ページ1に含まれる内容の要旨
OPERATING INSTRUCTIONS
REMOTE CONTROLLER C-RM1000 CU
Thank you for purchasing TOA's Remote Controller. Please carefully follow the instructions in this
manual to ensure long, trouble-free use of your equipment.
ページ2に含まれる内容の要旨
TABLE OF CONTENTS 1. SAFETY PRECAUTIONS .................................................................................. 5 GENERAL DESCRIPTION 2. GENERAL DESCRIPTION ............................................................................... 7 3. FUNCTIONS .......................................................................................................... 7 4. HANDLING PRECAUTIONS ............................................................................ 8 5. CONNECTABLE EQUIPMENT
ページ3に含まれる内容の要旨
9.8. Combination Camera Menu Display ................................................................. 23 9.9. Storing the Preset Positions .............................................................................. 24 9.10. Deleting Preset Position Data (Communication method: Type B only) ........... 24 10. DIGITAL VIDEO RECORDER OPERATION 10.1. Video Recording ................................................................................................ 25 10.1.1. LED indication during r
ページ4に含まれる内容の要旨
12.3.3. Closing the menu .................................................................................. 39 12.4. Function Settings ............................................................................................... 40 12.4.1. Group settings ....................................................................................... 40 12.4.2. Abbreviation .......................................................................................... 41 12.4.3. Abbreviation (Quick display f
ページ5に含まれる内容の要旨
1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction manual handy for future reference. Safety Symbol and Message Conventions Safety symbols and messages described below are used in this manual to pre
ページ6に含まれる内容の要旨
Indicates a potentially hazardous situation which, if mishandled, could CAUTION result in moderate or minor personal injury, and/or property damage. When Installing the Unit • Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock. • When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord itself. Operating the unit with a damaged power supply cord may cause a fire or electric shock.When removing the power
ページ7に含まれる内容の要旨
2. GENERAL DESCRIPTION TOA's C-RM1000 Remote Controller is used to remotely control TOA's 9-channel (C-DR091 series) or 16- channel (C-DR161 series) Digital Video Recorders. It can also remotely control operation of Combination cameras connected to the Digital Video Recorder. The C-RM1000 is equipped with a 3-axis joystick that permits main operation to be performed with one hand. 3. FUNCTIONS Digital Video Recorder Control Digital Video Recorder's recording and playback operation can be remote
ページ8に含まれる内容の要旨
4. HANDLING PRECAUTIONS • Do not connect the AC adapter when using the supplied modular cable since the power is supplied from the Digital Video Recorder. • Do not connect the DVR Control Output Terminal A (RJ-11) to the telephone line. • Do not lift the Remote Controller by joystick or subject the Controller to strong shocks. Damage may be caused to the Controller. • To clean the front panel, wipe with a soft cloth. Do not use thinner or alcohol. • The Remote Controller is designed for indoor
ページ9に含まれる内容の要旨
Definition Digital Video Recorder number (DVR): Refers to the DVR-ID number when the Digital Video Recorders are cascade- connected. Monitor number (MON): Refers to the Digital Video Recorder's monitor output number. There are two monitor outputs: Monitor outputs 1 and 2. Camera number (CAM): Refers to the camera video input terminal number connected to the Digital Video Recorder. Position number (POS): The Combination Camera's orientation can be programmed into a number (1 – 255). Group number
ページ10に含まれる内容の要旨
6. NOMENCLATURE AND FUNCTIONS [ Top Panel ] 1 2 3 4 5 6 7 8 9 10 FOCUS IRIS UP REMOTE CONTROLLER C-RM1000 WIDE TELE PRIORITY DVR MON CAM POS REC MENU N DVR MENU CAM MENU LEFT RIGHT SHIFT F1 1 23 SCREEN FULL MULTI SEQUENCE AUTO F2 4 5 6 DOWN F3 7 8 9 DVR ALARM BUZZER STOP HOLD SEARCH PLAY / LIVE RESET F4 C 0 SET 11 12 13 14 15 16 17 18 FULL MULTI SEQUENCE AUTO 19 20 21 22 (1) LCD Screen (5) Position Key [POS] Displays the setting menu and data of operation Use this key to play back or program th
ページ11に含まれる内容の要旨
(8) Joystick (14) Set Key [SET] Use this key in conjunction with a ten-key In live mode numerical pad to enter abbreviation numbers. Performs pan, tilt, and zoom operation of This key does not work even when pressed connected Combination Cameras. without designating the abbreviated number. In playback mode While the menu is displayed, this key is used to Performs playback, reverse playback, fast confirm settings. forward playback, and pause operation. (15) Search Key [SEARCH] In menu displ
ページ12に含まれる内容の要旨
[ Rear Panel ] 23 24 25 [ Bottom Surface Indications ] GND DVR CONTROL DC IN OUTPUT-A DVR CONTROL OUTPUT-B Do not connect this jack SER. to telephone line. REMOTE CONTROLLER model C-RM1000 CU 12/13.8V 250mA TOA Corporation MADE IN JAPAN (23) DVR Control Output Terminal B (25) AC Adapter Power Input Terminal (screwless type) [ DC IN ] Use this terminal when the supplied modular Connect the DC plug of the dedicated AC cable cannot be used or when connecting the adapter to this terminal. Co
ページ13に含まれる内容の要旨
7. EQUIPMENT SELECTION 7.1. Digital Video Recorder Selection [Example] 1. Press the desired Digital Video Recorder number using a ten-key numerical pad. 7 2. Press the DVR key. LCD screen The selected Digital Video Recorder number is displayed DVR on the LCD screen. (The key cannot be used if the Digital Video Recorder is not connected.) For monitors and 71 1 DVR MENU cameras, Monitor 1 and Camera 1 are automatically DVR MON CAM POS selected. 7.1.1. Group Selection (cascade connection only) N
ページ14に含まれる内容の要旨
7.3. Camera Selection Select the camera to be displayed or operated. [Example] 1. Press the camera number to be selected using the ten-key numerical pad. 1 5 2. Press the CAM key. The selected camera number is displayed on the LCD LCD screen CAM screen (CAM section). 7115 CAM MENU DVR MON CAM POS Camera No. displayed on the full screen 7.3.1. Quick group camera selection (available only when cascade-connected) Specified cameras within the group can be selected using straight number entry. The
ページ15に含まれる内容の要旨
8. MONITOR DISPLAY Functions that can be displayed differ between Monitor outputs 1 and 2. Live mode Playback mode Electronic Cascade Function Zoom output Full 9 Seg 4 Seg 16 Seg* Sequence Full 4 Seg 9 Seg 16 Seg* Monitor output 1 Monitor output 2 Digital Recorder Search Display position Triplex setting Archive Combination Camera Function menu menu setting screen screen menu menu Monitor output 1 Monitor output 2 * Only the C-DR161 Series (16-channel versions) can display. Note Perform the mo
ページ16に含まれる内容の要旨
8.2. Multi-Screen Display The screen switches as follows each time the MULTI key is pressed while in live or playback mode. 9-channel recorder 16-channel recorder 4 Seg A 4 Seg B 4 Seg A 4 Seg B 4 Seg C 4 Seg D 9 Seg 4 Seg C 16 Seg 9 Seg B 9 Seg A Note: Monitor output 2 can display only live images in full-screen and 4-segment split-screen displays. 1. Press the MULTI key after selecting the Digital Monitor screen Video Recorder. (4-segment split
ページ17に含まれる内容の要旨
8.4. 9-Segment Split Screen Display MENU 1. Press the SHIFT key. LCD screen The SHIFT key lights. 9 - SEGME N T 7115 SHIFT Monitor screen (9-segment split screen A) 2. Press the MULTI (9-Split-Screen) key. MULTI MULTI 1 2 3 The MULTI key lights and Camera Nos. 1-9 (9-segment split screen A) are displayed on the monitor. 4 5 6 Lights 7 8 9 Camera No. 2-1. When the 16-channel recorder is used Monitor screen Repeat Steps 1 and 2 to display the camera (9-segment split screen B) nu
ページ18に含まれる内容の要旨
8.6. Changing the Multi-Screen Display Position Live and recorded images can be set to be displayed on user-specified split screen segments, and the display position of the multi-segment split screen can be freely changed. For more information, please read the Digital Video Recorder's instruction manual. 1. With the display mode set to live mode, display the multi- L1 L2 segment split screen to be changed. (Refer to p. 16: Multi- Screen Display.) L3 L4 2. Hold down the MULTI key for 2 seconds o
ページ19に含まれる内容の要旨
8.8. Group Sequential Display Group sequential displays can be performed if "Group" has been selected in the Cascade Connection setting. The Monitor 1 sequential display setting is used for the group sequence function. Notes • Sequential display settings must be performed in advance for the Digital Video Recorder. For the sequence setting method, please refer to the instruction manual enclosed with the Digital Video Recorder. • If the operation level of a digital video recorder within the grou
ページ20に含まれる内容の要旨
8.9. Zoom Display (Electronic zoom) Live or recorded full-screen images can be viewed in 2X zoom display. Multiple-segment split-screens cannot be zoomed. Note "Zoom ON" and "Zoom OFF" must be preprogrammed into a function key or abbreviation number. (Refer to p. 43; Abbreviation (Function programming).) 1. Press the "Zoom ON"-preprogrammed function key or F1 abbreviation number. The arrow is displayed in the center of the screen. OR 2. Using the joystick, move the pointer arrow to the center
