ページ1に含まれる内容の要旨
XXV
MT OLYMPUS
SUBWOOFERS
OLM800D2 / OLM800D4
ページ2に含まれる内容の要旨
MT OLYMPUS SERIES CAR AUDIO SUBWOOFERS Congratulations on your purchase of the new Hifonics MT OLYMPUS Series High Power subwoofer system. The MT OLYMPUS subwoofer series offer superior sonic accuracy, intense high power sound quality with exotic build materials and outstanding good looks. These subwoofers are ideal for high power listening levels. OLM800D2 / OLM800D4: One-Piece Pressed Paper Cone/Dustcap High Roll Santoprene Rubber Surround Reinforced Cone-Neck Joint Optimally Spaced Dual Spide
ページ3に含まれる内容の要旨
SUBWOOFER INSTALLATION AND WIRING DIRECTIONS Enclosure Materials Typically, 5/8” or 3/4” MDF (Medium Density Fiber Board) is best for most applications. 3/4” MDF is recommended. Enclosure Build Materials Connecting joints need to be glued and screwed to ensure no air escapes and joints do not separate under high pressure. Mitered and rabbit joints also help to ensure the enclosure joints are secure. Bracing Internal bracing is also recommended to prevent flexing and to strengthen the enclosure.
ページ4に含まれる内容の要旨
3
ページ5に含まれる内容の要旨
Glossary of Terms Q The energy losses of relative damping (ratio of stored to dissipated energy or ratio of reactive to resistive energy). Fs Free air resonance of driver in Hz. Qms Mechanical Q. Vas Volume of air equivalent to driver from the rest position. Cms Mechanical compliance of a loud speaker piston. Mms Moving mass of total loud speaker piston assembly. Xmax The maximum linear excursion of a loud speaker. Sd Surface area of the cone. Dia The piston diam
ページ6に含まれる内容の要旨
OLM800D2 DVC 2-Ohms PARALLEL SERIES - - + + + + + + 1-Ohm 4-Ohms - - - - PARALLEL COILS / PARALLEL SUBS - - + + + + + .5-Ohms - - - SERIES COILS / PARALLEL SUBS - - + + + + - - - + 2-Ohms 5
ページ7に含まれる内容の要旨
OLM800D4 DVC 4-Ohms PARALLEL SERIES - - + + + + + + 2-Ohms 8-Ohms - - - - PARALLEL COILS / PARALLEL SUBS - - + + + + + 1-Ohm - - - SERIES COILS / PARALLEL SUBS - - + + + + - - - + 4-Ohms 6
ページ8に含まれる内容の要旨
MT Olympus Series Subwoofer Dimensions A B C A B C MODEL Outside Diameter Mounting Depth Cutout Diameter OLM800D2 12.64” 6.03” 10.77” OLM800D4 12.64” 6.03” 10.77” NOTE: There must be atleast 2” of clearance from the back of the subwoofer to the enclousre. 7 14
ページ9に含まれる内容の要旨
Maxxsonics Limited Warranty As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audi products, Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Year from date of purchase. All other parts and accessories of the system are warrantied to be free from defects in material and workmanship for one (1) year from date of purchase. Maxxsonics will repair or replace at it’s option and fr
ページ10に含まれる内容の要旨
Part # F0112
