owner’s M
ページ9に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual OPERATION Like all mechanical tools, reasonable care must be used when operating machine. Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety. PUT OIL IN ENGINE BEFORE STARTING STARTING ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoli
ページ10に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual OPERATION VACUUMING OPERATION VACUUM NOZZLE HEIGHT ADJUSTMENT: is raised and lowered by pushing slightly downward on handle to reduce tension on the adjuster, and then pulling height adjust trigger on the handle (item 23) up at right rear of machine. Then select the desired height that fits the task. FOR MAXIMUM PICKUP: Adjust nozzle close to debris, but without blocking airflow into the nozzle. NOTE: Never
ページ11に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual COMPOST Vacuumed leaves, grass and other organic material from your own yard can be emptied into a pile or composter to provide enriched soil for later use as fertilizer in gardens and flower beds NOTE: Allow green chips to dry before spreading around living plants. MULCH Wood chips made from branches in your own yard make excellent mulch. A thick blanket of wood chips around plants and flowers to keeps weeds out and moisture in. C
ページ12に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use (daily) Every 5 hrs (daily) Every 25 Hours Inspect for loose, worn or damaged parts. Clean Debris bag Check bag strap tightness Engine (See Engine Manual) Check for excessive vibration IMPELLER REMOVAL 1. Wait for engine to cool and disconnect spark plug. 2. Drain fuel and oil from the en
ページ13に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual BELT TENSION ADJUSTMENT DO NOT ADJUST WHILE THE MACHINE IS RUNNING! 1. Wait for engine to cool and disconnect spark plug. 2. Remove the transmission cover 3. Using two ½” wrenches loosen the two nuts on the cable that connects to the idler arm. 4. The setting of the tension on the belt is controlled by the distance on the threads of the cable. To loosen tension, move the position towards the end of the threads and in the opposite direction to ti
ページ14に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual CHIPPER BLADE REMOVAL AND SHARPENING (TKV ONLY) Chipper blades are normal replaceable wear items. DANGER Chipper blade is sharp. Replace any damaged blade. Depending on the type and amount of wood being chipped, the chipper blade will eventually get dull, losing it’s cutting ability. Evidence of a dull blade is a noticeably reduced chipping ability or a rough cut on end of branch. Note: The chipper blade gap is factory set and should be ch
ページ15に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual Troubleshooting Problem Possible Cause Solution Abnormal vibration. · Loose or out of balance impeller or · Check impeller and replace if required. loose engine Check engine Will not vacuum or has poor · dirty debris bag. Hose kit cap missing. · Clean debris bag. Shake bag clean or vacuum performance ·Clogged nozzle or exhaust. Excessive wash. Check for hose kit cap. Unclog quantity of debris. nozzle or exhaust.
ページ16に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual PARTS DRAWING KVSP/TKVSP TKVSP handle only KVSP Top Plate Asse mbly Part No 891058 Form No F042508A 16
ページ17に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual PARTS LIST KVSP/TKVSP ITEM KV600SP KV650SPH TKV650SPH Description QTY QTY QTY * Denotes NO. PART PART PART standard 1 MAIN FRAME HOUSING KV 891100-S 1 891100-S 1 891100-S 1 2 NOZZLE ASSEMBLY TKV 891110-S 1 891110-S 1 891110-S 1 hardware 3 AXLE FRONT WA KV 891103 1 891103 1 891103 1 item that 4 PLATE TOP WA KVSP 891101-S 1 891101-S 1 891107-S 1 may be 5 IMPELLER SERRATED 14.25 WA KVSP 891104-S 1 891104-S 1 891109-S 1 purchased 6 DOOR EXHAUST ASSY
ページ18に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual MAINTENANCE RECORD Date Service Performed Part No 891058 Form No F042508A 18
ページ19に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual BRUSH CUTTER FORCE BLOWER AERATOR If you liked this product please feel free to view our full line of quality lawn care, renovation, and debris removal products at www.billygoat.com DL VACUUM MULTI VACUUM POWER RAKE Part No 891058 Form No F042508A 19
ページ20に含まれる内容の要旨
KVSP/TKVSP Owner’s Manual Part No 891058 Form No F042508A 20
