ページ1に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 1 Tuesday, May 27, 2008 1:55 PM
Titan Remote Control
Users Guide
Pour les instructions en français, veuillez
consulter www.urcsupport.com
Para instrucciones en español, por favor
consulte www.urcsupport.com
PREPROGRAMMED FOR YOUR SET-TOP BOX
ページ2に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 2 Tuesday, May 27, 2008 1:55 PM TABLE OF CONTENTS Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Basic Setup: Progr
ページ3に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 3 Tuesday, May 27, 2008 1:55 PM FEATURES Control Your Home Theater Equipment The Titan universal remote control comes pre- programmed to operate the set-top box that is supplied by your service provider. In addition, Titan can be programmed to control 4 additional home theater equipment devices. Learning If you would like to add certain control functions to Titan that exist on another remote control, you can copy those functions from the original remote
ページ4に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 4 Tuesday, May 27, 2008 1:55 PM FEATURES AND FUNCTIONS Use the illustration below to locate features on the Titan Remote Control and then study the Key Charts (on the next three pages) to learn how they function. www.urcsupport.com 4
ページ5に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 5 Tuesday, May 27, 2008 1:55 PM Key Charts Key Function Use SETUP for all programming SETUP sequences. Press POWER once to turn on or off a home theater device. For MASTER POWER control, see “Using the Master Power Key” on page 19. Press AUX, DVD, AUD, TV, or STB once to select a home entertainment device to control. Each key has a red LED that blinks each time a key is pressed to indicate the current operating mode. Press SKIP BACK to instantly rep
ページ6に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 6 Tuesday, May 27, 2008 1:55 PM Key Function Use PAGE+ (or PAGE-) to page up (or page down) through menu screens and the program guide. Use A, B, C, or D as shortcuts to access additional features available honour set-top box menu screens, program guide, and interactive applications. . Use VOL+ (or VOL-) to raise (or lower) the audio volume. Press ON DEMAND for direct access to On-Demand programming and other interactive services. Use CH+ (or CH-)
ページ7に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 7 Tuesday, May 27, 2008 1:55 PM Key Function Use PIP ON/OFF to open or close PIP window. Use SWAP to swap the primary viewing channel with the PIP channel. For a DVR/PVR, SWAP can be used to switch the active channel tuner. Use MOVE to move the PIP window location. Press PIP+/PIP- to change the PIP channel. INSTALLING BATTERIES 1 2 3 1. On the back of the remote control, press your thumb on the indentation on the battery door and slide the battery d
ページ8に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 8 Tuesday, May 27, 2008 1:55 PM 3. Slide the battery door back into place. It should securely fasten to the remote. 4. Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) will blink once. NOTE: When batteries need replacement, the active mode LED will blink 5 times upon each key- press. Replace the batteries and the unit will be restored to its full functionality, complete with your f
ページ9に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 9 Tuesday, May 27, 2008 1:55 PM NOTE: If the selected mode LED emits a long blink, the entry is invalid. Repeat steps 2 through 4 and try entering the same code again. 5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (“Searching for Your Code” starti
ページ10に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 10 Tuesday, May 27, 2008 1:55 PM 1. Turn on your TV. 2. On the remote control, press TV once; it blinks once. Then press and hold SETUP until the TV key blinks twice. 3. Enter 9 9 1. The TV key blinks twice. 4. Enter one of the following four digits: COMPONENT TYPE COMPONENT ID # Set-Top Boxes (Cable, Sat, etc.) 0 TV 1 DVD/VCR/DVR 2 Audio Devices 3 5. Aim the remote control at the TV and press POWER once. 6. Press and release the CH+ key continuous
ページ11に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 11 Tuesday, May 27, 2008 1:55 PM CHECKING THE CODES If you have programmed one of your Titan remote's mode keys by searching for your device code (on the previous page), you may need to find out which five- digit code is operating your equipment. For example, to find out which code is operating your TV: 1. On the remote control, press TV once; it blinks once. Then press and hold SETUP until the TV key blinks twice. SETUP 2. Enter 9 9 0. The TV key bli
ページ12に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 12 Tuesday, May 27, 2008 1:55 PM � Learning capacity is approximately 16 to 25 keys, depending on the code being learned. � Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats. � For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights. NOTE: Please have your original remote controls handy before programming learn
ページ13に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 13 Tuesday, May 27, 2008 1:55 PM tions” on the previous page. If needed, also see “Troubleshooting” on page 23. After review, start programming again at step 1. 5. Repeat steps 2 through 4 for another mode SETUP and/or key or press and hold SETUP to exit programming. Deleting a Single Learning Key This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to
ページ14に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 14 Tuesday, May 27, 2008 1:55 PM PROGRAMMING VOLUME LOCK Volume Lock allows you to set your remote to direct all volume commands to whichever home theater device you designate as your audio source. By default, Global (All) Volume Lock is set to TV, so you can control TV volume while in any mode on your remote. You can also perform Volume Lock on a selected device or set of devices to set Volume Lock to function on some modes, but not on others. Locki
ページ15に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 15 Tuesday, May 27, 2008 1:55 PM 4. Press each mode key that relates to the devices that you do not use for volume control. These will be the modes in which the volume functions control the device related to the mode key you pressed in step 1. Any mode omitted from this step will have all volume controls assigned to that mode's device. 5. Press SETUP to save. The mode LED blinks SETUP twice. Unlocking All Volume Locks Performing these instructions sets
ページ16に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 16 Tuesday, May 27, 2008 1:55 PM 2. Enter 9 7 3. The mode LED (e.g., TV) blinks twice. 3. Press CH+ once. The mode LED (e.g., TV) blinks once. 4. Press the mode key for the device that you want to use for channel-changing. The mode LED blinks twice. Now, regardless of what mode you select, the channel keys will only change channels on the assigned device. Locking Channel Control for Specific Device Modes To set Channel Lock for some device modes, bu
ページ17に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 17 Tuesday, May 27, 2008 1:55 PM Unlocking Channel Control To unlock Channel Lock and thus allow the channel control functions to work with the device associated to the active operating mode, follow these steps: 1. Press and hold SETUP until the mode LED SETUP blinks twice. 2. Enter 9 7 3. The mode LED blinks twice. 3. Press CH- once. The mode LED blinks four times. Now the channel functions correspond to the active mode (e.g., press CH+ in TV mode an
ページ18に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 18 Tuesday, May 27, 2008 1:55 PM Programming a Macro Key 1. On the remote control, press and hold SETUP SETUP until the mode LED blinks twice. 2. Enter 9 9 5. The mode LED blinks twice. 3. Select a macro key (for example, F1) and press it once. The mode LED blinks once. 4. Press the key sequence you want to program into the macro. For example, to turn on your TV and raise its volume, press TV, POWER, VOL+, VOL+, VOL+.... NOTE: You can program up to 15
ページ19に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 19 Tuesday, May 27, 2008 1:55 PM page 18). If desired, repeat these to clear another Tune- In key. USING THE MASTER POWER KEY The Titan Remote Control has a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press. NOTE: MASTER POWER only works in the STB mode. In any other mode, pressing MASTER POWER once will turn the selected device on or off. Programming the Master Power Ke
ページ20に含まれる内容の要旨
Titan OCAP Remote Control.fm Page 20 Tuesday, May 27, 2008 1:55 PM Using the Master Power Key 1. Press STB once. 2. Press POWER. The remote sends a power command to each device that was included in the Master Power Macro. Clearing the Master Power Key 1. On the remote control, press STB once. 2. Press and hold SETUP until the mode LED SETUP blinks twice. 3. Enter 9 9 5. The mode LED blinks twice. 4. Press POWER once. 5. Press and hold SETUP until the mode LED SETUP blinks twice. ww
