ページ1に含まれる内容の要旨
pg
TOSHIBA
C300*
C350*
R350*
Series
ページ2に含まれる内容の要旨
pg
ページ3に含まれる内容の要旨
English gg Contents SETTING UP Safety precautions – Some do’s and don’ts for you to be aware of 4 Installation and important information 5 The remote control – an at-a-glance guide 6 Connecting external equipment – a guide to connecting external equipment to the back of the television 7 Connecting a computer – connecting a computer to the back of the television 8 Connecting REGZA-LINK – connecting Toshiba REGZA-LINK equipment 9 Controls and input connections – switching on the television, stand
ページ4に含まれる内容の要旨
gg Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. DO NOT REMOVE ANY FIXED COVERS AS THIS Air Circulation WILL EXPOSE DANGERO
ページ5に含まれる内容の要旨
English gg Installation and important information Where to install Locate the television away from direct sunlight and strong Sturdy tie lights, soft, indirect lighting is recommended for (as short as possible) comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Clip Place on a sturdy platform, the mounting surface should be flat and steady. It must be secured to the wall with a Clip Clip sturdy tie using the clip on the back of the stand, or secured to
ページ6に含まれる内容の要旨
gg The remote control UP Simple at-a-glance reference of your remote control. To select mode For On/Standby mode Number buttons To select input from external sources To return to the previous programme Active for Toshiba ancillary equipment To change programme positions and To alter the volume text pages To mute the sound On-screen Menus To exit Menus When using menus the arrows move the cursor on the screen up, down, left or right. OK to confirm your selection Active for Toshiba ancillary equi
ページ7に含まれる内容の要旨
English The cable holder can be used for aerial, media recorder and audio cables. Do not use as a handle and remove all cables before moving the television. gg Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. COMPONENT VIDEO (EXT3) SCART 2 (EXT2) SCART 1 (EXT1) CABLE HOLDER FIXING STRAP MEDIA REC. decoder* TV HDMI™ INPUT SOCKETS media recorder IN/OUT SAT NOTE: It is recomm
ページ8に含まれる内容の要旨
gg Connecting a computer Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. the back of your television Audio cable for PC to television connection (not supplied) Computer Mini D-sub 15 pin connector RGB PC cable (not supplied) Conversion adaptor if required (not supplied) Connect the PC cable from the computer to the PC The following signals can be displayed: terminal on the back of the television. VGA:
ページ9に含まれる内容の要旨
English gg Connecting REGZA-LINK The basic functions of connected audio/video equipment can be controlled using the televisions remote control if a REGZA-LINK compatible device is connected. the back of your television AV amplifier Playback equipment HDMI IN HDMI OUT HDMI OUT Playback equipment HDMI OUT NOTE: It is recommended that for correct operation all NOTE: The REGZA-LINK feature uses CEC Technology audio/video devices are connected using HDMI cables as regulated by the HDMI standard. This
ページ10に含まれる内容の要旨
Input 3 (side) will take priority over EXT3 (back) if both connections are used at the same time. gg Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. RED LED – Standby Standby GREEN LED – Power on (LED1) GREEN LED – On timer (LED 2) INPUT 3 (
ページ11に含まれる内容の要旨
English gg Tuning the television using Quick Setup, sorting programme positions Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 6. Connect the television to the mains power and With the list of stations now showing use f or e 5 1 to highlight the station you want to move and press the button. The Quick Setup screen will i appear. press x. The selected st
ページ12に含まれる内容の要旨
Different Channel numbers may be displayed gg Manual tune The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System. Use z and x to move across the screen and select any of these Manual Tune options. Programme Programme System Colour Channel Search Manual fine Station system skip tuning Programme: The number to be pressed on the remote control. System: Sp
ページ13に含まれる内容の要旨
English gg Manual tune continued, Programme skip When your media recorder signal is found, press 8 Programme skip x to move along to Station. With f, e, z and put in the required characters, x e.g. VCR. To prevent certain programmes from being viewed, the programme position can be skipped. The remote control must be removed as the channels will still be available using Manual tuning the number buttons. Programmes can then be watched as Station normal using the controls on the television, but t
ページ14に含まれる内容の要旨
gg Auto tune, general controls, sound controls Using Auto tuning Selecting programme positions To set up the television using Auto tuning, press To select a programme position use the numbered 1 MENU and use or to select the SET UP buttons on the remote control. z x menu. Programme positions can also be selected using PP and PQ. To revert to the previous programme position press . ^^ SET UP 1/2 Language English To display on-screen information i.e. programme position,
ページ15に含まれる内容の要旨
English gg Sound controls continued, SRS WOW™ sound ® effects, dual, stable sound WOW Bass boost SRS 3D On FOCUS Off Bass boost enhances the depth of the sound on the TV TruBass Off speakers. The difference will only be noticeable on sound with a strong bass. MENU Back EXIT Watch TV In the SOUND menu press e to highlight Bass 1 boost. Use or to select On. z x Press e to highlight SRS 3D and using 3 or select between On or Off. z x Then press e to highlight Bass boost level and 2 using z or x a
ページ16に含まれる内容の要旨
gg Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the button repeatedly to select between Wide, Super Live 2, Cinema 2, 4:3, Super Live 1, { Cinema 1, Subtitle and 14:9. SUPER LIVE 1 This setting will enlarge a 4:3 image to fit the screen by stretching the image horizontally and vertically, holding better proportions at the centre of the image. Some distortion may occur. SUPER LIVE 2 If a ‘side panel format’ signal
ページ17に含まれる内容の要旨
English gg Widescreen viewing continued Use this setting when watching a 14:9 14:9 broadcast. Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of WIDE widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 4:3 broadcast. When using a PC connected via HDMI this setting will show the picture PC without over scan, i.e. WYSIWYG. Press
ページ18に含まれる内容の要旨
gg Picture controls Picture position Backlight The picture position may be adjusted to suit personal Adjusting the Backlight can improve the clarity of the preference and can be particularly useful for screen when viewing. external inputs. In the PICTURE menu press e to select 1 In the SET UP menu press e until Picture settings, then press OK. 1 Picture position is highlighted. PICTURE SET UP 1/2 Picture settings OK Language English 3D Colour management Off Country UK Ba
ページ19に含まれる内容の要旨
English gg Picture controls continued Picture preferences MPEG NR – Noise Reduction When watching a DVD the compression may cause some This television offers the choice of personalising the picture words or picture elements to become distorted or pixelated. style. Press m to view the different styles available: Using the MPEG NR feature reduces this effect by Picture mode-1 to 3 are preset options and effect many smoothing out the edges. features/settings within the television, Picture mode-M
ページ20に含まれる内容の要旨
gg Picture controls continued Base colour adjustment 3D Colour management Hue Saturation Brightness Red +2 +6 +4 Green 0 0 0 When 3D Colour management is selected it allows the ‘Base colour adjustment’ feature to become available. Blue 0 0 0 Yellow 0 0 0 In the PICTURE menu press e to select Magenta 0 0 0 1 3D Colour management. Cyan 0 0 0 Reset OK MENU Back EXIT Watch TV PICTURE To return to the original factory settings select Picture settings OK Reset and press OK. 3D Colour management O
