ページ1に含まれる内容の要旨
&
OPERATING INSTRUCTIONS IN BRIEF
The remote control Front of the set
RECORDn m
Record Standby
STANDBYm
Standby Pp
Programme number Plus/Minus
SV/V+
’SHOWVIEW’ programming
Sp
Volume control
TIMERk
TIMER programming on the set
5
Record
CLEARb
Reset/clear
H
Rewind/Reverse scanning
0-9
Digit buttons 0-9
h
Pause/Stop
STOPh
Pause/Stop
G
GPLAY Playback
Playback
D I
Menu left Forward wind/ Forward scanning
C
Menu right J
Cassette eject
Sp
Volume control
w
Headphones socket
A
menu Up
B
menu Down
Pp
Prog
ページ2に含まれる内容の要旨
& Programming with ’SHOWVIEW’ How to enter, check or clear a TIMER-block manually All the information required for programming is encoded in the ’SHOWVIEW’ code. TIMERk 1 Press the button. SV/V+ 1 Press the button on the remote control. 2 Select a free TIMER block or the TIMER block you want to check or clear. 2 Enter the entire ’SHOWVIEW code’. This code (up to 9 digits) is found next to the start time of CLEARb 3 Clear: Press the button. a TV programme in your TV guide. D C 4 Enter/Check: Pres
ページ3に含まれる内容の要旨
OPERATING INSTRUCTIONS PHILIPS 14PV182/58 Congratulations on the purchase of one of the most sophisti- Contents Page cated and simple-to-use television/video recorders combina- tions (TV combi) on the market. With this TV combi you can 1. INSTALLATION ................................ 2 record and play VHS-standard cassettes. Connecting additional equipment .................. 2 Emergency interrupt ............................ 2 User guide .................................... 2 Making standard set
ページ4に含まれる内容の要旨
1. INSTALLATION Connecting the cables Connecting additional equipment You can also connect additional equipment to the EXTERNAL socket, for instance, a decoder satellite receiver or camcorder. Emergency interrupt 2 1 Insert the aerial plug into the socket. Both the set and the remote control have an ’Emergency STANDBYm interrupt’ button. You can use the button to in- If you use the auxiliary aerial supplied, push the aerial into terrupt any function. the mounting on the back panel until it snaps
ページ5に含まれる内容の要旨
3 Wait until all TV channels have been stored. Making standard settings All TV channels will be stored from programme number 69 downward. STOPh D 1 To start, press the button. Press the C button and the button simultaneously. How you can search for a TV channel manually, you can read in chapter 4 ’SPECIAL FEATURES’ in the section ’Manual channel search’. INSTALLATION vw Note: LANGUAGE EN * If the ’Automatic channel search’ function is activated, COUNTRY UK AUTO STORE any previously programmed TI
ページ6に含まれる内容の要旨
2. PLAY BACK 1 Insert a cassette into the cassette slot. Tape position/Index search GPLAY 2 Press the play back button. OK Tape position: If you press the button the tape position H I 3 Picture search: Now press the (rewind) or will be shown in the display during Wind, Rewind, Record, (wind) button once or several times. Play back and Pause/Stop. STOPh 4 Interrupt: Press the button. Index search: Every time you start to record, the tape is marked with a code mark. H 5 Wind: Stop the tape and pre
ページ7に含まれる内容の要旨
3. RECORD 1 Insert a cassette. Programme a recording Pp 2 Use the button to select the programme number The set needs the following information for every pro- from which you wish to record, e.g.: ’P 01’. grammed recording: RECORDn 3 Press the button. * the date on which the recording is to be made * the programme number for the TV channel STOPh 4 Use the button to stop the recording. * the start and end time of the recording * VPS on or off 5 If, whilst recording, you want to switch off the TV s
ページ8に含まれる内容の要旨
Programming with ’SHOWVIEW’ How to enter, check or clear a TIMER block manually All the information required for programming is encoded in the ’SHOWVIEW’ code. TIMERk 1 Press the button. SV/V+ 1 Press the button on the remote control. 2 Select a free TIMER block or the TIMER block you want 2 Enter the entire ’SHOWVIEW code’. This code (up to 9 to check or clear. digits) is found next to the start time of a TV programme in your TV guide. CLEARb 3 Clear: Press the button. If you entered an incorre
ページ9に含まれる内容の要旨
4. SPECIAL FEATURES 5 Select and confirm the ’FEATURES’ line. On Screen Display (OSD) 6 Select and confirm the ’PP RECALL’ line. You can switch OSD on or off. MENU 7 Press the button. The set will use this setting. MENU 1 Press the button. 2 Select and confirm the ’FEATURES’ line. Sleep function (switch off) You can programme your set to switch off after a predeter- FEATURES vw mined period. PP RECALL ON TIMER SLEEPTIMER 0 DISPLAY FULL MENU 1 Press the button. CHILD LOCK OFF SET CLOCK 2 Select a
ページ10に含まれる内容の要旨
Child lock Manual channel search MENU 1 Press the button. In certain cases the Automatic Channel Search may not be able to find all of the TV channels (e.g.: coded TV channels). You can then use this manual method to set the channels. 2 Select and confirm the ’FEATURES’ line. STOPh 1 Switch on the set with the button. Press the 3 Select the ’CHILD LOCK’ line. D C button and the button simultaniously. 4 Switch the child lock on or off. 2 Select and confirm the ’MANUAL STORE’ line. MENU 5 Press th
ページ11に含まれる内容の要旨
Before you call an engineer If, contrary to expectation, you experience any difficulty in operating this TV Combi, please call the customer service in your country. You will find the telephone numbers in the enclosed guar- antee leaflet. The set does not respond to any button being pressed: No power supply. Technical disturbance: disconnect from the mains for 30 seconds, then re-connect. The power switch on the side panel is switched off. Child lock is active. Cassette jammed: Don’t us
ページ12に含まれる内容の要旨
10
ページ13に含まれる内容の要旨
11
ページ14に含まれる内容の要旨
12 3103 166 20311 14PV182/58 8135/003 (WwnnNNNwwnwNNnwnWwnNNNwwnWnnnW)
