ページ1に含まれる内容の要旨
Operating Your System
With the MX-880
™
CCO OMP MPLLEETTEE
CONTROL
®
UniversalRemoteControl
ページ2に含まれる内容の要旨
This remote control was Custom Programmed for you by: For questions about your Custom Programming call: Custom Programming of a complex home theater and/or a multi-room system is one of the most challenging tasks within an audio/video instal- lation. It involves an intimate knowledge of how the components interact and exact details on the proper sequences of control. Only a Complete Control dealer has the requisite experience and training to quickly and effectively customize a remote control fo
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Introduction 1 Optional RF “No Rules” Operation 2 Installing and Charging the Battery 3 Programming the MX-880 4 Selecting a New “Activity” 5 Using the MX-880 to Control an “Activity” 6 Accessing the MX-880’s Setup Menus 7 Selecting from the Setup Menus 8 Setting the Color Screen 8 Setting the Button Lighting 9 System Menu 10 Setting the Button Beep Volume 11 Date and Time Menus 12 Erasing and Resetting 13 USA Limited Warranty Statement 13 Specifications 14 Contact Us 14
ページ4に含まれる内容の要旨
MX-880 OWNERS MANUAL Congratulations! You’ve purchased a unique synthesis of hardware and software engineering, the Complete Control MX-880. The MX-880 achieves a magnificent combina- tion of power and flexibility, simplifying and automating operation of even the most complex system. User Configurable Screen and Button Lighting A built in pick up sensor can be set to light the screen and/or the buttons automatically. Additionally, a dedicated LIGHT button enables the user to backlight the button
ページ5に含まれる内容の要旨
MX-880 OWNERS MANUAL Optional RF “No Rules” Operation In combination with a Complete Control RF Base Station, the MX-880 can control your system without being in line-of-sight of the equipment. To preserve good operation always utilize a Narrow Band RF Base Station with RF Addressing. RF Addressing gives you the ability to control equip- ment locations throughout your home, even if they are concealed in other rooms or are behind closed doors. 1. The MX-880 sends radio waves in every direction,
ページ6に含まれる内容の要旨
MX-880 OWNERS MANUAL Installing and Charging the Battery Open the battery cover by pressing on the release clip and removing the cover. Note that the three contacts on the battery must connect to the three spring-loaded contacts in the MX- 880. Angle the battery into the bat- tery compartment, contacts first, then gently fit the rear of the battery into the compartment as well. Replace the battery cover by insert- ing the hinged end in first, then snapping the cover back into place. You can char
ページ7に含まれる内容の要旨
MX-880 OWNERS MANUAL Programming the MX-880 The MX-880 is programmed via a Windows PC equipped with a USB port (programming cable included), using our proprietary software, MX-880 Editor. To fully automate an audio/video system the programmer must have a detailed knowledge of each component and how the system is connected and operated. We highly recommend that you use a professional audio/video installer to program your MX-880 so you will be able to enjoy all the benefits of the MX-880. Page 4
ページ8に含まれる内容の要旨
MX-880 OWNERS MANUAL Selecting a New “Activity” The MX-880’s WATCH and LISTEN buttons display the activities you can control with your MX-880. When you want to watch something else (a DVD movie, a videotape or an HDTV broadcast), simply press the WATCH button and select the new activity. When you want to listen to the radio or to a CD, touch the LISTEN button and select what you would like to listen to. Your installer will have programmed the button you pressed to totally con- figure your system
ページ9に含まれる内容の要旨
MX-880 OWNERS MANUAL Using the MX-880 to Control an “Activity” Once you’ve selected a new activity, the MX-880 displays the title of the activity at the top of the screen. Below the title, the LCD displays the cus- tomized names of any special features you need for the activity. All the hard buttons of the MX-880 have now changed to functions optimized for this activity. The Title displays The LCD button what activity you labels describe can control. special features for this activity. Press e
ページ10に含まれる内容の要旨
MX-880 OWNERS MANUAL Accessing the MX-880’s Setup Menus The MX-880 has internal setup menus that enable you to change the settings that control your color screen, the button lighting, battery warnings and the clock. To access these settings, you must press and hold two buttons at the same time as shown here: At the same time, press and hold both the WATCH but- ton and the ENTER button. When the SETUP screen appears, you can release the two buttons. Page 7
ページ11に含まれる内容の要旨
MX-880 OWNERS MANUAL Selecting from the Setup Menus There are two pages of settings on the Setup Menu. Use the page buttons to view them. To select, simply press the corresponding button. Select the setting you’d like to adjust by pressing the button beside the screen. Use the Page button to see other pages. Exit the Setup Menus by pressing the WATCH or LIS- TEN button, or simply waiting (the setup menus time out in 30 seconds). Setting the Color Screen Although usage of the color screen will af
ページ12に含まれる内容の要旨
MX-880 OWNERS MANUAL Setting the Screen Pick Up Sensor Use the buttons next to YES and NO. If you say YES, the color screen will light as long as you are moving the MX-880. If you say NO, the screen will light when you press any button. Use the YES and NO buttons to set the Pick Up sen- sor. Press the SAVE button to save your setting. Setting the Screen Auto Turn Off Use the buttons next to LESS and MORE to adjust the amount of time the screen will stay lit when you stop moving it (Pick Up Senso
ページ13に含まれる内容の要旨
MX-880 OWNERS MANUAL Setting Button Lighting Automatic On Use the buttons next to YES and NO. If you say YES, the buttons will light whenever the LCD screen is on. If you say NO, the buttons will only light when you press the LIGHT button. Use the YES and NO buttons to set the button back lighting to automatically turn on or not. Press the SAVE button to save your setting. Setting the Button Lighting Auto Turn Off Use the buttons next to LESS and MORE to adjust the amount of time the buttons wil
ページ14に含まれる内容の要旨
MX-880 OWNERS MANUAL Power Remaining and Battery Warning Settings On this screen, you can see how much battery charge remains and you can reset the “Low Battery” warning to either 10, 20 or 30 percent. The battery indicator at the top left of the MX-880 screen will flash when your low battery warning level is reached. Note the current remaining battery charge here. Use the LESS and MORE buttons to set the battery warning. Press the SAVE button to save your setting. System Info See how much memor
ページ15に含まれる内容の要旨
MX-880 OWNERS MANUAL Date and Time Menus Via the three menus for Date and Time you can set the date, set the time and opt to display either the date or the time. Setting Time Tap the button beside hour or minutes then use the number keys to enter the correct time. Set the AM/PM by toggling the button. When the time is correct, press the SAVE button. Select the field you’d like to change, then use the Number buttons on the MX-880 to enter hours or minutes. Press this button to change AM to PM or
ページ16に含まれる内容の要旨
MX-880 OWNERS MANUAL Erasing and Resetting You can erase your MX-880 (all of your work, all devices, all activities will be lost) and reset it to the factory default configuration. Use the CANCEL button to exit without erasing. Press the ERASE button to erase all your work. USA Limited Warranty Statement Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product
ページ17に含まれる内容の要旨
MX-880 OWNERS MANUAL applied serial number has been altered or removed from the product. This Limited Warranty is valid only in the United States of America. This Limited Warranty specifically excludes products sold by unauthorized resellers. UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THERE IS NO OTHER WARRANTY EXPRESSED OR I
ページ18に含まれる内容の要旨
MX-880 SETUP NOTES Your Listen Devices List any component or device you’d like to access via the Listen menu: Type of Device (TV, DVD, VCR etc.) Brand Model Page 15
ページ19に含まれる内容の要旨
MX-880 SETUP NOTES Your Watch Devices List any component or device you’d like to access via the Watch menu: Type of Device (TV, DVD, VCR etc.) Brand Model Page 16
ページ20に含まれる内容の要旨
™ C CO OMP MPLLEETE TE CONTROL ® UniversalRemoteControl 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com
