ページ1に含まれる内容の要旨
12-1717.fm Page 1 Monday, July 12, 1999 9:26 AM
Cat. No.
12-1717
Three-Way Flush- WIRING THE
Mount Car Speakers SPEAKERS
Your Optimus Three-Way Flush- All RadioShack autosound systems
Mount Car Speakers provide clean come with four color coded speaker
sound and each speaker can handle wires. The following chart shows Ra-
up to 30 watts. The panel-mount de- dioShack’s standard color codes.
sign lets you easily mount the speak-
ers so that they are flush with the
Speaker Terminal Wire Color
m
ページ2に含まれる内容の要旨
12-1717.fm Page 2 Monday, July 12, 1999 9:26 AM Two-Speaker System MOUNTING THE SPEAKERS Follow these steps to mount the speakers. 1. Remove the door panel you want to mount the speaker on and find a location where the speaker will Four-Speaker System fit. Most vehicles have a prepared cut-out area in the door for speaker placement. Use the sup- plied template to be sure the loca- tion you choose is large enough for the speaker opening. Note: To be sure the speaker will not interfere with yo
ページ3に含まれる内容の要旨
12-1717.fm Page 3 Monday, July 12, 1999 9:26 AM 3. Drill a starter hole inside the out- 6. Replace the door panel. Then, lined area. Carefully remove the pull the wires through the hole you area you marked, using a razor, made for the speaker and connect tin snip, or a hacksaw blade. the wires to the speaker’s termi- nals. See “Wiring the Speakers.” 1 4. Drill three /8-inch mounting holes. 7. Mount the speaker as needed. • If you mount the speaker on a metal surface, align the mount- ing hole
ページ4に含まれる内容の要旨
12-1717.fm Page 4 Monday, July 12, 1999 9:26 AM SPECIFICATIONS 1 Woofer ........................................................................................................ 5 /4 Inch Midrange ........................................................................................................ 2 Inch Piezo Tweeter ................................................................................................ 1 Inch Magnet Weight..........................................................