ページ1に含まれる内容の要旨
A/V LCD 8-DEVICE WITH LEARNING
UNIVERSAL REMOTE CONTROL (URC-8910)
User’s Guide
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting The Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features And Functions . . . . . . . . . . . .
ページ3に含まれる内容の要旨
INTRODUCTION The One For All A/V LCD 8-Device With Learning Universal Remote Control (URC-8910) is our latest high-performance universal remote control. It is designed to operate up to eight home entertain- ment devices, including TV, video, and audio components. Moreover, this remote control contains sophisticated technology that will allow you to conveniently consolidate the clutter of all of the original remote controls used in your home entertainment system. It’s packed with easy-to-use feat
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
SETTING THE CLOCK 1. On the URC-8910 remote control, press and hold SET until you see the display change from the default device and time to [CODE SET]. NOTE: Default values for device, its code, and time are shown above.Your remote control settings may be different. NOTE: If you wish to exit the programming mode at any time, press EXIT once. You will see an [EXIT] message as the remote control returns to normal operation. NOTE: If you see an [INVALID] message, you have inadver- tently pressed a
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
D N U O S D Key Charts The LED (red light) blinks to show that the remote control is working and sending signals. The LCD (Liquid Crystal Display) provides 15 alphanumeric charac- ters that display status messages during remote control operation and programming.Also, one or more icons appear in the LCD to indicate the following conditions: or Morning or Afternoon Time Low Battery IR Signal Transmission Press TV, VCR, DVD, AUX, SAT, CBL, RCVR/AMP,or CD once to select a desired home entertainment
ページ8に含まれる内容の要旨
FEATURES AND FUNCTIONS Key Charts (continued) Use EXIT to exit from your selected device’s guide or menu. Use INFO to display the current channel and program information. Use VOL+ (or VOL-) to raise (or lower) the audio volume. Press MUTE once to turn the audio off or on. In the TV, VCR, DVD, SAT,and CBL modes, use FAV to scan favorite channels and/or all channels. (See Using Channel Scan and Programming Favorite Channel Scan on page 41.) Use CH+ (or CH-) to select the next higher (or lower)
ページ9に含まれる内容の要旨
Use the transport keys to control your VCR, DVD or CD player, or VOD (Video On Demand) if available on your cable or satellite service. To record a VCR program, press REC twice. Use SLEEP to activate your device’s sleep timer (not available for all devices). After programming, press M1 ~ M3 once to run a desired macro (see Using Macros on page 34). After programming, press L1 ~ L4 once to activate a learned function. (See Using Learning on page 30.) Use PIP to switch the Picture-In-Picture featu
ページ10に含まれる内容の要旨
SETTING UP YOUR COMPONENTS The URC-8910 remote control is preprogrammed at the factory to operate an RCA TV and VCR, a Motorola (GI) cable converter, an RCA satellite receiver, a Pioneer CD player, a Toshiba DVD player, a Pioneer audio receiver/ amplifier, and a One For All home automation device. To control devices other than the default brands, perform the follow- ing steps and repeat them as needed for each device to be pro- grammed; otherwise skip this section: NOTE: For TV/VCR Combo control
ページ11に含まれる内容の要旨
For example, to enter the first GE VCR code (on page 17), press 0 twice, 6 once,0 once, and then SELECT once. If the code is entered correctly, you will see the [SUCCESS] message. 6. Press EXIT to exit the programming mode.You will see an [EXIT SETUP] message as the URC-8910 remote control returns to normal operation. 7. To verify the code works, aim the URC-8910 remote control at the desired device, press its device key once and then press POWER once. The device should turn off. If it does not
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
6. (Optional) Skip this step if your TV/VCR Combo does not have a separate TV code. Otherwise, press TV once.You will see the display change to [TV] and its current code. Use the keypad to enter the separate TV code for your device. 7. Press EXIT to exit the programming mode.You will see [EXIT SETUP] as the URC-8910 remote control returns to normal operation. 8. To verify the code works, aim the URC-8910 remote control at the desired device, press VCR once and then press POWER once. The TV/VCR
ページ14に含まれる内容の要旨
MANUFACTURER’S CODES Setup Codes For TVs: AOC 0030, 0019 Admiral 0093, 0463 Aiko 0092 Aiwa 0701 Akai 0030 Alaron 0179 Ambassador 0177 America Action 0180 Ampro 0751 Anam 0180 Audiovox 0451, 0180, 0092, 0623 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0180 Brockwood 0019 Broksonic 0236, 0463 CXC 0180 Candle 0030, 0056 Carnivale 0030 Carver 0054 Celebrity 0000 Cineral 0451, 0092 Citizen 0060, 0030, 0056, 0092 Concerto 0056 Contec 0180 Craig 0180 Crosley 0054 Crown 0180 Curtis Mathe
ページ15に含まれる内容の要旨
Grunpy 0180, 0179 Hallmark 0178 Harley Davidson 0179 Harman/Kardon 0054 Harvard 0180 Hitachi 0145, 0056, 0016, 0151 Infinity 0054 Inteq 0017 JBL 0054 JCB 0000 JVC 0053 KEC 0180 KTV 0180,0030 Kenwood 0030,0019 Konka 0628,0632,0638,0703,0707 LG 0056 LXI 0047,0054,0154,0156,0178,0747 Logik 0016 Luxman 0056 MGA 0150,0030,0178,0019 MTC 0060,0030,0019,0056 Magnavox 0054,0030,0179,1254 Majestic 0016 Marantz 0054,0030 Matsushita 0250 Megatron 0178,0145 Memorex 0154,0250,0463,0150,0178,0179,0056,0016 Mid
ページ16に含まれる内容の要旨
MANUFACTURER’S CODES Setup Codes For TVs (continued): Proscan 0047, 0747 Proton 0178, 0466 Pulsar 0017, 0019 Quasar 0051, 0250 RCA 0047, 0051, 0093, 0019, 0090, 0679, 0747, 1047, 1147, 1247, 1347, 1447 RadioShack 0047, 0154, 0180, 0030, 0178, 0019, 0056, 0747 Realistic 0154, 0180, 0030, 0178, 0019, 0056 Runco 0017, 0030, 0603 SSS 0180, 0019 Sampo 0030 Samsung 0060, 0030, 0178, 0019, 0056 Sansei 0451 Sansui 0463 Sanyo 0154 Scimitsu 0019 Scotch 0178 Scott 0236, 0180, 0178, 0019, 0179 Sears 0047, 0
ページ17に含まれる内容の要旨
Zenith 0017, 0463, 0016, 0092, 0624 Setup Codes For VCRs: Admiral 0048, 0209 Adventura 0000 Aiko 0278 Aiwa 0037, 0000 Akai 0041 America Action 0278 American High 0035 Asha 0240 Audiovox 0037 Beaumark 0240 Bell & Howell 0104 Broksonic 0184, 0121, 0209, 0002, 0479 CCE 0072, 0278 Calix 0037 Canon 0035 Carver 0081 Cineral 0278 Citizen 0037, 0278 Colt 0072 Craig 0037, 0047, 0240, 0072 Curtis Mathes 0060, 0035, 0041, 0162, 0760 Cybernex 0240 Daewoo 0045, 0278 Denon 0042 Dynatech 0000 Electrohome 0037
ページ18に含まれる内容の要旨
ページ19に含まれる内容の要旨
ReplayTV 0614, 0616 Runco 0039 STS 0042 Samsung 0240, 0045 Sanky 0048, 0039 Sansui 0000, 0067, 0209, 0041, 0479 Sanyo 0047, 0240, 0104 Scott 0184, 0045, 0121, 0043 Sears 0035, 0037, 0047, 0000, 0042, 0104 Semp 0045 Sharp 0048 Shintom 0072 Shogun 0240 Singer 0072 Sony 0035, 0032, 0000, 0033, 0636, 1032 Sylvania 0035, 0081, 0000, 0043 Symphonic 0000 TMK 0240 Tatung 0041 Teac 0000, 0041 Technics 0035, 0162 Teknika 0035, 0037, 0000 Thomas 0000 Tivo 0618, 0636 Toshiba 0045, 0043 Totevision 0037, 0240
ページ20に含まれる内容の要旨
MANUFACTURER’S CODES Setup Codes For TV/VCR Combos : GE 0035 (for TV use 0051), 0048 (for TV use 0093), 0060 (for TV use 0047), 0240 GoldStar 0037 (for TV use 0056) Harley Davidson 0000 Hitachi 0000 Lloyd’s 0000 Magnasonic 0278, 0563 Magnavox 0000, 0081 (for TV use 0054) Magnin 0240 Memorex 0037, 0162 (for TV use 0250), 1037, 1162, 1262 MGA 0240 Mitsubishi 0048 (for TV use 0093) Optimus 0162 (for TV use 0250), 1162, 1262 Orion 0000, 0479 (for TV use 0463) Panasonic 0035 (for TV use 0051), 0162 (
